General
Property | Value | Temperature |
---|---|---|
Density | 2.68 g/cm³ Show Material materials with Density of 2.68 g/cm³ at 20.0 °C | 20.0 °C |
2.67 g/cm³ Show Material materials with Density of 2.67 g/cm³ at 23.0 °C | 23.0 °C | |
Mechanical
Property | Value | Temperature | Comment |
---|---|---|---|
Elastic modulus | 70 GPa Show Material materials with Elastic modulus of 70 GPa at 20.0 °C | 20.0 °C | |
70.5 GPa Show Material materials with Elastic modulus of 70.5 GPa at 23.0 °C | 23.0 °C | ||
Elongation | 16 % Show Material materials with Elongation of 16 % at 20.0 °C | 20.0 °C | |
Elongation A100 | 16 % Show Material materials with Elongation A100 of 16 % at 23.0 °C | 23.0 °C | |
Elongation A50 | 14 % Show Material materials with Elongation A50 of 14 % at 20.0 °C | 20.0 °C | |
14 % Show Material materials with Elongation A50 of 14 % at 23.0 °C | 23.0 °C | ||
Hardness, Brinell | 55 [-] Show Material materials with Hardness, Brinell of 55 [-] at 20.0 °C | 20.0 °C | |
Plane-Strain Fracture Toughnes | 22 - 35 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23.0 °C | 23.0 °C | Typical for Wrought 5000 Series Aluminium |
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] at 20.0 °C | 20.0 °C | |
Shear modulus | 26.6 GPa Show Material materials with Shear modulus of 26.6 GPa at 20.0 °C | 20.0 °C | |
26.6 GPa Show Material materials with Shear modulus of 26.6 GPa at 23.0 °C | 23.0 °C | ||
Tensile strength | 200 - 215 MPa Show Material materials with Tensile strength of 200 - 215 MPa at 20.0 °C | 20.0 °C | |
200 - 385 MPa Show Material materials with Tensile strength of 200 - 385 MPa at 23.0 °C | 23.0 °C | ||
Tensile strength, transverse | 215 MPa Show Material materials with Tensile strength, transverse of 215 MPa at 20.0 °C | 20.0 °C | |
Yield strength Rp0.2 | 85 MPa Show Material materials with Yield strength Rp0.2 of 85 MPa at 20.0 °C | 20.0 °C | |
85 MPa Show Material materials with Yield strength Rp0.2 of 85 MPa at 23.0 °C | 23.0 °C | ||
Thermal
Property | Value | Temperature | Comment |
---|---|---|---|
Coefficient of thermal expansion | 2.2E-5 - 2.5E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.2E-5 - 2.5E-5 1/K at 23.0 °C | 23.0 °C | Typical for Wrought 5000 Series Aluminium |
Max service temperature | 150 °C Show Material materials with Max service temperature of 150 °C | Typical for Wrought 5000 Series Aluminium | |
Melting point | 560 - 655 °C Show Material materials with Melting point of 560 - 655 °C | Typical for Wrought 5000 Series Aluminium | |
Specific heat capacity | 897 J/(kg·K) Show Material materials with Specific heat capacity of 897 J/(kg·K) at 20.0 °C | 20.0 °C | |
Thermal conductivity | 129 W/(m·K) Show Material materials with Thermal conductivity of 129 W/(m·K) at 20.0 °C | 20.0 °C |
Electrical
Property | Value | Temperature | Comment |
---|---|---|---|
Electrical conductivity | 1.80E+7 - 3.10E+7 S/m Show Material materials with Electrical conductivity of 1.80E+7 - 3.10E+7 S/m at 23.0 °C | 23.0 °C | Typical for Wrought 5000 Series Aluminium |
Electrical resistivity | 5.4E-8 Ω·m Show Material materials with Electrical resistivity of 5.4E-8 Ω·m at 20.0 °C | 20.0 °C |
Chemical properties
Property | ||
---|---|---|
Chromium | 0.25 % | |
Copper | 0.1 % | |
Iron | 0.5 % | |
Magnesium | 3.1 - 3.9 % | |
Manganese | 0.5 % | |
Other | Mn + Cr = 0.1 - 0.5, Be < 0.0003 for welding additives, each 0.05, total 0.15, Rest Al | |
Silicon | 0.5 % | |
Titanium | 0.2 % | |
Zinc | 0.2 % |
Technological properties
Property | ||
---|---|---|
Anodizing | decorative: acceptable, Protective: very good | |
Brazing | hard brazing (with flux/ without flux): sufficient - not suitable / sufficient, friction soldering: acceptable, soft brazing with flux: poor | |
Corrosion properties | Seawater: very good to good, weathering: very good | |
Workability | Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): sufficient, Deep drawing / upsetting (Condition) good (O) / good (O) |