EN 573-3 Grade AW-5182 H111

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMg alloy. The alloy is food safe.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey,Aludium.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

20.0 °C

2.64 g/cm³

Show Material materials with Density of 2.64 g/cm³

H111

EN 573-3

Flat

2.65 g/cm³

Show Material materials with Density of 2.65 g/cm³

H111

EN 573-3, EN 14286, EN 485

Strip, Sheet, Plate

2.65 g/cm³

Show Material materials with Density of 2.65 g/cm³

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

valueMetaData

PropertyValue

Thickness

0.2 - 3 mm

Show Material materials with Thickness of 0.2 - 3 mm

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Bending angle 180°

1.0 °/t

Show Material materials with Bending angle 180° of 1.0 °/t

H111

EN 573-3, EN 14286, EN 485

Strip, Sheet, Plate

2.0 °/t

Show Material materials with Bending angle 180° of 2.0 °/t

H111

EN 573-3, EN 14286

Strip, Sheet, Plate

1 °/t

Show Material materials with Bending angle 180° of 1 °/t

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Unlock all property charts

Elastic modulus

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

H111

EN 573-3, EN 14286, EN 485

Strip, Sheet, Plate

71.0 GPa

Show Material materials with Elastic modulus of 71.0 GPa

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Unlock all property charts

Elongation A100

23.0 °C

26 %

Show Material materials with Elongation A100 of 26 %

Elongation A50

20.0 °C

11 - 13 %

Show Material materials with Elongation A50 of 11 - 13 %

23.0 °C

11 - 13 %

Show Material materials with Elongation A50 of 11 - 13 %

Unlock all property charts

Elongation A50, transverse

20.0 °C

11 - 13 %

Show Material materials with Elongation A50, transverse of 11 - 13 %

Hardness, Brinell

20.0 °C

69.0 [-]

Show Material materials with Hardness, Brinell of 69.0 [-]

H111

EN 573-3

Flat

69.0 [-]

Show Material materials with Hardness, Brinell of 69.0 [-]

H111

EN 573-3, EN 485

Strip, Sheet, Plate

Unlock all property charts

Hardness, HBW

69 [-]

Show Material materials with Hardness, HBW of 69 [-]

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Unlock all property charts

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 5000 Series Aluminium

Unlock all property charts

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 5000 Series Aluminium

Unlock all property charts

Shear modulus

20.0 °C

27.0 GPa

Show Material materials with Shear modulus of 27.0 GPa

H111

EN 573-3, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Flat, Coil, Sheet

Unlock all property charts

Tensile strength

20.0 °C

255.0 - 315.0 MPa

Show Material materials with Tensile strength of 255.0 - 315.0 MPa

H111

EN 573-3

Flat

Transverse

280.0 - 350.0 MPa

Show Material materials with Tensile strength of 280.0 - 350.0 MPa

H111

EN 573-3, EN 14286

Strip, Sheet, Plate

20.0 °C

255.0 - 315.0 MPa

Show Material materials with Tensile strength of 255.0 - 315.0 MPa

H111

EN 573-3, EN 485, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Strip, Sheet, Plate, Coil, Sheet, Flat

Unlock all property charts

Tensile strength, transverse

20.0 °C

255 - 315 MPa

Show Material materials with Tensile strength, transverse of 255 - 315 MPa

Yield strength

20.0 °C

110.0 MPa

Show Material materials with Yield strength of 110.0 MPa

H111

EN 573-3

Flat

RP002 Transverse

125.0 MPa

Show Material materials with Yield strength of 125.0 MPa

H111

EN 573-3, EN 14286

Strip, Sheet, Plate

RP02

110.0 MPa

Show Material materials with Yield strength of 110.0 MPa

H111

EN 573-3, EN 485

Strip, Sheet, Plate

RP02

20.0 °C

110.0 MPa

Show Material materials with Yield strength of 110.0 MPa

H111

EN 573-3

Flat

RP02

110 MPa

Show Material materials with Yield strength of 110 MPa

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Unlock all property charts

Yield strength Rp0.2

20.0 °C

110 MPa

Show Material materials with Yield strength Rp0.2 of 110 MPa

23.0 °C

110 - 125 MPa

Show Material materials with Yield strength Rp0.2 of 110 - 125 MPa

Unlock all property charts

Yield strength Rp0.2, transverse

20.0 °C

110 MPa

Show Material materials with Yield strength Rp0.2, transverse of 110 MPa

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

100 °C

0.000024 1/K

Show Material materials with Coefficient of thermal expansion of 0.000024 1/K

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

20-100°C

100 °C, 20 °C

2.3199999999999998e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K

H111

EN 573-3, EN 14286, EN 485

Strip, Sheet, Plate

Unlock all property charts

Max service temperature

150.0 °C

Show Material materials with Max service temperature of 150.0 °C

Typical for Wrought 5000 Series Aluminium

Melting point

577.0 - 638.0 °C

Show Material materials with Melting point of 577.0 - 638.0 °C

H111

EN 573-3, EN 14286, EN 485

Strip, Sheet, Plate

Specific heat capacity

20.0 °C

900.0 J/(kg·K)

Show Material materials with Specific heat capacity of 900.0 J/(kg·K)

H111

EN 573-3

Flat

Unlock all property charts

Thermal conductivity

20.0 °C

140.0 W/(m·K)

Show Material materials with Thermal conductivity of 140.0 W/(m·K)

H111

EN 573-3

Flat

123 W/(m·K)

Show Material materials with Thermal conductivity of 123 W/(m·K)

H111

EN 573-3, EN 14286, EN 485

Strip, Sheet, Plate

121 W/(m·K)

Show Material materials with Thermal conductivity of 121 W/(m·K)

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Unlock all property charts

Electrical

PropertyTemperatureValueConditionRelated StandardsShape

Electrical conductivity

20.0 °C

19000000.0 S/m

Show Material materials with Electrical conductivity of 19000000.0 S/m

H111

EN 573-3

Flat

18000000.0 S/m

Show Material materials with Electrical conductivity of 18000000.0 S/m

H111

EN 573-3, EN 14286, EN 485

Strip, Sheet, Plate

Unlock all property charts

Electrical resistivity

5.56e-08 Ω·m

Show Material materials with Electrical resistivity of 5.56e-08 Ω·m

H111

EN 573-3, EN 14286, EN 485

Strip, Sheet, Plate

5.6e-08 Ω·m

Show Material materials with Electrical resistivity of 5.6e-08 Ω·m

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Unlock all property charts

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.1 %

Show Material materials with Chromium of 0.1 %

H111

EN 573-3, EN 14286, EN 485

Flat, Strip, Sheet, Plate

0.1 %

Show Material materials with Chromium of 0.1 %

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Copper

0.15 %

Show Material materials with Copper of 0.15 %

H111

EN 573-3, EN 14286, EN 485

Flat, Strip, Sheet, Plate

0.15 %

Show Material materials with Copper of 0.15 %

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Iron

0.35 %

Show Material materials with Iron of 0.35 %

H111

EN 573-3

Flat

0.35 %

Show Material materials with Iron of 0.35 %

H111

EN 573-3, EN 14286, EN 485, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Strip, Sheet, Plate, Coil, Sheet

Magnesium

4.0 - 5.0 %

Show Material materials with Magnesium of 4.0 - 5.0 %

H111

EN 573-3, EN 14286, EN 485, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Flat, Strip, Sheet, Plate, Coil, Sheet

Manganese

0.2 - 0.5 %

Show Material materials with Manganese of 0.2 - 0.5 %

H111

EN 573-3, EN 14286, EN 485, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Flat, Strip, Sheet, Plate, Coil, Sheet

Other

0.05 - 0.15 %

Show Material materials with Other of 0.05 - 0.15 %

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Silicon

0.2 %

Show Material materials with Silicon of 0.2 %

H111

EN 573-3, EN 14286, EN 485

Flat, Strip, Sheet, Plate

0.2 %

Show Material materials with Silicon of 0.2 %

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Titanium

0.1 %

Show Material materials with Titanium of 0.1 %

H111

EN 573-3, EN 14286, EN 485

Flat, Strip, Sheet, Plate

0.1 %

Show Material materials with Titanium of 0.1 %

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Zinc

0.25 %

Show Material materials with Zinc of 0.25 %

H111

EN 573-3, EN 14286, EN 485

Flat, Strip, Sheet, Plate

0.25 %

Show Material materials with Zinc of 0.25 %

H111

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 541

Coil, Sheet

Technological properties

Property
Anodizing

decorative: sufficient, Protective: good

Application areas

Wind energy: Nacelle coverings, rotor hub, stairs; Components: Heat shields, Access hatches, Spoilers, General tranportation

Brazing

hard brazing (with flux/ without flux): sufficient to not suitable / poor, friction soldering: acceptable, soft brazing with flux: poor

Corrosion properties

Seawater: very good, weathering: very good

Welding

Good

Workability

Bending / Spinning (cold): good / sufficient, Impact extrusion (cold): sufficient, Deep drawing / upsetting (Condition) good (O) / acceptable (O)