EN 573-3 Grade AW-5182 H19

Want to keep this datasheet? Save it now in your required format

Description

The food-safe material EN AW-Al Mg4,5Mn0,4 is produced for sheet metal,as prematerial for cans, caps and stoppers. To the comparable mark AlMg5Mn, material No. 3.3549, acc. to DIN 1725-1 :1983-02 applies: The alloy AlMg5Mn is a naturally hard aluminium material. A strength increase is achieved only by cold forming not by controlled heat treatment. It has a high corrosion resistance. It is resistant to seawater and salted atmosphere. Increasing Mg- and Mn-content complicate extrusion but strength and low-temperature behaviour enhances. The material is ideal for welding. Application: shutters and roll-up gates (sheet metal sections), in apparatus engineering for reservoir bottoms, low-temperature tanks, heat exchanger, air decomposer and pipelines. In vehicle manufacturing for superstructures as well as for bulk and tank vehicles, motor busses, shock absorber, body and safety parts. In shipbuilding for hull, superstructure, radar system.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,Aludium,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

2.64 g/cm³

Show Material materials with Density of 2.64 g/cm³

23.0 °C

2.65 g/cm³

Show Material materials with Density of 2.65 g/cm³

Dimension

PropertyValue

Thickness

0.2 - 1.5 mm

Show Material materials with Thickness of 0.2 - 1.5 mm

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

70 - 71 GPa

Show Material materials with Elastic modulus of 70 - 71 GPa

Elongation A50

20.0 °C

1 - 5 %

Show Material materials with Elongation A50 of 1 - 5 %

23.0 °C

1 - 4 %

Show Material materials with Elongation A50 of 1 - 4 %

Unlock all property charts

Elongation A50, transverse

20.0 °C

1 %

Show Material materials with Elongation A50, transverse of 1 %

Hardness, Brinell

20.0 °C

114 [-]

Show Material materials with Hardness, Brinell of 114 [-]

23.0 °C

114 [-]

Show Material materials with Hardness, Brinell of 114 [-]

Unlock all property charts

Hardness, HBW

23.0 °C

114 [-]

Show Material materials with Hardness, HBW of 114 [-]

Plane-Strain Fracture Toughnes

23.0 °C

22 - 35 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

23.0 °C

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 5000 Series Aluminium

Shear modulus

20.0 °C

27 GPa

Show Material materials with Shear modulus of 27 GPa

23.0 °C

27 GPa

Show Material materials with Shear modulus of 27 GPa

Unlock all property charts

Tensile strength

20.0 °C

350 - 430 MPa

Show Material materials with Tensile strength of 350 - 430 MPa

23.0 °C

370 - 430 MPa

Show Material materials with Tensile strength of 370 - 430 MPa

Unlock all property charts

Tensile strength, transverse

20.0 °C

380 MPa

Show Material materials with Tensile strength, transverse of 380 MPa

Yield strength

23.0 °C

320 MPa

Show Material materials with Yield strength of 320 MPa

Yield strength Rp0.2

20.0 °C

310 - 390 MPa

Show Material materials with Yield strength Rp0.2 of 310 - 390 MPa

23.0 °C

320 - 390 MPa

Show Material materials with Yield strength Rp0.2 of 320 - 390 MPa

Unlock all property charts

Yield strength Rp0.2, transverse

20.0 °C

320 MPa

Show Material materials with Yield strength Rp0.2, transverse of 320 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

20.0 °C

2.32E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.32E-5 1/K

20-100°C

100.0 °C

2.32E-5 - 2.4E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.32E-5 - 2.4E-5 1/K

20-100°C

Unlock all property charts

Max service temperature

150 °C

Show Material materials with Max service temperature of 150 °C

Typical for Wrought 5000 Series Aluminium

Melting point

577 - 638 °C

Show Material materials with Melting point of 577 - 638 °C

Specific heat capacity

20.0 °C

900 J/(kg·K)

Show Material materials with Specific heat capacity of 900 J/(kg·K)

Thermal conductivity

20.0 °C

140 W/(m·K)

Show Material materials with Thermal conductivity of 140 W/(m·K)

23.0 °C

121 - 123 W/(m·K)

Show Material materials with Thermal conductivity of 121 - 123 W/(m·K)

Unlock all property charts

Electrical

PropertyTemperatureValue

Electrical conductivity

20.0 °C

1.90E+7 S/m

Show Material materials with Electrical conductivity of 1.90E+7 S/m

23.0 °C

1.80E+7 S/m

Show Material materials with Electrical conductivity of 1.80E+7 S/m

Unlock all property charts

Electrical resistivity

23.0 °C

5.56E-8 - 5.6E-8 Ω·m

Show Material materials with Electrical resistivity of 5.56E-8 - 5.6E-8 Ω·m

Chemical properties

PropertyValueComment

Chromium

0.1 %

Show Material materials with Chromium of 0.1 %

Copper

0.15 %

Show Material materials with Copper of 0.15 %

Iron

0.35 %

Show Material materials with Iron of 0.35 %

Magnesium

4 - 5 %

Show Material materials with Magnesium of 4 - 5 %

Manganese

0.2 - 0.5 %

Show Material materials with Manganese of 0.2 - 0.5 %

Other

0.05 - 0.15 %

Show Material materials with Other of 0.05 - 0.15 %

each 0.05, total 0.15, Rest Al

Silicon

0.2 %

Show Material materials with Silicon of 0.2 %

Titanium

0.1 %

Show Material materials with Titanium of 0.1 %

Zinc

0.25 %

Show Material materials with Zinc of 0.25 %

Technological properties

Property
Anodizing

Excellent

Application areas

Wind energy: Nacelle coverings, rotor hub, stairs; Components: Heat shields, Access hatches, Spoilers, General tranportation

Brazing

Brazing is not recommended.

Corrosion properties

Excellent

Welding

Good

Workability

Very good in special (Lüder lines resistant) O temper.