EN 573-3 Grade AW-1200 H112

Want to keep this datasheet? Save it now in your required format

Description

Material EN AW-Al 99,0 is produced in large quantities for sheets, strips, plates, scraps, foils, for presswork components, rolled and pressed bars, for prematerial for heat exchanger. It is used in limited quantities for wire and prewire for mechanical application. It is food-safe. The material is comparable to trademark Al 99, material number 3.0205, acc. to DIN 1712-3 : 1976-12. It is well anodizable and shows favorable electrical and thermal conductivity. Smearing may occur on machining. Low mechanical strength, high strain. Formability as well as chemical and weathering resistance are excellent. This material is well suitable for welding and hard soldering. Application: apparatus engineering, roll bond, Z-bond, household appliances, storage and transport equipment for chemical, pharmaceutical and food industry, roofings, facings, arts-and-crafts, packagings, extruded parts, e.g. collapsible tubes, tubes, cans, bottles as well as for hardware and motor vehicle registration plates.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Temperature
Density	2.71 - 2.72 g/cm³ Show Material materials with Density of 2.71 - 2.72 g/cm³ at 20.0 °C	20.0 °C
	2.71 g/cm³ Show Material materials with Density of 2.71 g/cm³ at 23.0 °C	23.0 °C

Mechanical

Property	Value	Temperature	Comment
Elastic modulus	60 - 69 GPa Show Material materials with Elastic modulus of 60 - 69 GPa at 20.0 °C	20.0 °C
	69 GPa Show Material materials with Elastic modulus of 69 GPa at 23.0 °C	23.0 °C
	Unlock all property charts
Elongation	16 - 20 % Show Material materials with Elongation of 16 - 20 % at 20.0 °C	20.0 °C
Elongation A100	16 - 20 % Show Material materials with Elongation A100 of 16 - 20 % at 23.0 °C	23.0 °C
Elongation A50	16 - 18 % Show Material materials with Elongation A50 of 16 - 18 % at 20.0 °C	20.0 °C
	16 - 18 % Show Material materials with Elongation A50 of 16 - 18 % at 23.0 °C	23.0 °C
	Unlock all property charts
Elongation A50, transverse	16 % Show Material materials with Elongation A50, transverse of 16 % at 20.0 °C	20.0 °C
Elongation, transverse	16 % Show Material materials with Elongation, transverse of 16 % at 20.0 °C	20.0 °C
Hardness, Brinell	23 - 26 [-] Show Material materials with Hardness, Brinell of 23 - 26 [-] at 20.0 °C	20.0 °C
	24 - 26 [-] Show Material materials with Hardness, Brinell of 24 - 26 [-] at 23.0 °C	23.0 °C
	Unlock all property charts
Plane-Strain Fracture Toughnes	22 - 35 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23.0 °C	23.0 °C	Typical for Wrought 1000 Series Aluminium
Poisson's ratio	0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] at 20.0 °C	20.0 °C
Shear modulus	24 - 26 GPa Show Material materials with Shear modulus of 24 - 26 GPa at 20.0 °C	20.0 °C
	25.9 GPa Show Material materials with Shear modulus of 25.9 GPa at 23.0 °C	23.0 °C
	Unlock all property charts
Tensile strength	75 - 85 MPa Show Material materials with Tensile strength of 75 - 85 MPa at 20.0 °C	20.0 °C
	75 - 85 MPa Show Material materials with Tensile strength of 75 - 85 MPa at 23.0 °C	23.0 °C
	Unlock all property charts
Tensile strength, transverse	80 - 85 MPa Show Material materials with Tensile strength, transverse of 80 - 85 MPa at 20.0 °C	20.0 °C
Yield strength Rp0.2	25 - 35 MPa Show Material materials with Yield strength Rp0.2 of 25 - 35 MPa at 20.0 °C	20.0 °C
	25 - 35 MPa Show Material materials with Yield strength Rp0.2 of 25 - 35 MPa at 23.0 °C	23.0 °C
	Unlock all property charts
Yield strength Rp0.2, transverse	30 - 35 MPa Show Material materials with Yield strength Rp0.2, transverse of 30 - 35 MPa at 20.0 °C	20.0 °C

Thermal

Property	Value	Temperature
Coefficient of thermal expansion	2.17E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.17E-5 1/K at -50.0 °C	-50.0 °C
	2.17E-5 - 2.54E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.17E-5 - 2.54E-5 1/K at 20.0 °C	20.0 °C
	2.35E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.35E-5 1/K at 100.0 °C	100.0 °C
	2.44E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.44E-5 1/K at 200.0 °C	200.0 °C
	2.54E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.54E-5 1/K at 300.0 °C	300.0 °C
	Unlock all property charts
Melting point	644 - 657 °C Show Material materials with Melting point of 644 - 657 °C
Specific heat capacity	898 J/(kg·K) Show Material materials with Specific heat capacity of 898 J/(kg·K) at 20.0 °C	20.0 °C
Thermal conductivity	205 - 225 W/(m·K) Show Material materials with Thermal conductivity of 205 - 225 W/(m·K) at 20.0 °C	20.0 °C
	205 - 210 W/(m·K) Show Material materials with Thermal conductivity of 205 - 210 W/(m·K) at 23.0 °C	23.0 °C
	Unlock all property charts

Electrical

Property	Value	Temperature
Electrical conductivity	3.44E+7 - 3.55E+7 S/m Show Material materials with Electrical conductivity of 3.44E+7 - 3.55E+7 S/m at 20.0 °C	20.0 °C
	3.30E+7 - 3.40E+7 S/m Show Material materials with Electrical conductivity of 3.30E+7 - 3.40E+7 S/m at 23.0 °C	23.0 °C
	Unlock all property charts
Electrical resistivity	2.95E-8 Ω·m Show Material materials with Electrical resistivity of 2.95E-8 Ω·m at 20.0 °C	20.0 °C
	2.94E-8 - 3.03E-8 Ω·m Show Material materials with Electrical resistivity of 2.94E-8 - 3.03E-8 Ω·m at 23.0 °C	23.0 °C
	Unlock all property charts

Chemical properties

Property
Aluminium	99 %
Copper	0.05 %
Manganese	0.05 %
Other		Si + Fe < 1.00, each 0.05, total 0.15
Titanium	0.05 %
Zinc	0.1 %

Technological properties

Property
Anodizing	decorative: acceptable, Protective: very good
Brazing	hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good
Corrosion properties	Seawater: sufficient, weathering: acceptable
Workability	Bending / Spinning (cold): very good / very good, Impact extrusion (cold): very good, Deep drawing / upsetting (Condition) very good (H12) / very good (H12)