EN 573-3 Grade AW-1200 H19

Want to keep this datasheet? Save it now in your required format

Description

Material EN AW-Al 99,0 is produced in large quantities for sheets, strips, plates, scraps, foils, for presswork components, rolled and pressed bars, for prematerial for heat exchanger. It is used in limited quantities for wire and prewire for mechanical application. It is food-safe. The material is comparable to trademark Al 99, material number 3.0205, acc. to DIN 1712-3 : 1976-12. It is well anodizable and shows favorable electrical and thermal conductivity. Smearing may occur on machining. Low mechanical strength, high strain. Formability as well as chemical and weathering resistance are excellent. This material is well suitable for welding and hard soldering. Application: apparatus engineering, roll bond, Z-bond, household appliances, storage and transport equipment for chemical, pharmaceutical and food industry, roofings, facings, arts-and-crafts, packagings, extruded parts, e.g. collapsible tubes, tubes, cans, bottles as well as for hardware and motor vehicle registration plates.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey,Aludium.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Temperature
Density	2.71 - 2.72 g/cm³ Show Material materials with Density of 2.71 - 2.72 g/cm³ at 20.0 °C	20.0 °C
	2.69 - 2.71 g/cm³ Show Material materials with Density of 2.69 - 2.71 g/cm³ at 23.0 °C	23.0 °C

Dimension

Property	Value
Thickness	0.2 - 400 mm Show Material materials with Thickness of 0.2 - 400 mm

Mechanical

Property	Value	Temperature	Comment
Elastic modulus	60 - 69 GPa Show Material materials with Elastic modulus of 60 - 69 GPa at 20.0 °C	20.0 °C
	69 - 70 GPa Show Material materials with Elastic modulus of 69 - 70 GPa at 23.0 °C	23.0 °C
	Unlock all property charts
Elongation A100	1 % Show Material materials with Elongation A100 of 1 % at 20.0 °C	20.0 °C
Elongation A50	1 % Show Material materials with Elongation A50 of 1 % at 20.0 °C	20.0 °C
	1 % Show Material materials with Elongation A50 of 1 % at 23.0 °C	23.0 °C
	Unlock all property charts
Elongation A50, transverse	1 % Show Material materials with Elongation A50, transverse of 1 % at 20.0 °C	20.0 °C
Hardness, Brinell	48 [-] Show Material materials with Hardness, Brinell of 48 [-] at 20.0 °C	20.0 °C
	48 [-] Show Material materials with Hardness, Brinell of 48 [-] at 23.0 °C	23.0 °C
	Unlock all property charts
Hardness, HBW	48 [-] Show Material materials with Hardness, HBW of 48 [-] at 23.0 °C	23.0 °C
Plane-Strain Fracture Toughnes	22 - 35 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23.0 °C	23.0 °C	Typical for Wrought 1000 Series Aluminium
Poisson's ratio	0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] at 20.0 °C	20.0 °C
Shear modulus	24 - 26 GPa Show Material materials with Shear modulus of 24 - 26 GPa at 20.0 °C	20.0 °C
	25.9 - 26.5 GPa Show Material materials with Shear modulus of 25.9 - 26.5 GPa at 23.0 °C	23.0 °C
	Unlock all property charts
Tensile strength	160 - 180 MPa Show Material materials with Tensile strength of 160 - 180 MPa at 20.0 °C	20.0 °C
	155 - 170 MPa Show Material materials with Tensile strength of 155 - 170 MPa at 23.0 °C	23.0 °C
	Unlock all property charts
Tensile strength, transverse	160 MPa Show Material materials with Tensile strength, transverse of 160 MPa at 20.0 °C	20.0 °C
Yield strength	95 - 150 MPa Show Material materials with Yield strength of 95 - 150 MPa at 23.0 °C	23.0 °C
Yield strength Rp0.2	140 - 160 MPa Show Material materials with Yield strength Rp0.2 of 140 - 160 MPa at 20.0 °C	20.0 °C
	140 - 150 MPa Show Material materials with Yield strength Rp0.2 of 140 - 150 MPa at 23.0 °C	23.0 °C
	Unlock all property charts
Yield strength Rp0.2, transverse	140 MPa Show Material materials with Yield strength Rp0.2, transverse of 140 MPa at 20.0 °C	20.0 °C

Thermal

Property	Value	Temperature	Comment
Coefficient of thermal expansion	2.17E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.17E-5 1/K at -50.0 °C	-50.0 °C	20-100°C
	2.17E-5 - 2.54E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.17E-5 - 2.54E-5 1/K at 20.0 °C	20.0 °C	20-100°C
	2.35E-5 - 2.4E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.35E-5 - 2.4E-5 1/K at 100.0 °C	100.0 °C	20-100°C
	2.44E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.44E-5 1/K at 200.0 °C	200.0 °C	20-100°C
	2.54E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.54E-5 1/K at 300.0 °C	300.0 °C	20-100°C
	Unlock all property charts
Melting point	644 - 657 °C Show Material materials with Melting point of 644 - 657 °C
Specific heat capacity	898 J/(kg·K) Show Material materials with Specific heat capacity of 898 J/(kg·K) at 20.0 °C	20.0 °C
Thermal conductivity	205 - 225 W/(m·K) Show Material materials with Thermal conductivity of 205 - 225 W/(m·K) at 20.0 °C	20.0 °C
	138 - 210 W/(m·K) Show Material materials with Thermal conductivity of 138 - 210 W/(m·K) at 23.0 °C	23.0 °C
	Unlock all property charts

Electrical

Property	Value	Temperature
Electrical conductivity	3.44E+7 - 3.55E+7 S/m Show Material materials with Electrical conductivity of 3.44E+7 - 3.55E+7 S/m at 20.0 °C	20.0 °C
	3.30E+7 - 3.40E+7 S/m Show Material materials with Electrical conductivity of 3.30E+7 - 3.40E+7 S/m at 23.0 °C	23.0 °C
	Unlock all property charts
Electrical resistivity	2.95E-8 Ω·m Show Material materials with Electrical resistivity of 2.95E-8 Ω·m at 20.0 °C	20.0 °C
	2.94E-8 - 4.9E-8 Ω·m Show Material materials with Electrical resistivity of 2.94E-8 - 4.9E-8 Ω·m at 23.0 °C	23.0 °C
	Unlock all property charts

Chemical properties

Property
Aluminium	99 %
Copper	0.05 %
Iron	1 %	Si + Fe
Manganese	0.05 %
Other	0.15 %	Si + Fe < 1.00, each 0.05, total 0.15
Silicon	1 %	Si + Fe
Titanium	0.05 %
Zinc	0.1 %

Technological properties

Property
Anodizing	decorative: acceptable, Protective: very good
Application areas	Facades: Single sheet, Sheets for composites/ sandwich Panels; Roofing: Foil for bituminous coating; Doors: Sheets for composites/ sandwich Panels; Electronic devices: Housing of devices; Heat exchangers: Fins; Cable wrapping: Electric cable wrapping; Insulation; Solar: Solar collectors; Semi-rigid and corrugated: Smooth wall
Brazing	hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good
Corrosion properties	Seawater: sufficient, weathering: acceptable
Welding	Excellent
Workability	Bending / Spinning (cold): very good / very good, Impact extrusion (cold): very good, Deep drawing / upsetting (Condition) very good (H12) / very good (H12)