EN 573-3 Grade AW-1200 H22

Want to keep this datasheet? Save it now in your required format

Description

Material EN AW-Al 99,0 is produced in large quantities for sheets, strips, plates, scraps, foils, for presswork components, rolled and pressed bars, for prematerial for heat exchanger. It is used in limited quantities for wire and prewire for mechanical application. It is food-safe. The material is comparable to trademark Al 99, material number 3.0205, acc. to DIN 1712-3 : 1976-12. It is well anodizable and shows favorable electrical and thermal conductivity. Smearing may occur on machining. Low mechanical strength, high strain. Formability as well as chemical and weathering resistance are excellent. This material is well suitable for welding and hard soldering. Application: apparatus engineering, roll bond, Z-bond, household appliances, storage and transport equipment for chemical, pharmaceutical and food industry, roofings, facings, arts-and-crafts, packagings, extruded parts, e.g. collapsible tubes, tubes, cans, bottles as well as for hardware and motor vehicle registration plates.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,Aludium,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Temperature
Density	2.71 - 2.72 g/cm³ Show Material materials with Density of 2.71 - 2.72 g/cm³ at 20.0 °C	20.0 °C
	2.69 - 2.71 g/cm³ Show Material materials with Density of 2.69 - 2.71 g/cm³ at 23.0 °C	23.0 °C

Dimension

Property	Value
Thickness	0.2 - 400 mm Show Material materials with Thickness of 0.2 - 400 mm

Mechanical

Property	Value	Temperature	Comment
Bending angle 180°	0.5 - 1 °/t Show Material materials with Bending angle 180° of 0.5 - 1 °/t at 23.0 °C	23.0 °C
Bending angle 90°	0 - 2 °/t Show Material materials with Bending angle 90° of 0 - 2 °/t at 23.0 °C	23.0 °C
Elastic modulus	60 - 69 GPa Show Material materials with Elastic modulus of 60 - 69 GPa at 20.0 °C	20.0 °C
	69 - 70 GPa Show Material materials with Elastic modulus of 69 - 70 GPa at 23.0 °C	23.0 °C
	Unlock all property charts
Elongation A100	2 - 8 % Show Material materials with Elongation A100 of 2 - 8 % at 20.0 °C	20.0 °C
Elongation A50	2 - 10 % Show Material materials with Elongation A50 of 2 - 10 % at 20.0 °C	20.0 °C
	1 - 10 % Show Material materials with Elongation A50 of 1 - 10 % at 23.0 °C	23.0 °C
	Unlock all property charts
Elongation A50, transverse	4 - 10 % Show Material materials with Elongation A50, transverse of 4 - 10 % at 20.0 °C	20.0 °C
Hardness, Brinell	30 [-] Show Material materials with Hardness, Brinell of 30 [-] at 20.0 °C	20.0 °C
	30 [-] Show Material materials with Hardness, Brinell of 30 [-] at 23.0 °C	23.0 °C
	Unlock all property charts
Hardness, HBW	30 - 41 [-] Show Material materials with Hardness, HBW of 30 - 41 [-] at 23.0 °C	23.0 °C
Plane-Strain Fracture Toughnes	22 - 35 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23.0 °C	23.0 °C	Typical for Wrought 1000 Series Aluminium
Poisson's ratio	0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] at 20.0 °C	20.0 °C
Shear modulus	24 - 26 GPa Show Material materials with Shear modulus of 24 - 26 GPa at 20.0 °C	20.0 °C
	25.9 - 26.5 GPa Show Material materials with Shear modulus of 25.9 - 26.5 GPa at 23.0 °C	23.0 °C
	Unlock all property charts
Tensile strength	90 - 135 MPa Show Material materials with Tensile strength of 90 - 135 MPa at 20.0 °C	20.0 °C
	90 - 170 MPa Show Material materials with Tensile strength of 90 - 170 MPa at 23.0 °C	23.0 °C
	Unlock all property charts
Tensile strength, transverse	95 - 135 MPa Show Material materials with Tensile strength, transverse of 95 - 135 MPa at 20.0 °C	20.0 °C
Yield strength	60 - 105 MPa Show Material materials with Yield strength of 60 - 105 MPa at 23.0 °C	23.0 °C
Yield strength Rp0.2	60 - 65 MPa Show Material materials with Yield strength Rp0.2 of 60 - 65 MPa at 20.0 °C	20.0 °C
	60 - 65 MPa Show Material materials with Yield strength Rp0.2 of 60 - 65 MPa at 23.0 °C	23.0 °C
	Unlock all property charts
Yield strength Rp0.2, transverse	65 MPa Show Material materials with Yield strength Rp0.2, transverse of 65 MPa at 20.0 °C	20.0 °C

Thermal

Property	Value	Temperature	Comment
Coefficient of thermal expansion	2.17E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.17E-5 1/K at -50.0 °C	-50.0 °C	20-100°C
	2.17E-5 - 2.54E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.17E-5 - 2.54E-5 1/K at 20.0 °C	20.0 °C	20-100°C
	2.35E-5 - 2.4E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.35E-5 - 2.4E-5 1/K at 100.0 °C	100.0 °C	20-100°C
	2.44E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.44E-5 1/K at 200.0 °C	200.0 °C	20-100°C
	2.54E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.54E-5 1/K at 300.0 °C	300.0 °C	20-100°C
	Unlock all property charts
Melting point	644 - 657 °C Show Material materials with Melting point of 644 - 657 °C
Specific heat capacity	898 J/(kg·K) Show Material materials with Specific heat capacity of 898 J/(kg·K) at 20.0 °C	20.0 °C
Thermal conductivity	205 - 225 W/(m·K) Show Material materials with Thermal conductivity of 205 - 225 W/(m·K) at 20.0 °C	20.0 °C
	138 - 210 W/(m·K) Show Material materials with Thermal conductivity of 138 - 210 W/(m·K) at 23.0 °C	23.0 °C
	Unlock all property charts

Electrical

Property	Value	Temperature
Electrical conductivity	3.44E+7 - 3.55E+7 S/m Show Material materials with Electrical conductivity of 3.44E+7 - 3.55E+7 S/m at 20.0 °C	20.0 °C
	3.30E+7 - 3.40E+7 S/m Show Material materials with Electrical conductivity of 3.30E+7 - 3.40E+7 S/m at 23.0 °C	23.0 °C
	Unlock all property charts
Electrical resistivity	2.95E-8 Ω·m Show Material materials with Electrical resistivity of 2.95E-8 Ω·m at 20.0 °C	20.0 °C
	2.94E-8 - 4.9E-8 Ω·m Show Material materials with Electrical resistivity of 2.94E-8 - 4.9E-8 Ω·m at 23.0 °C	23.0 °C
	Unlock all property charts

Chemical properties

Property
Aluminium	99 %
Copper	0.05 %
Iron	1 %	Si + Fe
Manganese	0.05 %
Other	0.15 %	Si + Fe < 1.00, each 0.05, total 0.15
Silicon	1 %	Si + Fe
Titanium	0.05 %
Zinc	0.1 %

Technological properties

Property
Anodizing	Very Good
Application areas	Facades: Single sheet, Sheets for composites/ sandwich Panels; Roofing: Foil for bituminous coating; Doors: Sheets for composites/ sandwich Panels; Electronic devices: Housing of devices; Heat exchangers: Fins; Cable wrapping: Electric cable wrapping; Insulation; Solar: Solar collectors; Semi-rigid and corrugated: Smooth wall
Brazing	Excellent
Corrosion properties	Very Good
Welding	Excellent
Workability	Excellent