EN 573-3 Grade AW-1200 H44

Want to keep this datasheet? Save it now in your required format

Description

Material EN AW-Al 99,0 is produced in large quantities for sheets, strips, plates, scraps, foils, for presswork components, rolled and pressed bars, for prematerial for heat exchanger. It is used in limited quantities for wire and prewire for mechanical application. It is food-safe. The material is comparable to trademark Al 99, material number 3.0205, acc. to DIN 1712-3 : 1976-12. It is well anodizable and shows favorable electrical and thermal conductivity. Smearing may occur on machining. Low mechanical strength, high strain. Formability as well as chemical and weathering resistance are excellent. This material is well suitable for welding and hard soldering. Application: apparatus engineering, roll bond, Z-bond, household appliances, storage and transport equipment for chemical, pharmaceutical and food industry, roofings, facings, arts-and-crafts, packagings, extruded parts, e.g. collapsible tubes, tubes, cans, bottles as well as for hardware and motor vehicle registration plates.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueTemperature

Density

2.71 - 2.72 g/cm³

Show Material materials with Density of 2.71 - 2.72 g/cm³ at 20.0 °C

20.0 °C

2.71 g/cm³

Show Material materials with Density of 2.71 g/cm³ at 23.0 °C

23.0 °C

Mechanical

PropertyValueTemperatureComment

Bending Fatigue Strength

50 MPa

Show Material materials with Bending Fatigue Strength of 50 MPa at 23.0 °C

23.0 °C

Elastic modulus

60 - 69 GPa

Show Material materials with Elastic modulus of 60 - 69 GPa at 20.0 °C

20.0 °C

69 GPa

Show Material materials with Elastic modulus of 69 GPa at 23.0 °C

23.0 °C

Unlock all property charts

Elongation A50

3 - 5 %

Show Material materials with Elongation A50 of 3 - 5 % at 20.0 °C

20.0 °C

3 - 5 %

Show Material materials with Elongation A50 of 3 - 5 % at 23.0 °C

23.0 °C

Unlock all property charts

Elongation A50, transverse

3 - 5 %

Show Material materials with Elongation A50, transverse of 3 - 5 % at 20.0 °C

20.0 °C

Plane-Strain Fracture Toughnes

22 - 35 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23.0 °C

23.0 °C

Typical for Wrought 1000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-] at 20.0 °C

20.0 °C

Shear modulus

24 - 26 GPa

Show Material materials with Shear modulus of 24 - 26 GPa at 20.0 °C

20.0 °C

25.9 GPa

Show Material materials with Shear modulus of 25.9 GPa at 23.0 °C

23.0 °C

Unlock all property charts

Tensile strength

110 - 155 MPa

Show Material materials with Tensile strength of 110 - 155 MPa at 20.0 °C

20.0 °C

100 - 145 MPa

Show Material materials with Tensile strength of 100 - 145 MPa at 23.0 °C

23.0 °C

Unlock all property charts

Tensile strength, transverse

110 - 155 MPa

Show Material materials with Tensile strength, transverse of 110 - 155 MPa at 20.0 °C

20.0 °C

Yield strength Rp0.2

90 MPa

Show Material materials with Yield strength Rp0.2 of 90 MPa at 20.0 °C

20.0 °C

80 MPa

Show Material materials with Yield strength Rp0.2 of 80 MPa at 23.0 °C

23.0 °C

Unlock all property charts

Yield strength Rp0.2, transverse

90 MPa

Show Material materials with Yield strength Rp0.2, transverse of 90 MPa at 20.0 °C

20.0 °C

Thermal

PropertyValueTemperature

Coefficient of thermal expansion

2.17E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.17E-5 1/K at -50.0 °C

-50.0 °C

2.17E-5 - 2.54E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.17E-5 - 2.54E-5 1/K at 20.0 °C

20.0 °C

2.35E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.35E-5 1/K at 100.0 °C

100.0 °C

2.44E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.44E-5 1/K at 200.0 °C

200.0 °C

2.54E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.54E-5 1/K at 300.0 °C

300.0 °C

Unlock all property charts

Melting point

644 - 657 °C

Show Material materials with Melting point of 644 - 657 °C

Specific heat capacity

898 J/(kg·K)

Show Material materials with Specific heat capacity of 898 J/(kg·K) at 20.0 °C

20.0 °C

Thermal conductivity

205 - 225 W/(m·K)

Show Material materials with Thermal conductivity of 205 - 225 W/(m·K) at 20.0 °C

20.0 °C

205 - 210 W/(m·K)

Show Material materials with Thermal conductivity of 205 - 210 W/(m·K) at 23.0 °C

23.0 °C

Unlock all property charts

Electrical

PropertyValueTemperature

Electrical conductivity

3.44E+7 - 3.55E+7 S/m

Show Material materials with Electrical conductivity of 3.44E+7 - 3.55E+7 S/m at 20.0 °C

20.0 °C

3.30E+7 - 3.40E+7 S/m

Show Material materials with Electrical conductivity of 3.30E+7 - 3.40E+7 S/m at 23.0 °C

23.0 °C

Unlock all property charts

Electrical resistivity

2.95E-8 Ω·m

Show Material materials with Electrical resistivity of 2.95E-8 Ω·m at 20.0 °C

20.0 °C

2.94E-8 - 3.03E-8 Ω·m

Show Material materials with Electrical resistivity of 2.94E-8 - 3.03E-8 Ω·m at 23.0 °C

23.0 °C

Unlock all property charts

Chemical properties

Property

Aluminium

99 %

Copper

0.05 %

Manganese

0.05 %

Other

Si + Fe < 1.00, each 0.05, total 0.15

Titanium

0.05 %

Zinc

0.1 %

Technological properties

Property
Anodizing

decorative: acceptable, Protective: very good

Brazing

hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good

Corrosion properties

Seawater: sufficient, weathering: acceptable

Workability

Bending / Spinning (cold): very good / very good, Impact extrusion (cold): very good, Deep drawing / upsetting (Condition) very good (H12) / very good (H12)