EN 573-3 Grade AW-6082 T5

Want to keep this datasheet? Save it now in your required format

Description

Age-hardenable AlMgSi alloy. The alloy is food safe.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

20.0 °C

2.7 g/cm³

Show Material materials with Density of 2.7 g/cm³

T5

EN 573-3

Profile

2.7 g/cm³

Show Material materials with Density of 2.7 g/cm³

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Bending Fatigue Strength

105.0 MPa

Show Material materials with Bending Fatigue Strength of 105.0 MPa

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Elastic modulus

20.0 °C

68.0 - 73.0 GPa

Show Material materials with Elastic modulus of 68.0 - 73.0 GPa

T5

EN 573-3

Profile

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Elongation

20.0 °C

6.0 %

Show Material materials with Elongation of 6.0 %

T5

EN 573-3

Profile

A50

6.0 %

Show Material materials with Elongation of 6.0 %

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

A50

20.0 °C

8.0 %

Show Material materials with Elongation of 8.0 %

T5

EN 573-3

Profile

8.0 %

Show Material materials with Elongation of 8.0 %

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

A100

Hardness, Brinell

20.0 °C

90.0 [-]

Show Material materials with Hardness, Brinell of 90.0 [-]

T5

EN 573-3

Profile

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 6000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 6000 Series Aluminium

Shear modulus

20.0 °C

26.0 - 27.0 GPa

Show Material materials with Shear modulus of 26.0 - 27.0 GPa

T5

EN 573-3

Profile

26.4 GPa

Show Material materials with Shear modulus of 26.4 GPa

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Tensile strength

20.0 °C

270.0 MPa

Show Material materials with Tensile strength of 270.0 MPa

T5

EN 573-3

Profile

270.0 MPa

Show Material materials with Tensile strength of 270.0 MPa

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Thermal

PropertyTemperatureValueConditionRelated StandardsShape

Coefficient of thermal expansion

100 °C, 20 °C

2.3399999999999996e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3399999999999996e-05 1/K

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Melting point

585.0 - 650.0 °C

Show Material materials with Melting point of 585.0 - 650.0 °C

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Specific heat capacity

896.0 J/(kg·K)

Show Material materials with Specific heat capacity of 896.0 J/(kg·K)

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Thermal conductivity

20.0 °C

170.0 - 220.0 W/(m·K)

Show Material materials with Thermal conductivity of 170.0 - 220.0 W/(m·K)

T5

EN 573-3, EN 755

Profile, Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Electrical

PropertyTemperatureValueConditionRelated StandardsShape

Electrical conductivity

20.0 °C

24000000.0 - 32000000.0 S/m

Show Material materials with Electrical conductivity of 24000000.0 - 32000000.0 S/m

T5

EN 573-3, EN 755

Profile, Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Electrical resistivity

3.13e-08 - 4.17e-08 Ω·m

Show Material materials with Electrical resistivity of 3.13e-08 - 4.17e-08 Ω·m

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.25 %

Show Material materials with Chromium of 0.25 %

T5

EN 573-3, EN 755

Profile, Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Copper

0.1 %

Show Material materials with Copper of 0.1 %

T5

EN 573-3, EN 755

Profile, Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Iron

0.5 %

Show Material materials with Iron of 0.5 %

T5

EN 573-3

Profile

0.50 %

Show Material materials with Iron of 0.50 %

T5

EN 573-3, EN 755

Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Magnesium

0.6 - 1.2 %

Show Material materials with Magnesium of 0.6 - 1.2 %

T5

EN 573-3, EN 755

Profile, Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Manganese

0.4 - 1.0 %

Show Material materials with Manganese of 0.4 - 1.0 %

T5

EN 573-3, EN 755

Profile, Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Silicon

0.7 - 1.3 %

Show Material materials with Silicon of 0.7 - 1.3 %

T5

EN 573-3, EN 755

Profile, Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Titanium

0.1 %

Show Material materials with Titanium of 0.1 %

T5

EN 573-3, EN 755

Profile, Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Zinc

0.2 %

Show Material materials with Zinc of 0.2 %

T5

EN 573-3, EN 755

Profile, Strip, Sheet, Plate, Wire, Forging, Tube, Bar

Technological properties

Property
Anodizing

decorative: acceptable, Protective: very good

Brazing

hard brazing (with flux/ without flux): good / sufficient, friction soldering: good, soft brazing with flux: acceptable

Corrosion properties

Seawater: good, weathering: very good

Workability

Bending / Spinning (cold): acceptable (T3, T4) / good (O), Impact extrusion (cold): good (O), Deep drawing / upsetting (Condition) good (O) / good (O)