EN 573-3 Grade AW-2007 O

Want to keep this datasheet? Save it now in your required format

Description

Related Standards

Equivalent Materials

Ashby charts

See where EN 573-3 Grade AW-2007 O falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.85 g/cm³ at 20 °C

Mechanical

Elastic modulus

E

72.5 GPa at 20 °C

Show 2000 Series materials with Elastic modulus of 72.5 GPa at 20 °C

Plane-Strain Fracture Toughnes

KIC

22 - 35 MPa·√m at 20 °C

Show 2000 Series materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 20 °C

Typical for Wrought 2000 Series Aluminium

Poisson's ratio

ν

0.33 [-] at 20 °C

Show 2000 Series materials with Poisson's ratio of 0.33 [-] at 20 °C

Typical for Wrought 2000 Series Aluminium

Shear modulus

G

27.3 GPa at 20 °C

Show 2000 Series materials with Shear modulus of 27.3 GPa at 20 °C

Thermal

Coefficient of thermal expansion

α

2.3E-5 1/K at 20 °C

Hide chart

Melting point

Tm

507 - 650 °C

Specific heat capacity

cp

860 J/(kg·K) at 20 °C

Thermal conductivity

λ

130 - 160 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

1.80E+7 - 2.20E+7 S/m at 20 °C

Electrical resistivity

ρel

4.55E-8 - 5.56E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Other

-

each 0.10, total 0.30, Rest Al

Cu

3.3 - 4.6 %

Fe

0.8 %

Pb

0.8 - 1.5 %

Si

0.8 %

More

Technological properties

Anodizing

Protective: poor

Brazing

friction soldering: sufficient

Corrosion properties

Seawater: poor, weathering: poor

Workability

Bending / Spinning (cold): sufficient / -, Deep drawing / upsetting (Condition) - / sufficient

This material data has been provided by AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.