EN 573-1 Grade AW-3003 O

Want to keep this datasheet? Save it now in your required format

Description

Good combination of resistance to corrosion, weldability and formability.

Related Standards

Equivalent Materials

Ashby charts

See where EN 573-1 Grade AW-3003 O falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.73 g/cm³ at 20 °C

Dimension

Dimensions

Dicke

Thickness

t

0.2 - 2 mm

Mechanical

Bending angle 180°

θ180

0 - 1 °/t at 20 °C

Show 3000 Series materials with Bending angle 180° of 0 - 1 °/t at 20 °C

Bending angle 90°

θ90

0 - 1.5 °/t at 20 °C

Show 3000 Series materials with Bending angle 90° of 0 - 1.5 °/t at 20 °C

Elastic modulus

E

70 GPa at -270 °C

Show 3000 Series materials with Elastic modulus of 70 GPa at -270 °C

Hide chart

Elongation

A

46 % at -196 °C

Show 3000 Series materials with Elongation of 46 % at -196 °C

Unlock all property charts

Elongation A100

A100

5 - 35 % at 20 °C

Show 3000 Series materials with Elongation A100 of 5 - 35 % at 20 °C

Elongation A50

A50

1 - 24 % at 20 °C

Show 3000 Series materials with Elongation A50 of 1 - 24 % at 20 °C

Elongation A50, transverse

A50,trans

15 - 24 % at 20 °C

Show 3000 Series materials with Elongation A50, transverse of 15 - 24 % at 20 °C

Elongation, transverse

A

23 % at 20 °C

Show 3000 Series materials with Elongation, transverse of 23 % at 20 °C

Hardness, Brinell

HB

28 - 30 [-] at 20 °C

Show 3000 Series materials with Hardness, Brinell of 28 - 30 [-] at 20 °C

Hardness, HBW

HBW

25 - 60 [-] at 20 °C

Show 3000 Series materials with Hardness, HBW of 25 - 60 [-] at 20 °C

Plane-Strain Fracture Toughnes

KIC

22 - 35 MPa·√m at 20 °C

Show 3000 Series materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 20 °C

Typical for Wrought 3000 Series Aluminium

Poisson's ratio

ν

0.33 [-] at 20 °C

Show 3000 Series materials with Poisson's ratio of 0.33 [-] at 20 °C

Shear modulus

G

24 - 26.5 GPa at 20 °C

Show 3000 Series materials with Shear modulus of 24 - 26.5 GPa at 20 °C

Tensile strength

Rm

230 MPa at -196 °C

Show 3000 Series materials with Tensile strength of 230 MPa at -196 °C

Unlock all property charts

Tensile strength, transverse

Rm,trans

95 - 135 MPa at 20 °C

Show 3000 Series materials with Tensile strength, transverse of 95 - 135 MPa at 20 °C

Yield strength

YS

35 MPa at 20 °C

Show 3000 Series materials with Yield strength of 35 MPa at 20 °C

Yield strength Rp0.2

Rp0.2

35 MPa at -270 °C

Show 3000 Series materials with Yield strength Rp0.2 of 35 MPa at -270 °C

Unlock all property charts

Yield strength Rp0.2, transverse

Rp0.2,trans

35 MPa at 20 °C

Show 3000 Series materials with Yield strength Rp0.2, transverse of 35 MPa at 20 °C

Thermal

Coefficient of thermal expansion

α

2.15E-5 1/K at -50 °C

20-100°C

Unlock all property charts

Melting point

Tm

640 - 655 °C

Specific heat capacity

cp

892 - 893 J/(kg·K) at 20 °C

Thermal conductivity

λ

159 - 200 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

2.20E+7 - 2.90E+7 S/m at 20 °C

Electrical resistivity

ρel

3.4E-8 - 4.5E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Other

-

each 0.05, total 0.15, Rest Al

Mn

1 - 1.5 %

Fe

0.7 %

Si

0.6 %

Zn

0.1 %

More

Technological properties

Anodizing

Good

Application areas

Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Sun Protection Systems: Single sheet (covering, sun breakers and gutters); Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels, Decoration; Furniture, Plinths, Blinds: Single sheet, Intermediate transformation/interior use; Anodizing Quality; Electronic devices: Housing of devices; Heat exchangers: Fins, Heat exchangers, General appliacations; Tubes: Industrial tubes, Flexible tube, Pipes; Wind energy: Nacelle coverings, Rotor, Hub, Stairs; Cosmetics: Cosmetics pieces; Semi-rigid and corrugated: Smooth wall; Automotive trim: Interior trims; Components: Heat shields, Automotive fins, Heat exchangers, General transportation

Brazing

Excellent

Corrosion properties

Very Good

Welding

Very Good

Workability

Very Good

This material data has been provided by Aludium,WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.