EN 573-3 Grade AW-3005 H48

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMn alloy. The alloy is food safe.

Related Standards

Equivalent Materials

Ashby charts

See where EN 573-3 Grade AW-3005 H48 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.72 g/cm³ at 20 °C

Dimension

Dimensions

Dicke

Mechanical

Elastic modulus

E

70 GPa at 20 °C

Show 3000 Series materials with Elastic modulus of 70 GPa at 20 °C

Elongation A50

A50

1 - 2 % at 20 °C

Show 3000 Series materials with Elongation A50 of 1 - 2 % at 20 °C

Elongation A50, transverse

A50,trans

1 - 2 % at 20 °C

Show 3000 Series materials with Elongation A50, transverse of 1 - 2 % at 20 °C

Plane-Strain Fracture Toughnes

KIC

22 - 35 MPa·√m at 20 °C

Show 3000 Series materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 20 °C

Typical for Wrought 3000 Series Aluminium

Poisson's ratio

ν

0.33 [-] at 20 °C

Show 3000 Series materials with Poisson's ratio of 0.33 [-] at 20 °C

Typical for Wrought 3000 Series Aluminium

Shear modulus

G

26.5 GPa at 20 °C

Show 3000 Series materials with Shear modulus of 26.5 GPa at 20 °C

Tensile strength

Rm

210 - 250 MPa at 20 °C

Show 3000 Series materials with Tensile strength of 210 - 250 MPa at 20 °C

Tensile strength, transverse

Rm,trans

210 MPa at 20 °C

Show 3000 Series materials with Tensile strength, transverse of 210 MPa at 20 °C

Yield strength Rp0.2

Rp0.2

180 - 230 MPa at 20 °C

Show 3000 Series materials with Yield strength Rp0.2 of 180 - 230 MPa at 20 °C

Yield strength Rp0.2, transverse

Rp0.2,trans

180 MPa at 20 °C

Show 3000 Series materials with Yield strength Rp0.2, transverse of 180 MPa at 20 °C

Thermal

Coefficient of thermal expansion

α

2.32E-5 1/K at 20 °C

Hide chart

Melting point

Tm

630 - 654 °C

Specific heat capacity

cp

893 J/(kg·K) at 20 °C

Thermal conductivity

λ

160 - 200 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

2.30E+7 - 2.80E+7 S/m at 20 °C

Electrical resistivity

ρel

4E-8 - 4.35E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Other

-

each 0.05, total 0.15, Rest Al

Mn

1 - 1.5 %

Fe

0.7 %

Si

0.6 %

Cu

0.3 %

More

Technological properties

Anodizing

decorative: sufficient, Protective: very good

Corrosion properties

Seawater: very good, weathering: very good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12)

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.