EN 573-3 Grade AW-3005 H111

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMn alloy. The alloy is food safe.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

20.0 °C

2.72 g/cm³

Show Material materials with Density of 2.72 g/cm³

H111

EN 573-3

Flat

2.72 g/cm³

Show Material materials with Density of 2.72 g/cm³

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Bending angle 180°

1.0 °/t

Show Material materials with Bending angle 180° of 1.0 °/t

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Bending angle 90°

1.0 °/t

Show Material materials with Bending angle 90° of 1.0 °/t

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

0.5 °/t

Show Material materials with Bending angle 90° of 0.5 °/t

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Elastic modulus

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Hardness, Brinell

20.0 °C

33.0 [-]

Show Material materials with Hardness, Brinell of 33.0 [-]

H111

EN 573-3

Flat

33.0 [-]

Show Material materials with Hardness, Brinell of 33.0 [-]

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 3000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 3000 Series Aluminium

Shear modulus

20.0 °C

26.5

Show Material materials with Shear modulus of 26.5

H111

EN 573-3

Flat

Tensile strength

20.0 °C

115.0 - 165.0 MPa

Show Material materials with Tensile strength of 115.0 - 165.0 MPa

H111

EN 573-3

Flat

Transverse

20.0 °C

115.0 - 165.0 MPa

Show Material materials with Tensile strength of 115.0 - 165.0 MPa

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube, Flat

Thermal

PropertyTemperatureValueConditionRelated StandardsShape

Coefficient of thermal expansion

100 °C, 20 °C

2.3199999999999998e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Melting point

630.0 - 654.0 °C

Show Material materials with Melting point of 630.0 - 654.0 °C

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Specific heat capacity

20.0 °C

893.0 J/(kg·K)

Show Material materials with Specific heat capacity of 893.0 J/(kg·K)

H111

EN 573-3

Flat

Thermal conductivity

20.0 °C

200.0 W/(m·K)

Show Material materials with Thermal conductivity of 200.0 W/(m·K)

H111

EN 573-3

Flat

160.0 - 190.0 W/(m·K)

Show Material materials with Thermal conductivity of 160.0 - 190.0 W/(m·K)

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Electrical

PropertyTemperatureValueConditionRelated StandardsShape

Electrical conductivity

20.0 °C

28000000.0 S/m

Show Material materials with Electrical conductivity of 28000000.0 S/m

H111

EN 573-3

Flat

23000000.0 - 25000000.0 S/m

Show Material materials with Electrical conductivity of 23000000.0 - 25000000.0 S/m

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Electrical resistivity

4e-08 - 4.35e-08 Ω·m

Show Material materials with Electrical resistivity of 4e-08 - 4.35e-08 Ω·m

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.1 %

Show Material materials with Chromium of 0.1 %

H111

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Welded Tube

Copper

0.3 %

Show Material materials with Copper of 0.3 %

H111

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Welded Tube

Iron

0.7 %

Show Material materials with Iron of 0.7 %

H111

EN 573-3

Flat

0.70 %

Show Material materials with Iron of 0.70 %

H111

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Magnesium

0.2 - 0.6 %

Show Material materials with Magnesium of 0.2 - 0.6 %

H111

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Welded Tube

Manganese

1.0 - 1.5 %

Show Material materials with Manganese of 1.0 - 1.5 %

H111

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Welded Tube

Silicon

0.6 %

Show Material materials with Silicon of 0.6 %

H111

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Welded Tube

Titanium

0.1 %

Show Material materials with Titanium of 0.1 %

H111

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Welded Tube

Zinc

0.25 %

Show Material materials with Zinc of 0.25 %

H111

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Welded Tube

Technological properties

Property
Anodizing

decorative: sufficient, Protective: very good

Corrosion properties

Seawater: very good, weathering: very good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12)