EN 573-3 Grade AW-3005 H19

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMn alloy. The alloy is food safe.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey,Aludium.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

20.0 °C

2.72 g/cm³

Show Material materials with Density of 2.72 g/cm³

H19

EN 573-3, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Sheet, Flat, Coil, Sheet

2.72 g/cm³

Show Material materials with Density of 2.72 g/cm³

H19

EN 573-3, EN 485, EN 541

Strip, Sheet, Plate, Welded Tube

Dimension

PropertyValueConditionRelated StandardsThicknessShape

Thickness

0.2 mm

Show Material materials with Thickness of 0.2 mm

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

0.2 mm

Coil, Sheet

2.0 mm

Show Material materials with Thickness of 2.0 mm

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

2.0 mm

Coil, Sheet

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Bending angle 180°

0 °/t

Show Material materials with Bending angle 180° of 0 °/t

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Bending angle 90°

0 °/t

Show Material materials with Bending angle 90° of 0 °/t

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Elastic modulus

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

H19

EN 573-3, EN 485, EN 541

Strip, Sheet, Plate, Welded Tube

69.0 GPa

Show Material materials with Elastic modulus of 69.0 GPa

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Hardness, Brinell

20.0 °C

73.0 [-]

Show Material materials with Hardness, Brinell of 73.0 [-]

H19

EN 573-3

Flat

73.0 [-]

Show Material materials with Hardness, Brinell of 73.0 [-]

H19

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Hardness, HBW

33.0 - 73.0 [-]

Show Material materials with Hardness, HBW of 33.0 - 73.0 [-]

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 3000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 3000 Series Aluminium

Shear modulus

20.0 °C

26.5 GPa

Show Material materials with Shear modulus of 26.5 GPa

H19

EN 573-3

Sheet, Flat

26.0 GPa

Show Material materials with Shear modulus of 26.0 GPa

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Tensile strength

235.0 MPa

Show Material materials with Tensile strength of 235.0 MPa

H19

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

20.0 °C

240.0 - 290.0 MPa

Show Material materials with Tensile strength of 240.0 - 290.0 MPa

H19

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

20.0 °C

235.0 MPa

Show Material materials with Tensile strength of 235.0 MPa

H19

EN 573-3

Flat

20.0 °C

210.0 - 290.0 MPa

Show Material materials with Tensile strength of 210.0 - 290.0 MPa

H19

EN 573-3

Sheet

20.0 °C

240.0 - 250.0 MPa

Show Material materials with Tensile strength of 240.0 - 250.0 MPa

H19

EN 573-3

Sheet

20.0 °C

210.0 - 250.0 MPa

Show Material materials with Tensile strength of 210.0 - 250.0 MPa

H19

EN 573-3

Sheet

115.0 - 290.0 MPa

Show Material materials with Tensile strength of 115.0 - 290.0 MPa

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20.0 °C

235.0 MPa

Show Material materials with Tensile strength of 235.0 MPa

H19

EN 573-3

Flat

Transverse

Yield strength

210.0 MPa

Show Material materials with Yield strength of 210.0 MPa

H19

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

RP02

20.0 °C

215.0 - 265.0 MPa

Show Material materials with Yield strength of 215.0 - 265.0 MPa

H19

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

RP02

20.0 °C

210.0 MPa

Show Material materials with Yield strength of 210.0 MPa

H19

EN 573-3

Flat

RP02

20.0 °C

190.0 - 265.0 MPa

Show Material materials with Yield strength of 190.0 - 265.0 MPa

H19

EN 573-3

Sheet

RP02

20.0 °C

215.0 - 230.0 MPa

Show Material materials with Yield strength of 215.0 - 230.0 MPa

H19

EN 573-3

Sheet

RP02

20.0 °C

190.0 - 230.0 MPa

Show Material materials with Yield strength of 190.0 - 230.0 MPa

H19

EN 573-3

Sheet

RP02

20.0 °C

210.0 MPa

Show Material materials with Yield strength of 210.0 MPa

H19

EN 573-3

Flat

RP02 Transverse

45 MPa

Show Material materials with Yield strength of 45 MPa

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Unlock all property charts

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

100 °C

0.000024 1/K

Show Material materials with Coefficient of thermal expansion of 0.000024 1/K

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20-100°C

100 °C, 20 °C

2.3199999999999998e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K

H19

EN 573-3, EN 485, EN 541

Strip, Sheet, Plate, Welded Tube

Unlock all property charts

Melting point

630.0 - 654.0 °C

Show Material materials with Melting point of 630.0 - 654.0 °C

H19

EN 573-3, EN 485, EN 541

Strip, Sheet, Plate, Welded Tube

Specific heat capacity

20.0 °C

893.0 J/(kg·K)

Show Material materials with Specific heat capacity of 893.0 J/(kg·K)

H19

EN 573-3

Sheet, Flat

Thermal conductivity

20.0 °C

200.0 W/(m·K)

Show Material materials with Thermal conductivity of 200.0 W/(m·K)

H19

EN 573-3

Sheet, Flat

160.0 - 190.0 W/(m·K)

Show Material materials with Thermal conductivity of 160.0 - 190.0 W/(m·K)

H19

EN 573-3, EN 485, EN 541

Strip, Sheet, Plate, Welded Tube

172 W/(m·K)

Show Material materials with Thermal conductivity of 172 W/(m·K)

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Electrical

PropertyTemperatureValueConditionRelated StandardsShape

Electrical conductivity

20.0 °C

28000000.0 S/m

Show Material materials with Electrical conductivity of 28000000.0 S/m

H19

EN 573-3

Sheet, Flat

23000000.0 - 25000000.0 S/m

Show Material materials with Electrical conductivity of 23000000.0 - 25000000.0 S/m

H19

EN 573-3, EN 485, EN 541

Strip, Sheet, Plate, Welded Tube

Electrical resistivity

4e-08 - 4.35e-08 Ω·m

Show Material materials with Electrical resistivity of 4e-08 - 4.35e-08 Ω·m

H19

EN 573-3, EN 485, EN 541

Strip, Sheet, Plate, Welded Tube

3.7999999999999996e-08 Ω·m

Show Material materials with Electrical resistivity of 3.7999999999999996e-08 Ω·m

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.1 %

Show Material materials with Chromium of 0.1 %

H19

EN 573-3, EN 485, EN 541

Sheet, Flat, Strip, Plate, Welded Tube

0.1 %

Show Material materials with Chromium of 0.1 %

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Copper

0.3 %

Show Material materials with Copper of 0.3 %

H19

EN 573-3, EN 485, EN 541

Sheet, Flat, Strip, Plate, Welded Tube

0.3 %

Show Material materials with Copper of 0.3 %

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Iron

0.7 %

Show Material materials with Iron of 0.7 %

H19

EN 573-3

Sheet, Flat

0.70 %

Show Material materials with Iron of 0.70 %

H19

EN 573-3, EN 485, EN 541

Strip, Sheet, Plate, Welded Tube

0.7 %

Show Material materials with Iron of 0.7 %

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Magnesium

0.2 - 0.6 %

Show Material materials with Magnesium of 0.2 - 0.6 %

H19

EN 573-3, EN 485, EN 541, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Sheet, Flat, Strip, Plate, Welded Tube, Coil, Sheet

Manganese

1.0 - 1.5 %

Show Material materials with Manganese of 1.0 - 1.5 %

H19

EN 573-3, EN 485, EN 541, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Sheet, Flat, Strip, Plate, Welded Tube, Coil, Sheet

Silicon

0.6 %

Show Material materials with Silicon of 0.6 %

H19

EN 573-3, EN 485, EN 541

Sheet, Flat, Strip, Plate, Welded Tube

0.6 %

Show Material materials with Silicon of 0.6 %

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Titanium

0.1 %

Show Material materials with Titanium of 0.1 %

H19

EN 573-3, EN 485, EN 541

Sheet, Flat, Strip, Plate, Welded Tube

Zinc

0.25 %

Show Material materials with Zinc of 0.25 %

H19

EN 573-3, EN 485, EN 541

Sheet, Flat, Strip, Plate, Welded Tube

0.25 %

Show Material materials with Zinc of 0.25 %

H19

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Technological properties

Property
Anodizing

decorative: sufficient, Protective: very good

Application areas

Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Sun Protection Systems: Single sheet (covering, sun breakers and gutters); Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels, Decoration; Electronic devices: Housing of devices; Insulation; Cosmetics: Cosmetics pieces

Brazing

Good

Corrosion properties

Seawater: very good, weathering: very good

Welding

Good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12)