EN 573-3 Grade AW-3005 H25

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMn alloy. The alloy is food safe.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey,Aludium.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

2.72 g/cm³

Show Material materials with Density of 2.72 g/cm³

H25

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

20.0 °C

2.72 g/cm³

Show Material materials with Density of 2.72 g/cm³

H25

EN 573-3, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Sheet, Coil, Sheet

Dimension

PropertyValueConditionRelated StandardsThicknessShape

Thickness

0.18 mm

Show Material materials with Thickness of 0.18 mm

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

0.18 mm

Coil, Sheet

0.3 mm

Show Material materials with Thickness of 0.3 mm

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

0.3 mm

Coil, Sheet

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Elastic modulus

69.0 GPa

Show Material materials with Elastic modulus of 69.0 GPa

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

H25

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 3000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 3000 Series Aluminium

Shear modulus

26.0 GPa

Show Material materials with Shear modulus of 26.0 GPa

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20.0 °C

26.5 GPa

Show Material materials with Shear modulus of 26.5 GPa

H25

EN 573-3

Sheet

Tensile strength

180.0 - 250.0 MPa

Show Material materials with Tensile strength of 180.0 - 250.0 MPa

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20.0 °C

180.0 - 220.0 MPa

Show Material materials with Tensile strength of 180.0 - 220.0 MPa

H25

EN 573-3, EN 541

Sheet, Strip, Plate, Welded Tube

Yield strength

160.0 - 230.0 MPa

Show Material materials with Yield strength of 160.0 - 230.0 MPa

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20.0 °C

160.0 - 200.0 MPa

Show Material materials with Yield strength of 160.0 - 200.0 MPa

H25

EN 573-3, EN 541

Sheet, Strip, Plate, Welded Tube

RP02

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

20 °C

2.3199999999999998e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K

H25

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

100 °C

2.3199999999999998e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K

H25

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

100 °C

0.000024 1/K

Show Material materials with Coefficient of thermal expansion of 0.000024 1/K

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20-100°C

Melting point

630.0 - 654.0 °C

Show Material materials with Melting point of 630.0 - 654.0 °C

H25

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

Specific heat capacity

20.0 °C

893.0 J/(kg·K)

Show Material materials with Specific heat capacity of 893.0 J/(kg·K)

H25

EN 573-3

Sheet

Thermal conductivity

160.0 - 190.0 W/(m·K)

Show Material materials with Thermal conductivity of 160.0 - 190.0 W/(m·K)

H25

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

172 W/(m·K)

Show Material materials with Thermal conductivity of 172 W/(m·K)

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20.0 °C

200.0 W/(m·K)

Show Material materials with Thermal conductivity of 200.0 W/(m·K)

H25

EN 573-3

Sheet

Electrical

PropertyTemperatureValueConditionRelated StandardsShape

Electrical conductivity

23000000.0 - 25000000.0 S/m

Show Material materials with Electrical conductivity of 23000000.0 - 25000000.0 S/m

H25

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

20.0 °C

28000000.0 S/m

Show Material materials with Electrical conductivity of 28000000.0 S/m

H25

EN 573-3

Sheet

Electrical resistivity

3.7999999999999996e-08 Ω·m

Show Material materials with Electrical resistivity of 3.7999999999999996e-08 Ω·m

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

4e-08 - 4.35e-08 Ω·m

Show Material materials with Electrical resistivity of 4e-08 - 4.35e-08 Ω·m

H25

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.1 %

Show Material materials with Chromium of 0.1 %

H25

EN 573-3, EN 541

Sheet, Strip, Plate, Welded Tube

0.1 %

Show Material materials with Chromium of 0.1 %

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Copper

0.3 %

Show Material materials with Copper of 0.3 %

H25

EN 573-3, EN 541

Sheet, Strip, Plate, Welded Tube

0.3 %

Show Material materials with Copper of 0.3 %

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Iron

0.7 %

Show Material materials with Iron of 0.7 %

H25

EN 573-3

Sheet

0.70 %

Show Material materials with Iron of 0.70 %

H25

EN 573-3, EN 541

Strip, Sheet, Plate, Welded Tube

0.7 %

Show Material materials with Iron of 0.7 %

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Magnesium

0.2 - 0.6 %

Show Material materials with Magnesium of 0.2 - 0.6 %

H25

EN 573-3, EN 541, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Sheet, Strip, Plate, Welded Tube, Coil, Sheet

Manganese

1.0 - 1.5 %

Show Material materials with Manganese of 1.0 - 1.5 %

H25

EN 573-3, EN 541, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Sheet, Strip, Plate, Welded Tube, Coil, Sheet

Silicon

0.6 %

Show Material materials with Silicon of 0.6 %

H25

EN 573-3, EN 541

Sheet, Strip, Plate, Welded Tube

0.6 %

Show Material materials with Silicon of 0.6 %

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Titanium

0.1 %

Show Material materials with Titanium of 0.1 %

H25

EN 573-3, EN 541

Sheet, Strip, Plate, Welded Tube

Zinc

0.25 %

Show Material materials with Zinc of 0.25 %

H25

EN 573-3, EN 541

Sheet, Strip, Plate, Welded Tube

0.25 %

Show Material materials with Zinc of 0.25 %

H25

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Technological properties

Property
Anodizing

decorative: sufficient, Protective: very good

Application areas

Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Sun Protection Systems: Single sheet (covering, sun breakers and gutters); Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels, Decoration; Electronic devices: Housing of devices; Insulation; Cosmetics: Cosmetics pieces

Brazing

Good

Corrosion properties

Seawater: very good, weathering: very good

Welding

Good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12)