EN 573-3 Grade AW-3105 F

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMn alloy. The alloy is not food safe.

Related Standards

Equivalent Materials

Ashby charts

See where EN 573-3 Grade AW-3105 F falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.71 - 2.72 g/cm³ at 20 °C

Dimension

Dimensions

Dicke

Mechanical

Elastic modulus

E

69 - 70 GPa at 20 °C

Show 3000 Series materials with Elastic modulus of 69 - 70 GPa at 20 °C

Plane-Strain Fracture Toughnes

KIC

22 - 35 MPa·√m at 20 °C

Show 3000 Series materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 20 °C

Typical for Wrought 3000 Series Aluminium

Poisson's ratio

ν

0.33 [-] at 20 °C

Show 3000 Series materials with Poisson's ratio of 0.33 [-] at 20 °C

Typical for Wrought 3000 Series Aluminium

Shear modulus

G

25 - 26 GPa at 20 °C

Show 3000 Series materials with Shear modulus of 25 - 26 GPa at 20 °C

Typical for Wrought 3000 Series Aluminium

Tensile strength

Rm

100 MPa at 20 °C

Show 3000 Series materials with Tensile strength of 100 MPa at 20 °C

Tensile strength, transverse

Rm,trans

100 MPa at 20 °C

Show 3000 Series materials with Tensile strength, transverse of 100 MPa at 20 °C

Thermal

Coefficient of thermal expansion

α

2.36E-5 1/K at 20 °C

Hide chart

Melting point

Tm

635 - 655 °C

Specific heat capacity

cp

893 - 920 J/(kg·K) at 20 °C

Typical for Wrought 3000 Series Aluminium

Thermal conductivity

λ

160 - 190 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

2.30E+7 - 2.70E+7 S/m at 20 °C

Electrical resistivity

ρel

3.85E-8 - 4.35E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Other

-

each 0.05, total 0.15, Rest Al

Fe

0.7 %

Si

0.6 %

Zn

0.4 %

Cu

0.3 %

More

Technological properties

Brazing

hard brazing (with flux/ without flux): very good - acceptable / very good

Corrosion properties

Seawater: very good, weathering: very good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (H14) / acceptable (H12)

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.