EN 573-3 Grade AW-3105 H22

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMn alloy. The alloy is not food safe.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

20.0 °C

2.71 g/cm³

Show Material materials with Density of 2.71 g/cm³

H22

EN 573-3

Flat

2.72 g/cm³

Show Material materials with Density of 2.72 g/cm³

H22

EN 573-3, EN 485

Strip, Sheet, Plate

2.71 g/cm³

Show Material materials with Density of 2.71 g/cm³

H22

EN 573-3, EN 485

Strip, Sheet, Plate

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Elastic modulus

69.0 GPa

Show Material materials with Elastic modulus of 69.0 GPa

H22

EN 573-3, EN 485

Strip, Sheet, Plate

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

H22

EN 573-3, EN 485

Strip, Sheet, Plate

Hardness, Brinell

20.0 °C

41.0 [-]

Show Material materials with Hardness, Brinell of 41.0 [-]

H22

EN 573-3

Flat

41.0 [-]

Show Material materials with Hardness, Brinell of 41.0 [-]

H22

EN 573-3, EN 485

Strip, Sheet, Plate

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 3000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 3000 Series Aluminium

Shear modulus

25.0 - 26.0 GPa

Show Material materials with Shear modulus of 25.0 - 26.0 GPa

Typical for Wrought 3000 Series Aluminium

Tensile strength

20.0 °C

130.0 - 180.0 MPa

Show Material materials with Tensile strength of 130.0 - 180.0 MPa

H22

EN 573-3

Flat

Transverse

20.0 °C

130.0 - 180.0 MPa

Show Material materials with Tensile strength of 130.0 - 180.0 MPa

H22

EN 573-3, EN 485

Strip, Sheet, Plate, Flat

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

100 °C, 20 °C

2.36e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.36e-05 1/K

H22

EN 573-3, EN 485

Strip, Sheet, Plate

Melting point

635.0 - 655.0 °C

Show Material materials with Melting point of 635.0 - 655.0 °C

H22

EN 573-3, EN 485

Strip, Sheet, Plate

640.0 - 655.0 °C

Show Material materials with Melting point of 640.0 - 655.0 °C

H22

EN 573-3, EN 485

Strip, Sheet, Plate

Specific heat capacity

893.0 - 920.0 J/(kg·K)

Show Material materials with Specific heat capacity of 893.0 - 920.0 J/(kg·K)

Typical for Wrought 3000 Series Aluminium

Thermal conductivity

20.0 °C

180.0 - 190.0 W/(m·K)

Show Material materials with Thermal conductivity of 180.0 - 190.0 W/(m·K)

H22

EN 573-3

Flat

172 W/(m·K)

Show Material materials with Thermal conductivity of 172 W/(m·K)

H22

EN 573-3, EN 485

Strip, Sheet, Plate

160.0 - 190.0 W/(m·K)

Show Material materials with Thermal conductivity of 160.0 - 190.0 W/(m·K)

H22

EN 573-3, EN 485

Strip, Sheet, Plate

Electrical

PropertyTemperatureValueConditionRelated StandardsShape

Electrical conductivity

20.0 °C

25000000.0 - 27000000.0 S/m

Show Material materials with Electrical conductivity of 25000000.0 - 27000000.0 S/m

H22

EN 573-3

Flat

26000000.0 S/m

Show Material materials with Electrical conductivity of 26000000.0 S/m

H22

EN 573-3, EN 485

Strip, Sheet, Plate

23000000.0 - 26000000.0 S/m

Show Material materials with Electrical conductivity of 23000000.0 - 26000000.0 S/m

H22

EN 573-3, EN 485

Strip, Sheet, Plate

Electrical resistivity

3.85e-08 Ω·m

Show Material materials with Electrical resistivity of 3.85e-08 Ω·m

H22

EN 573-3, EN 485

Strip, Sheet, Plate

3.85e-08 - 4.35e-08 Ω·m

Show Material materials with Electrical resistivity of 3.85e-08 - 4.35e-08 Ω·m

H22

EN 573-3, EN 485

Strip, Sheet, Plate

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.2 %

Show Material materials with Chromium of 0.2 %

H22

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Copper

0.3 %

Show Material materials with Copper of 0.3 %

H22

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Iron

0.7 %

Show Material materials with Iron of 0.7 %

H22

EN 573-3

Flat

0.70 %

Show Material materials with Iron of 0.70 %

H22

EN 573-3, EN 485

Strip, Sheet, Plate

Magnesium

0.2 - 0.8 %

Show Material materials with Magnesium of 0.2 - 0.8 %

H22

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Manganese

0.3 - 0.8 %

Show Material materials with Manganese of 0.3 - 0.8 %

H22

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Silicon

0.6 %

Show Material materials with Silicon of 0.6 %

H22

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Titanium

0.1 %

Show Material materials with Titanium of 0.1 %

H22

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Zinc

0.4 %

Show Material materials with Zinc of 0.4 %

H22

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Technological properties

Property
Brazing

hard brazing (with flux/ without flux): very good - acceptable / very good

Corrosion properties

Seawater: very good, weathering: very good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (H14) / acceptable (H12)