General
Property | Temperature | Value | Condition | Related Standards | Shape |
---|---|---|---|---|---|
Density | 2.73 g/cm³ Show Material materials with Density of 2.73 g/cm³ | H27 | EN 573-3, EN 541 | Strip, Sheet, Plate | |
20.0 °C | 2.71 g/cm³ Show Material materials with Density of 2.71 g/cm³ | H27 | EN 573-3 | Sheet |
Mechanical
Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
---|---|---|---|---|---|---|
Elastic modulus | 70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa | H27 | EN 573-3, EN 541 | Strip, Sheet, Plate | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 3000 Series Aluminium | ||||
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] | Typical for Wrought 3000 Series Aluminium | ||||
Shear modulus | 20.0 °C | 26.5 Show Material materials with Shear modulus of 26.5 | H27 | EN 573-3 | Sheet | |
Tensile strength | 20.0 °C | 170.0 - 210.0 MPa Show Material materials with Tensile strength of 170.0 - 210.0 MPa | H27 | EN 573-3, EN 541 | Sheet, Strip, Plate |
Thermal
Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
---|---|---|---|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.4e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.2e-05 - 2.4e-05 1/K | Typical for Wrought 3000 Series Aluminium | ||||
Melting point | 629.0 - 654.0 °C Show Material materials with Melting point of 629.0 - 654.0 °C | Typical for Wrought 3000 Series Aluminium | ||||
Specific heat capacity | 20.0 °C | 893.0 J/(kg·K) Show Material materials with Specific heat capacity of 893.0 J/(kg·K) | H27 | EN 573-3 | Sheet | |
Thermal conductivity | 20.0 °C | 200.0 Show Material materials with Thermal conductivity of 200.0 | H27 | EN 573-3 | Sheet |
Electrical
Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
---|---|---|---|---|---|---|
Electrical conductivity | 20.0 °C | 28000000.0 Show Material materials with Electrical conductivity of 28000000.0 | H27 | EN 573-3 | Sheet | |
Electrical resistivity | 3.4e-08 - 4.2e-08 Ω·m Show Material materials with Electrical resistivity of 3.4e-08 - 4.2e-08 Ω·m | Typical for Wrought 3000 Series Aluminium |
Chemical properties
Property | Value | Condition | Related Standards | Shape |
---|---|---|---|---|
Copper | 0.1 % Show Material materials with Copper of 0.1 % | H27 | EN 573-3, EN 541 | Sheet, Strip, Plate |
Iron | 0.45 % Show Material materials with Iron of 0.45 % | H27 | EN 573-3 | Sheet |
0.45 % Show Material materials with Iron of 0.45 % | H27 | EN 573-3, EN 541 | Strip, Sheet, Plate | |
Magnesium | 0.1 % Show Material materials with Magnesium of 0.1 % | H27 | EN 573-3, EN 541 | Sheet, Strip, Plate |
Manganese | 0.4 - 0.8 % Show Material materials with Manganese of 0.4 - 0.8 % | H27 | EN 573-3, EN 541 | Sheet, Strip, Plate |
Silicon | 0.3 % Show Material materials with Silicon of 0.3 % | H27 | EN 573-3, EN 541 | Sheet, Strip, Plate |
Zinc | 0.1 % Show Material materials with Zinc of 0.1 % | H27 | EN 573-3, EN 541 | Sheet, Strip, Plate |
Technological properties
Property | ||
---|---|---|
Anodizing | decorative: sufficient, Protective: very good | |
Brazing | hard brazing (with flux/ without flux): very good / very good | |
Corrosion properties | Seawater: good, weathering: very good | |
Workability | Bending / Spinning (cold): very good / very good, Impact extrusion (cold): good, Deep drawing / upsetting (Condition) very good (O) / very good (H12) |