EN 573-3 Grade AW-3207 F

Want to keep this datasheet? Save it now in your required format

Description

Related Standards

Equivalent Materials

Ashby charts

See where EN 573-3 Grade AW-3207 F falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.73 g/cm³ at 20 °C

Dimension

Dimensions

Durchmesser

Mechanical

Elastic modulus

E

70 GPa at 20 °C

Show 3000 Series materials with Elastic modulus of 70 GPa at 20 °C

Hardness, Brinell

HB

25 [-] at 20 °C

Show 3000 Series materials with Hardness, Brinell of 25 [-] at 20 °C

Plane-Strain Fracture Toughnes

KIC

22 - 35 MPa·√m at 20 °C

Show 3000 Series materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 20 °C

Typical for Wrought 3000 Series Aluminium

Poisson's ratio

ν

0.33 [-] at 20 °C

Show 3000 Series materials with Poisson's ratio of 0.33 [-] at 20 °C

Typical for Wrought 3000 Series Aluminium

Shear modulus

G

25 - 26 GPa at 20 °C

Show 3000 Series materials with Shear modulus of 25 - 26 GPa at 20 °C

Typical for Wrought 3000 Series Aluminium

Thermal

Coefficient of thermal expansion

α

2.2E-5 - 2.4E-5 1/K at 20 °C

Typical for Wrought 3000 Series Aluminium

Melting point

Tm

629 - 654 °C

Typical for Wrought 3000 Series Aluminium

Specific heat capacity

cp

893 - 920 J/(kg·K) at 20 °C

Typical for Wrought 3000 Series Aluminium

Thermal conductivity

λ

154 - 193 W/(m·K) at 20 °C

Typical for Wrought 3000 Series Aluminium

Electrical

Electrical conductivity

σel

2.30E+7 - 2.90E+7 S/m at 20 °C

Typical for Wrought 3000 Series Aluminium

Electrical resistivity

ρel

3.4E-8 - 4.2E-8 Ω·m at 20 °C

Typical for Wrought 3000 Series Aluminium

Chemical properties

Element

Weight %

Comment

Other

-

each 0.05, total 0.10, Rest Al

Fe

0.45 %

Mn

0.4 - 0.8 %

Si

0.3 %

Cu

0.1 %

More

Technological properties

Anodizing

decorative: sufficient, Protective: very good

Brazing

hard brazing (with flux/ without flux): very good / very good

Corrosion properties

Seawater: good, weathering: very good

Workability

Bending / Spinning (cold): very good / very good, Impact extrusion (cold): good, Deep drawing / upsetting (Condition) very good (O) / very good (H12)

This material data has been provided by AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.