EN 573-3 Grade AW-5005 H34

Want to keep this datasheet? Save it now in your required format

Description

Aluminum EN AW-5005 is a lean aluminum magnesium alloy with low density and excellent thermal conductivity. This medium strength non-heat-treatable alloy is known for its corrosion resistance in alkaline marine situations. Aluminum EN AW-5005 is readily machinable, and can be welded using TIG and MIG methods. It is important to note that anodizing is a critical part to how Aluminum EN AW-5005 is used.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

20.0 °C

2.7 g/cm³

Show Material materials with Density of 2.7 g/cm³

H34

EN 573-3

Flat

2.7 g/cm³

Show Material materials with Density of 2.7 g/cm³

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Bending Fatigue Strength

75.0 MPa

Show Material materials with Bending Fatigue Strength of 75.0 MPa

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Bending angle 180°

1.5 °/t

Show Material materials with Bending angle 180° of 1.5 °/t

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

2.0 °/t

Show Material materials with Bending angle 180° of 2.0 °/t

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Bending angle 90°

1.0 °/t

Show Material materials with Bending angle 90° of 1.0 °/t

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

2.0 °/t

Show Material materials with Bending angle 90° of 2.0 °/t

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

2.5 °/t

Show Material materials with Bending angle 90° of 2.5 °/t

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

0.5 °/t

Show Material materials with Bending angle 90° of 0.5 °/t

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Elastic modulus

20.0 °C

69.5 GPa

Show Material materials with Elastic modulus of 69.5 GPa

H34

EN 573-3

Flat

69.5 GPa

Show Material materials with Elastic modulus of 69.5 GPa

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

69.0 GPa

Show Material materials with Elastic modulus of 69.0 GPa

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Hardness, Brinell

20.0 °C

47.0 [-]

Show Material materials with Hardness, Brinell of 47.0 [-]

H34

EN 573-3

Flat

47.0 [-]

Show Material materials with Hardness, Brinell of 47.0 [-]

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

20.0 °C

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

H34

EN 573-3

Flat

Shear modulus

20.0 °C

26.1 GPa

Show Material materials with Shear modulus of 26.1 GPa

H34

EN 573-3

Flat

26.1 GPa

Show Material materials with Shear modulus of 26.1 GPa

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Tensile strength

20.0 °C

145.0 - 185.0 MPa

Show Material materials with Tensile strength of 145.0 - 185.0 MPa

H34

EN 573-3

Flat

Transverse

20.0 °C

145.0 - 185.0 MPa

Show Material materials with Tensile strength of 145.0 - 185.0 MPa

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar, Flat

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

100 °C, 20 °C

2.38e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.38e-05 1/K

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Max service temperature

150.0 °C

Show Material materials with Max service temperature of 150.0 °C

Typical for Wrought 5000 Series Aluminium

Melting point

630.0 - 655.0 °C

Show Material materials with Melting point of 630.0 - 655.0 °C

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Specific heat capacity

20.0 °C

897.0 J/(kg·K)

Show Material materials with Specific heat capacity of 897.0 J/(kg·K)

H34

EN 573-3

Flat

Thermal conductivity

20.0 °C

201.0 W/(m·K)

Show Material materials with Thermal conductivity of 201.0 W/(m·K)

H34

EN 573-3

Flat

201 W/(m·K)

Show Material materials with Thermal conductivity of 201 W/(m·K)

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Electrical

PropertyTemperatureValueConditionRelated StandardsShape

Electrical conductivity

30000000.0 S/m

Show Material materials with Electrical conductivity of 30000000.0 S/m

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Electrical resistivity

20.0 °C

3.3e-08 Ω·m

Show Material materials with Electrical resistivity of 3.3e-08 Ω·m

H34

EN 573-3

Flat

3.33e-08 Ω·m

Show Material materials with Electrical resistivity of 3.33e-08 Ω·m

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.1 %

Show Material materials with Chromium of 0.1 %

H34

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Tube, Welded Tube, Bar

Copper

0.2 %

Show Material materials with Copper of 0.2 %

H34

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Tube, Welded Tube, Bar

Iron

0.7 %

Show Material materials with Iron of 0.7 %

H34

EN 573-3

Flat

0.70 %

Show Material materials with Iron of 0.70 %

H34

EN 573-3, EN 485

Strip, Sheet, Plate, Tube, Welded Tube, Bar

Magnesium

0.5 - 1.1 %

Show Material materials with Magnesium of 0.5 - 1.1 %

H34

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Tube, Welded Tube, Bar

Manganese

0.2 %

Show Material materials with Manganese of 0.2 %

H34

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Tube, Welded Tube, Bar

Silicon

0.3 %

Show Material materials with Silicon of 0.3 %

H34

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Tube, Welded Tube, Bar

Zinc

0.25 %

Show Material materials with Zinc of 0.25 %

H34

EN 573-3, EN 485

Flat, Strip, Sheet, Plate, Tube, Welded Tube, Bar

Technological properties

Property
Anodizing

decorative: acceptable, Protective: very good

Brazing

hard brazing (with flux/ without flux): acceptable / sufficient, friction soldering: good, soft brazing with flux: sufficient

Corrosion properties

Seawater: good, weathering: very good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) good (O) / good (O)