EN 573-3 Grade AW-5050 H26

Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMg alloy. The alloy is food safe.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueConditionRelated StandardsShape

Density

2.68 g/cm³

Show Material materials with Density of 2.68 g/cm³

H26

EN 573-3, EN 485

Strip, Sheet, Plate

2.69 g/cm³

Show Material materials with Density of 2.69 g/cm³

H26

EN 573-3, EN 485

Strip, Sheet, Plate

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Bending angle 90°

1.0 °/t

Show Material materials with Bending angle 90° of 1.0 °/t

H26

EN 573-3, EN 485

Strip, Sheet, Plate

1.5 °/t

Show Material materials with Bending angle 90° of 1.5 °/t

H26

EN 573-3, EN 485

Strip, Sheet, Plate

2.5 °/t

Show Material materials with Bending angle 90° of 2.5 °/t

H26

EN 573-3, EN 485

Strip, Sheet, Plate

3.0 °/t

Show Material materials with Bending angle 90° of 3.0 °/t

H26

EN 573-3, EN 485

Strip, Sheet, Plate

Elastic modulus

69.0 GPa

Show Material materials with Elastic modulus of 69.0 GPa

H26

EN 573-3, EN 485

Strip, Sheet, Plate

70.0 GPa

Show Material materials with Elastic modulus of 70.0 GPa

H26

EN 573-3, EN 485

Strip, Sheet, Plate

Hardness, Brinell

60.0 [-]

Show Material materials with Hardness, Brinell of 60.0 [-]

H26

EN 573-3, EN 485

Strip, Sheet, Plate

20.0 °C

52.0 - 60.0 [-]

Show Material materials with Hardness, Brinell of 52.0 - 60.0 [-]

H26

EN 573-3

Flat

20.0 °C

52.0 [-]

Show Material materials with Hardness, Brinell of 52.0 [-]

H26

EN 573-3

Flat

20.0 °C

60.0 [-]

Show Material materials with Hardness, Brinell of 60.0 [-]

H26

EN 573-3

Flat

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 5000 Series Aluminium

Shear modulus

26.0 - 26.5 GPa

Show Material materials with Shear modulus of 26.0 - 26.5 GPa

Typical for Wrought 5000 Series Aluminium

Tensile strength

20.0 °C

165.0 - 235.0 MPa

Show Material materials with Tensile strength of 165.0 - 235.0 MPa

H26

EN 573-3

Flat

20.0 °C

165.0 - 205.0 MPa

Show Material materials with Tensile strength of 165.0 - 205.0 MPa

H26

EN 573-3

Flat

20.0 °C

195.0 - 235.0 MPa

Show Material materials with Tensile strength of 195.0 - 235.0 MPa

H26

EN 573-3

Flat

Transverse

20.0 °C

195.0 - 235.0 MPa

Show Material materials with Tensile strength of 195.0 - 235.0 MPa

H26

EN 573-3, EN 485

Strip, Sheet, Plate, Flat

20.0 °C

195.0 - 205.0 MPa

Show Material materials with Tensile strength of 195.0 - 205.0 MPa

H26

EN 573-3

Flat

Unlock all property charts

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

20 °C

2.38e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.38e-05 1/K

H26

EN 573-3, EN 485

Strip, Sheet, Plate

100 °C

2.38e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.38e-05 1/K

H26

EN 573-3, EN 485

Strip, Sheet, Plate

Unlock all property charts

Max service temperature

150.0 °C

Show Material materials with Max service temperature of 150.0 °C

Typical for Wrought 5000 Series Aluminium

Melting point

620.0 - 650.0 °C

Show Material materials with Melting point of 620.0 - 650.0 °C

H26

EN 573-3, EN 485

Strip, Sheet, Plate

625.0 - 650.0 °C

Show Material materials with Melting point of 625.0 - 650.0 °C

H26

EN 573-3, EN 485

Strip, Sheet, Plate

Specific heat capacity

879.0 - 963.0 J/(kg·K)

Show Material materials with Specific heat capacity of 879.0 - 963.0 J/(kg·K)

Typical for Wrought 5000 Series Aluminium

Thermal conductivity

170.0 - 190.0 W/(m·K)

Show Material materials with Thermal conductivity of 170.0 - 190.0 W/(m·K)

H26

EN 573-3, EN 485

Strip, Sheet, Plate

193 W/(m·K)

Show Material materials with Thermal conductivity of 193 W/(m·K)

H26

EN 573-3, EN 485

Strip, Sheet, Plate

Electrical

PropertyValueConditionRelated StandardsShape

Electrical conductivity

23000000.0 - 26000000.0 S/m

Show Material materials with Electrical conductivity of 23000000.0 - 26000000.0 S/m

H26

EN 573-3, EN 485

Strip, Sheet, Plate

29000000.0 S/m

Show Material materials with Electrical conductivity of 29000000.0 S/m

H26

EN 573-3, EN 485

Strip, Sheet, Plate

Electrical resistivity

3.45e-08 Ω·m

Show Material materials with Electrical resistivity of 3.45e-08 Ω·m

H26

EN 573-3, EN 485

Strip, Sheet, Plate

3.85e-08 - 4.35e-08 Ω·m

Show Material materials with Electrical resistivity of 3.85e-08 - 4.35e-08 Ω·m

H26

EN 573-3, EN 485

Strip, Sheet, Plate

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.1 %

Show Material materials with Chromium of 0.1 %

H26

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Copper

0.2 %

Show Material materials with Copper of 0.2 %

H26

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Iron

0.7 %

Show Material materials with Iron of 0.7 %

H26

EN 573-3

Flat

0.70 %

Show Material materials with Iron of 0.70 %

H26

EN 573-3, EN 485

Strip, Sheet, Plate

Magnesium

1.1 - 1.8 %

Show Material materials with Magnesium of 1.1 - 1.8 %

H26

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Manganese

0.1 %

Show Material materials with Manganese of 0.1 %

H26

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

0.3 %

Show Material materials with Manganese of 0.3 %

H26

EN 573-3

Flat

Silicon

0.4 %

Show Material materials with Silicon of 0.4 %

H26

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Zinc

0.25 %

Show Material materials with Zinc of 0.25 %

H26

EN 573-3, EN 485

Flat, Strip, Sheet, Plate

Technological properties

Property
Workability

Good workability.