DIN 1725-1 Grade 3.0915 H14

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlFeSi is alloyed for increasing the strength increase with Fe and Si. The material belongs to the nature-hard aluminum materials. A strength increase can be achieved only by cold forming. The alloy AlFeSi is very well cold and warm formable and has a good thermal and relatively good electrical conductivity. The material is particularly suitable for deep-drawing. It is well solderable. The material is to be oxidized well anodically, i.e. a shining clean surface develops. It is standardised as sheet metal or strip (DIN 1788 and DIN 1745). Application: for screw-type caps, for menu bowls, for light containers, bottle caps, cover containers and other form packing, for metal goods, like trim, decorated tiles, flexible pipes, various deep-drawing products, for heat exchangers and radiator fins

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.71 g/cm³ Show Material materials with Density of 2.71 g/cm³	H14	EN 573-3, EN 485, EN 541, EN 683
	20.0 °C	2.71 g/cm³ Show Material materials with Density of 2.71 g/cm³	H14	DIN 1725-1, EN 573-3, EN 573-4	Flat

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elastic modulus		70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa	H14	EN 573-3, EN 485, EN 541, EN 683
Elongation		1.0 % Show Material materials with Elongation of 1.0 %	H14	EN 573-3, EN 683		A50
		2.0 % Show Material materials with Elongation of 2.0 %	H14	EN 573-3, EN 485, EN 541		A50
		3.0 % Show Material materials with Elongation of 3.0 %	H14	EN 573-3, EN 485		A50
		4.0 % Show Material materials with Elongation of 4.0 %	H14	EN 573-3, EN 485		A50
		5.0 % Show Material materials with Elongation of 5.0 %	H14	EN 573-3, EN 485		A50
	20.0 °C	3.0 % Show Material materials with Elongation of 3.0 %	H14	DIN 1725-1, EN 573-3, EN 573-4	Flat	A10
	20.0 °C	4.0 % Show Material materials with Elongation of 4.0 %	H14	DIN 1725-1, EN 573-3, EN 573-4	Flat	A10
	20.0 °C	5.0 % Show Material materials with Elongation of 5.0 %	H14	DIN 1725-1, EN 573-3, EN 573-4	Flat
Hardness, Brinell		41.0 [-] Show Material materials with Hardness, Brinell of 41.0 [-]	H14	EN 573-3, EN 485
	20.0 °C	40.0 [-] Show Material materials with Hardness, Brinell of 40.0 [-]	H14	DIN 1725-1, EN 573-3, EN 573-4	Flat
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 8000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 8000 Series Aluminium
Tensile strength		120.0 - 170.0 MPa Show Material materials with Tensile strength of 120.0 - 170.0 MPa	H14	EN 573-3, EN 683
		125.0 - 165.0 MPa Show Material materials with Tensile strength of 125.0 - 165.0 MPa	H14	EN 573-3, EN 485, EN 541
	20.0 °C	130.0 - 170.0 MPa Show Material materials with Tensile strength of 130.0 - 170.0 MPa	H14	DIN 1725-1, EN 573-3, EN 573-4	Flat

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	20 °C	2.35e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.35e-05 1/K	H14	EN 573-3, EN 485, EN 541, EN 683
	100 °C	2.35e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.35e-05 1/K	H14	EN 573-3, EN 485, EN 541, EN 683
Melting point		640.0 - 655.0 °C Show Material materials with Melting point of 640.0 - 655.0 °C	H14	EN 573-3, EN 485, EN 541, EN 683
Specific heat capacity		920.0 J/(kg·K) Show Material materials with Specific heat capacity of 920.0 J/(kg·K)				Typical for Wrought 8000 Series Aluminium
Thermal conductivity	20.0 °C	210.0 - 220.0 W/(m·K) Show Material materials with Thermal conductivity of 210.0 - 220.0 W/(m·K)	H14	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 541, EN 683	Flat

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity	20.0 °C	34000000.0 - 35000000.0 S/m Show Material materials with Electrical conductivity of 34000000.0 - 35000000.0 S/m	H14	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 541, EN 683	Flat
Electrical resistivity		2.86e-08 - 2.94e-08 Ω·m Show Material materials with Electrical resistivity of 2.86e-08 - 2.94e-08 Ω·m	H14	EN 573-3, EN 485, EN 541, EN 683

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.1 % Show Material materials with Chromium of 0.1 %	H14	EN 573-3, EN 485, EN 541, EN 683
Copper	0.1 % Show Material materials with Copper of 0.1 %	H14	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 541, EN 683	Flat
Iron	0.5 - 1.0 % Show Material materials with Iron of 0.5 - 1.0 %	H14	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 541, EN 683	Flat
Magnesium	0.1 % Show Material materials with Magnesium of 0.1 %	H14	EN 573-3, EN 485, EN 541, EN 683
Manganese	0.1 % Show Material materials with Manganese of 0.1 %	H14	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 541, EN 683	Flat
Silicon	0.4 - 0.8 % Show Material materials with Silicon of 0.4 - 0.8 %	H14	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 541, EN 683	Flat
Titanium	0.05 Show Material materials with Titanium of 0.05	H14	DIN 1725-1, EN 573-3, EN 573-4	Flat
Zinc	0.1 % Show Material materials with Zinc of 0.1 %	H14	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 541, EN 683	Flat