DIN 1725-1 Grade 3.0525 H28

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMn1Mg0,5 is similarly to AlMn1 in its properties. It reaches strength up to F 25. The alloy belongs to the nature-hard aluminum materials. A strength increase can only occure by cold forming. It is very well hot and cold formable and is suitable to the deep-drawing (no lappet formation). The alloy AlMn1Mg0,5 is very well corrosion resistant and is sea water steady. As semi-finished material it is present in accordance with DIN 1788 and DIN 1745 only as sheet metal or strip. Application: Mainly in the packing for cans (lower parts), for menu bowls, for covers. In the building industry for claddings, roofings, for sun protection facilities (roller schutter, lamella net curtain) and for roll gates as well as for flexible pipes and in the construction of vehicles.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.72 g/cm³ Show Material materials with Density of 2.72 g/cm³	H28	EN 573-3, EN 1592, EN 485, EN 541
	20.0 °C	2.72 g/cm³ Show Material materials with Density of 2.72 g/cm³	H28	DIN 1725-1, EN 573-3, EN 573-4	Flat

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending angle 90°		1.5 °/t Show Material materials with Bending angle 90° of 1.5 °/t	H28	EN 573-3, EN 485
		2.5 °/t Show Material materials with Bending angle 90° of 2.5 °/t	H28	EN 573-3, EN 485
Elastic modulus		70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa	H28	EN 573-3, EN 1592, EN 485, EN 541
	20.0 °C	65.0 GPa Show Material materials with Elastic modulus of 65.0 GPa	H28	DIN 1725-1, EN 573-3, EN 573-4	Flat
Hardness, Brinell		68.0 [-] Show Material materials with Hardness, Brinell of 68.0 [-]	H28	EN 573-3, EN 485
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 3000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 3000 Series Aluminium
Shear modulus	20.0 °C	26.5 Show Material materials with Shear modulus of 26.5	H28	DIN 1725-1, EN 573-3, EN 573-4	Flat
Tensile strength		210.0 - 250.0 MPa Show Material materials with Tensile strength of 210.0 - 250.0 MPa	H28	EN 573-3, EN 541
		220.0 MPa Show Material materials with Tensile strength of 220.0 MPa	H28	EN 573-3, EN 1592, EN 485
	20.0 °C	145.0 - 205.0 MPa Show Material materials with Tensile strength of 145.0 - 205.0 MPa	H28	DIN 1725-1, EN 573-3, EN 573-4	Flat
	20.0 °C	205.0 - 245.0 MPa Show Material materials with Tensile strength of 205.0 - 245.0 MPa	H28	DIN 1725-1, EN 573-3, EN 573-4	Flat

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape
Coefficient of thermal expansion	20 °C	2.3199999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K	H28	EN 573-3, EN 1592, EN 485, EN 541
	100 °C	2.3199999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K	H28	EN 573-3, EN 1592, EN 485, EN 541
Melting point		630.0 - 654.0 °C Show Material materials with Melting point of 630.0 - 654.0 °C	H28	EN 573-3, EN 1592, EN 485, EN 541
Specific heat capacity	20.0 °C	893.0 J/(kg·K) Show Material materials with Specific heat capacity of 893.0 J/(kg·K)	H28	DIN 1725-1, EN 573-3, EN 573-4	Flat
Thermal conductivity		160.0 - 190.0 W/(m·K) Show Material materials with Thermal conductivity of 160.0 - 190.0 W/(m·K)	H28	EN 573-3, EN 1592, EN 485, EN 541
	20.0 °C	200.0 W/(m·K) Show Material materials with Thermal conductivity of 200.0 W/(m·K)	H28	DIN 1725-1, EN 573-3, EN 573-4	Flat

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity		23000000.0 - 25000000.0 S/m Show Material materials with Electrical conductivity of 23000000.0 - 25000000.0 S/m	H28	EN 573-3, EN 1592, EN 485, EN 541
	20.0 °C	28000000.0 S/m Show Material materials with Electrical conductivity of 28000000.0 S/m	H28	DIN 1725-1, EN 573-3, EN 573-4	Flat
Electrical resistivity		4e-08 - 4.35e-08 Ω·m Show Material materials with Electrical resistivity of 4e-08 - 4.35e-08 Ω·m	H28	EN 573-3, EN 1592, EN 485, EN 541

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.1 % Show Material materials with Chromium of 0.1 %	H28	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat
Copper	0.3 % Show Material materials with Copper of 0.3 %	H28	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat
Iron	0.7 % Show Material materials with Iron of 0.7 %	H28	DIN 1725-1, EN 573-3, EN 573-4	Flat
	0.70 % Show Material materials with Iron of 0.70 %	H28	EN 573-3, EN 1592, EN 485, EN 541
Magnesium	0.2 - 0.6 % Show Material materials with Magnesium of 0.2 - 0.6 %	H28	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat
Manganese	1.0 - 1.5 % Show Material materials with Manganese of 1.0 - 1.5 %	H28	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat
Silicon	0.6 % Show Material materials with Silicon of 0.6 %	H28	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat
Titanium	0.1 % Show Material materials with Titanium of 0.1 %	H28	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat
Zinc	0.25 % Show Material materials with Zinc of 0.25 %	H28	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat

Technological properties

Property

Anodizing

decorative: sufficient, Protective: very good

Corrosion properties

Seawater: very good, weathering: very good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12)