DIN 1725-1 Grade 3.0526 H24

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMn1Mg1 has similar properties like AlMn1, however it reaches higher strength (to F 26). It has also relatively high strength in the soft condition, but it is well cold fomrable. The alloy belongs to the nature-hard aluminum materials. A strength increase can be achieved, not by a purposeful heat treatment only by cold forming. It is very well warm and cold transformable and is suitable to the deep-drawing (no lappet formation). The alloy is very corrosion and sea water-steadily. The main field of application, the packing, determines the kind of semi-finished material standardized according to DIN 1788 and DIN 1745 (sheet metal and strip). Application: In the packing (DIN 59606) for cans (dose lower parts, abgestreckte doses), breaking covers and catches of all kinds. In the building industry for roofings (usually profile boards), claddings as well as for roll shutter and roll gates.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.72 g/cm³ Show Material materials with Density of 2.72 g/cm³	H24	EN 573-3, EN 1592, EN 485, EN 541
	20.0 °C	2.72 g/cm³ Show Material materials with Density of 2.72 g/cm³	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending angle 180°		2.0 °/t Show Material materials with Bending angle 180° of 2.0 °/t	H24	EN 573-3, EN 485
Bending angle 90°		0.5 °/t Show Material materials with Bending angle 90° of 0.5 °/t	H24	EN 573-3, EN 485
		1.0 °/t Show Material materials with Bending angle 90° of 1.0 °/t	H24	EN 573-3, EN 485
		1.5 °/t Show Material materials with Bending angle 90° of 1.5 °/t	H24	EN 573-3, EN 485
Elastic modulus		69.0 GPa Show Material materials with Elastic modulus of 69.0 GPa	H24	EN 573-3, EN 1592, EN 485, EN 541
		70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa	H24	EN 573-3, EN 1592, EN 485, EN 541
	20.0 °C	65.0 - 71.0 GPa Show Material materials with Elastic modulus of 65.0 - 71.0 GPa	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Elongation		3.0 % Show Material materials with Elongation of 3.0 %	H24	EN 573-3, EN 485		A50
		4.0 % Show Material materials with Elongation of 4.0 %	H24	EN 573-3, EN 485, EN 541		A50
		6.0 % Show Material materials with Elongation of 6.0 %	H24	EN 573-3, EN 1592		A100
	20.0 °C	5.0 % Show Material materials with Elongation of 5.0 %	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat	A10
	20.0 °C	6.0 % Show Material materials with Elongation of 6.0 %	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Hardness, Brinell		66.0 [-] Show Material materials with Hardness, Brinell of 66.0 [-]	H24	EN 573-3, EN 485
	20.0 °C	65.0 [-] Show Material materials with Hardness, Brinell of 65.0 [-]	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 3000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 3000 Series Aluminium
Shear modulus	20.0 °C	25.0 - 27.0 GPa Show Material materials with Shear modulus of 25.0 - 27.0 GPa	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Tensile strength		220.0 MPa Show Material materials with Tensile strength of 220.0 MPa	H24	EN 573-3, EN 1592
		220.0 - 265.0 MPa Show Material materials with Tensile strength of 220.0 - 265.0 MPa	H24	EN 573-3, EN 485
		225.0 - 265.0 MPa Show Material materials with Tensile strength of 225.0 - 265.0 MPa	H24	EN 573-3, EN 541
	20.0 °C	220.0 - 260.0 MPa Show Material materials with Tensile strength of 220.0 - 260.0 MPa	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape
Coefficient of thermal expansion	-50 °C	2.1499999999999997e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.1499999999999997e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541
	-50.0 °C	2.15e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.15e-05 1/K	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
	20 °C	2.1499999999999997e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.1499999999999997e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541
	20 °C	2.3199999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541
	20 °C	2.3899999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3899999999999998e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541
	20 °C	2.41e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.41e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541, DIN 1725-1, EN 573-4	Flat
	20 °C	2.51e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.51e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541, DIN 1725-1, EN 573-4	Flat
	100 °C	2.3199999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3199999999999998e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541
	100.0 °C	2.32e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.32e-05 1/K	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
	100 °C	2.3899999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3899999999999998e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541
	200 °C	2.41e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.41e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541, DIN 1725-1, EN 573-4	Flat
	200.0 °C	2.41e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.41e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541, DIN 1725-1, EN 573-4	Flat
	300 °C	2.51e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.51e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541, DIN 1725-1, EN 573-4	Flat
	300.0 °C	2.51e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.51e-05 1/K	H24	EN 573-3, EN 1592, EN 485, EN 541, DIN 1725-1, EN 573-4	Flat
Melting point		629.0 - 654.0 °C Show Material materials with Melting point of 629.0 - 654.0 °C	H24	EN 573-3, EN 1592, EN 485, EN 541
		630.0 - 655.0 °C Show Material materials with Melting point of 630.0 - 655.0 °C	H24	EN 573-3, EN 1592, EN 485, EN 541
Specific heat capacity		893.0 J/(kg·K) Show Material materials with Specific heat capacity of 893.0 J/(kg·K)	H24	EN 573-3, EN 1592, EN 485, EN 541
	20.0 °C	893.0 J/(kg·K) Show Material materials with Specific heat capacity of 893.0 J/(kg·K)	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Thermal conductivity		160.0 - 180.0 W/(m·K) Show Material materials with Thermal conductivity of 160.0 - 180.0 W/(m·K)	H24	EN 573-3, EN 1592, EN 485, EN 541
		163 W/(m·K) Show Material materials with Thermal conductivity of 163 W/(m·K)	H24	EN 573-3, EN 1592, EN 485, EN 541
	20.0 °C	160.0 - 190.0 W/(m·K) Show Material materials with Thermal conductivity of 160.0 - 190.0 W/(m·K)	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity		23000000.0 - 25000000.0 S/m Show Material materials with Electrical conductivity of 23000000.0 - 25000000.0 S/m	H24	EN 573-3, EN 1592, EN 485, EN 541
		24000000.0 S/m Show Material materials with Electrical conductivity of 24000000.0 S/m	H24	EN 573-3, EN 1592, EN 485, EN 541
	20.0 °C	20000000.0 - 24000000.0 S/m Show Material materials with Electrical conductivity of 20000000.0 - 24000000.0 S/m	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Electrical resistivity		4e-08 - 4.35e-08 Ω·m Show Material materials with Electrical resistivity of 4e-08 - 4.35e-08 Ω·m	H24	EN 573-3, EN 1592, EN 485, EN 541
		4.17e-08 Ω·m Show Material materials with Electrical resistivity of 4.17e-08 Ω·m	H24	EN 573-3, EN 1592, EN 485, EN 541

Chemical properties

Property	Value	Condition	Related Standards	Shape
Copper	0.25 % Show Material materials with Copper of 0.25 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat
Iron	0.7 % Show Material materials with Iron of 0.7 %	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
	0.70 % Show Material materials with Iron of 0.70 %	H24	EN 573-3, EN 1592, EN 485, EN 541
Magnesium	0.8 - 1.3 % Show Material materials with Magnesium of 0.8 - 1.3 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat
Manganese	1.0 - 1.5 % Show Material materials with Manganese of 1.0 - 1.5 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat
Silicon	0.3 % Show Material materials with Silicon of 0.3 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat
Zinc	0.25 % Show Material materials with Zinc of 0.25 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485, EN 541	Flat

Technological properties

Property

Anodizing

decorative: sufficient, Protective: very good

Corrosion properties

Seawater: very good, weathering: very good

Workability

Bending / Spinning (cold): very good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (H14) / acceptable (H12)