DIN 1725-1 Grade 3.3316 H24

Want to keep this datasheet? Save it now in your required format

Description

The alloys are characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. It is well polishable and anodisable. The splinter-giving machinability becomes better with increasing Mg content, just as the weldability. From the AlMg alloys the mark AlMg1,5 has to exhibit only relatively small mechanical properties. Standardised semi-finished material only for sheet metal and strips with thickness: > 0.35 mm in accordance to DIN 1745. Application: The main application lies in the building industry. In the building industry for lamella net curtains, rolling shutter, roll gates, in food industry (including table-ware) and for transport containers.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.68 g/cm³ Show Material materials with Density of 2.68 g/cm³	H24	EN 573-3, EN 485
		2.69 g/cm³ Show Material materials with Density of 2.69 g/cm³	H24	EN 573-3, EN 485
	20.0 °C	2.69 g/cm³ Show Material materials with Density of 2.69 g/cm³	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending angle 180°		1.5 °/t Show Material materials with Bending angle 180° of 1.5 °/t	H24	EN 573-3, EN 485
		2.0 °/t Show Material materials with Bending angle 180° of 2.0 °/t	H24	EN 573-3, EN 485
Bending angle 90°		0.5 °/t Show Material materials with Bending angle 90° of 0.5 °/t	H24	EN 573-3, EN 485
		1.0 °/t Show Material materials with Bending angle 90° of 1.0 °/t	H24	EN 573-3, EN 485
		1.5 °/t Show Material materials with Bending angle 90° of 1.5 °/t	H24	EN 573-3, EN 485
		2.0 °/t Show Material materials with Bending angle 90° of 2.0 °/t	H24	EN 573-3, EN 485
Elastic modulus		69.0 GPa Show Material materials with Elastic modulus of 69.0 GPa	H24	EN 573-3, EN 485
		70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa	H24	EN 573-3, EN 485
	20.0 °C	70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Elongation		3.0 % Show Material materials with Elongation of 3.0 %	H24	EN 573-3, EN 485		A50
		4.0 % Show Material materials with Elongation of 4.0 %	H24	EN 573-3, EN 485		A50
		5.0 % Show Material materials with Elongation of 5.0 %	H24	EN 573-3, EN 485		A50
		8.0 % Show Material materials with Elongation of 8.0 %	H24	EN 573-3, EN 485		A50
	20.0 °C	8.0 % Show Material materials with Elongation of 8.0 %	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat	A10
	20.0 °C	10.0 % Show Material materials with Elongation of 10.0 %	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Hardness, Brinell		54.0 [-] Show Material materials with Hardness, Brinell of 54.0 [-]	H24	EN 573-3, EN 485
	20.0 °C	55.0 [-] Show Material materials with Hardness, Brinell of 55.0 [-]	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Shear modulus	20.0 °C	26.5 Show Material materials with Shear modulus of 26.5	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Tensile strength	20.0 °C	175.0 - 215.0 MPa Show Material materials with Tensile strength of 175.0 - 215.0 MPa	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	20 °C	2.38e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.38e-05 1/K	H24	EN 573-3, EN 485
	100 °C	2.38e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.38e-05 1/K	H24	EN 573-3, EN 485
Max service temperature		150.0 °C Show Material materials with Max service temperature of 150.0 °C				Typical for Wrought 5000 Series Aluminium
Melting point		620.0 - 650.0 °C Show Material materials with Melting point of 620.0 - 650.0 °C	H24	EN 573-3, EN 485
		625.0 - 650.0 °C Show Material materials with Melting point of 625.0 - 650.0 °C	H24	EN 573-3, EN 485
Specific heat capacity		879.0 - 963.0 J/(kg·K) Show Material materials with Specific heat capacity of 879.0 - 963.0 J/(kg·K)				Typical for Wrought 5000 Series Aluminium
Thermal conductivity		170.0 - 190.0 W/(m·K) Show Material materials with Thermal conductivity of 170.0 - 190.0 W/(m·K)	H24	EN 573-3, EN 485
		193 W/(m·K) Show Material materials with Thermal conductivity of 193 W/(m·K)	H24	EN 573-3, EN 485
	20.0 °C	160.0 - 200.0 W/(m·K) Show Material materials with Thermal conductivity of 160.0 - 200.0 W/(m·K)	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity		23000000.0 - 26000000.0 S/m Show Material materials with Electrical conductivity of 23000000.0 - 26000000.0 S/m	H24	EN 573-3, EN 485
		29000000.0 S/m Show Material materials with Electrical conductivity of 29000000.0 S/m	H24	EN 573-3, EN 485
	20.0 °C	28000000.0 - 30000000.0 S/m Show Material materials with Electrical conductivity of 28000000.0 - 30000000.0 S/m	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Electrical resistivity		3.45e-08 Ω·m Show Material materials with Electrical resistivity of 3.45e-08 Ω·m	H24	EN 573-3, EN 485
		3.85e-08 - 4.35e-08 Ω·m Show Material materials with Electrical resistivity of 3.85e-08 - 4.35e-08 Ω·m	H24	EN 573-3, EN 485

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.1 % Show Material materials with Chromium of 0.1 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Copper	0.05 % Show Material materials with Copper of 0.05 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Iron	0.45 % Show Material materials with Iron of 0.45 %	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
	0.45 % Show Material materials with Iron of 0.45 %	H24	EN 573-3, EN 485
Magnesium	1.1 - 1.7 % Show Material materials with Magnesium of 1.1 - 1.7 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Manganese	0.15 % Show Material materials with Manganese of 0.15 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Silicon	0.4 % Show Material materials with Silicon of 0.4 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Zinc	0.2 % Show Material materials with Zinc of 0.2 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat

Technological properties

Property

Workability

Good workability.