Properties
General
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Density | 2.68 g/cm³ Show Material materials with Density of 2.68 g/cm³ | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Mechanical
| Property | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|
Bending angle 180° | 0.5 °/t Show Material materials with Bending angle 180° of 0.5 °/t | H111 | EN 573-3, EN 485 | |
Bending angle 90° | 0.5 °/t Show Material materials with Bending angle 90° of 0.5 °/t | H111 | EN 573-3, EN 485 | |
1.0 °/t Show Material materials with Bending angle 90° of 1.0 °/t | H111 | EN 573-3, EN 485 | ||
2.0 °/t Show Material materials with Bending angle 90° of 2.0 °/t | H111 | EN 573-3, EN 485 | ||
Elastic modulus | 70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
Hardness, Brinell | 46.0 [-] Show Material materials with Hardness, Brinell of 46.0 [-] | H111 | EN 573-3, EN 485 | |
47.0 [-] Show Material materials with Hardness, Brinell of 47.0 [-] | H111 | EN 573-3, EN 485 | ||
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 5000 Series Aluminium | ||
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] | Typical for Wrought 5000 Series Aluminium | ||
Shear modulus | 26.3 GPa Show Material materials with Shear modulus of 26.3 GPa | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
Tensile strength | 165.0 - 215.0 MPa Show Material materials with Tensile strength of 165.0 - 215.0 MPa | H111 | EN 573-3, EN 485 | |
170.0 - 215.0 MPa Show Material materials with Tensile strength of 170.0 - 215.0 MPa | H111 | EN 573-3, EN 485 | ||
170.0 - 230.0 MPa Show Material materials with Tensile strength of 170.0 - 230.0 MPa | H111 | EN 573-3, EN 754, EN 755 |
Thermal
| Property | Temperature | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.2100000000000002e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.2100000000000002e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
20 °C | 2.2100000000000002e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.2100000000000002e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | ||
20 °C | 2.38e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.38e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | ||
20 °C | 2.48e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.48e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | ||
20 °C | 2.5699999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.5699999999999998e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | ||
100 °C | 2.38e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.38e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | ||
200 °C | 2.48e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.48e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | ||
300 °C | 2.5699999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.5699999999999998e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | ||
Max service temperature | 150.0 °C Show Material materials with Max service temperature of 150.0 °C | Typical for Wrought 5000 Series Aluminium | |||
Melting point | 605.0 - 650.0 °C Show Material materials with Melting point of 605.0 - 650.0 °C | H111 | EN 573-3, EN 485, EN 754, EN 755 | ||
607.0 - 649.0 °C Show Material materials with Melting point of 607.0 - 649.0 °C | H111 | EN 573-3, EN 485, EN 754, EN 755 | |||
Specific heat capacity | 900.0 J/(kg·K) Show Material materials with Specific heat capacity of 900.0 J/(kg·K) | H111 | EN 573-3, EN 485, EN 754, EN 755 | ||
Thermal conductivity | 130.0 - 150.0 W/(m·K) Show Material materials with Thermal conductivity of 130.0 - 150.0 W/(m·K) | H111 | EN 573-3, EN 485, EN 754, EN 755 | ||
138 W/(m·K) Show Material materials with Thermal conductivity of 138 W/(m·K) | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Electrical
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Electrical conductivity | 19000000.0 - 21000000.0 S/m Show Material materials with Electrical conductivity of 19000000.0 - 21000000.0 S/m | H111 | EN 573-3, EN 485, EN 754, EN 755 |
20000000.0 S/m Show Material materials with Electrical conductivity of 20000000.0 S/m | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
Electrical resistivity | 4.76e-08 - 5.26e-08 Ω·m Show Material materials with Electrical resistivity of 4.76e-08 - 5.26e-08 Ω·m | H111 | EN 573-3, EN 485, EN 754, EN 755 |
5e-08 Ω·m Show Material materials with Electrical resistivity of 5e-08 Ω·m | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Chemical properties
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Chromium | 0.15 - 0.35 % Show Material materials with Chromium of 0.15 - 0.35 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Copper | 0.1 % Show Material materials with Copper of 0.1 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Iron | 0.40 % Show Material materials with Iron of 0.40 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Magnesium | 2.2 - 2.8 % Show Material materials with Magnesium of 2.2 - 2.8 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Manganese | 0.1 % Show Material materials with Manganese of 0.1 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Silicon | 0.25 % Show Material materials with Silicon of 0.25 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Zinc | 0.1 % Show Material materials with Zinc of 0.1 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: good, Protective: very good | |
| Corrosion properties | Seawater: very good to good, weathering: good | |
| Workability | Bending / Spinning (cold): very good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) good (O) / good (H12) | |