You are not signed in

Categories
Biological Material
Wood
Ceramic
Carbon
Engineering Ceramic
Natural Ceramic
Composite
Ceramic Matrix Composite
Metal Matrix Composite
Polymer Matrix Composite
Glass
Glass Ceramic
Lead Glass
Silicate Glass
Polymer
Elastomer
Thermoplastic
Thermosetting
Metal
Aluminium
Clad / Bimetal
Cobalt
Copper
Iron
Magnesium
Manganese
Nickel
Noble Metal
Other Metal
Refractory Metal
Steel
Titanium
Find Metal Suppliers
List Your Company
List Your Materials
Matmatch Partners
Resources
Advertise
Media Kit (Advertising)
Case Studies
AMPCO METAL
Deutsche Edelstahlwerke
Phon Technew
CERATIZITnew
Tools
Unit Converter
Hardness Converter
Advanced Search
Application Search
About us

EN 573-3 Grade 3.3547 O

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMg4,5Mn belongs to the nature-hard aluminum wrought materials, so a strength increase can be achieved only by cold forming, not by a purposeful heat treatment. The material is characterised by good corrosion resistance. It is sea water steady and steady against saline atmosphere. Increasing Mg+Mn content makes the extrusion more difficult, but strength and very low-temperature behaviour improve. The alloy is well weldable. Even in the welding seams strength lie within the range of AlMg5. The alloy AlMg4Mn is standardised as semi-finished material only as sheet metal or strips, thickness: >= 0,35 mm (DIN 1745). Application: rolling shutter and roll gates (sheet metal profiles), in the apparatus engineering for tank bottoms, very low-temperature tanks, heat exchangers and pipings. In the construction of vehicles for superstructures as well as tank and silo trucks, dump truck hollows, buses, bumpers, car body and safety-related parts. In shipbuilding for trunk, superstructures, sail masts and radar equipment

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Suppliers with similar grades

GLEICH

MANUFACTURER AND DISTRIBUTOR

BIKAR-METALLE GMBH

MANUFACTURER AND DISTRIBUTOR

Information and services

Additional services:

Cuttings, Parts from drawings

ALUDIUM

MANUFACTURER

Information and services

Quantity:

One truck load – Specialty products on request.

Additional services:

Via Cindal (the Aludium R&D department): R&D services, benchmarking, chemical audits, material specification, process optimisation, quality monitoring, sample analysis, prototyping, training

There are 8 other suppliers for this grade.

Preview all suppliers

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.66 g/cm³ Show Material materials with Density of 2.66 g/cm³	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755
	20.0 °C	2.66 g/cm³ Show Material materials with Density of 2.66 g/cm³	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending Fatigue Strength		125.0 MPa Show Material materials with Bending Fatigue Strength of 125.0 MPa	O	EN 573-3, EN 1592, EN 485, EN 754, EN 755
Bending angle 180°		1.0 °/t Show Material materials with Bending angle 180° of 1.0 °/t	O	EN 573-3, EN 485
		1.5 °/t Show Material materials with Bending angle 180° of 1.5 °/t	O	EN 573-3, EN 14286, EN 485
		4.0 °/t Show Material materials with Bending angle 180° of 4.0 °/t	O	EN 573-3, EN 14286
Bending angle 90°		0.5 °/t Show Material materials with Bending angle 90° of 0.5 °/t	O	EN 573-3, EN 485
		1.0 °/t Show Material materials with Bending angle 90° of 1.0 °/t	O	EN 573-3, EN 485
		1.5 °/t Show Material materials with Bending angle 90° of 1.5 °/t	O	EN 573-3, EN 485
		2.5 °/t Show Material materials with Bending angle 90° of 2.5 °/t	O	EN 573-3, EN 485
Elastic modulus		71.0 GPa Show Material materials with Elastic modulus of 71.0 GPa	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755
	20.0 °C	72.0 GPa Show Material materials with Elastic modulus of 72.0 GPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
Elongation		9.0 % Show Material materials with Elongation of 9.0 %	O	EN 573-3, EN 485		A100
		10.0 % Show Material materials with Elongation of 10.0 %	O	EN 573-3, EN 485		A100
		10.0 % Show Material materials with Elongation of 10.0 %	O	EN 573-3, EN 755		A50
		11.0 % Show Material materials with Elongation of 11.0 %	O	EN 573-3, EN 485		A50
		12.0 % Show Material materials with Elongation of 12.0 %	O	EN 573-3, EN 485, EN 755		A100
		12.0 % Show Material materials with Elongation of 12.0 %	O	EN 573-3, EN 485		A50
		13.0 % Show Material materials with Elongation of 13.0 %	O	EN 573-3, EN 485		A50
		14.0 % Show Material materials with Elongation of 14.0 %	O	EN 573-3, EN 485		A100
		14.0 % Show Material materials with Elongation of 14.0 %	O	EN 573-3, EN 754		A50
		15.0 % Show Material materials with Elongation of 15.0 %	O	EN 573-3, EN 485		A100
		15.0 % Show Material materials with Elongation of 15.0 %	O	EN 573-3, EN 485		A50
		16.0 % Show Material materials with Elongation of 16.0 %	O	EN 573-3, EN 1592, EN 754		A100
		16.0 % Show Material materials with Elongation of 16.0 %	O	EN 573-3, EN 485		A50
		17.0 % Show Material materials with Elongation of 17.0 %	O	EN 573-3, EN 14286		A100
	20.0 °C	10.0 % Show Material materials with Elongation of 10.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Rod	A10
	20.0 °C	12.0 % Show Material materials with Elongation of 12.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Rod
	20.0 °C	12.0 % Show Material materials with Elongation of 12.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Tube	A10
	20.0 °C	14.0 % Show Material materials with Elongation of 14.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Tube, Sheet
	20.0 °C	15.0 % Show Material materials with Elongation of 15.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Sheet, Strip	A10
	20.0 °C	17.0 % Show Material materials with Elongation of 17.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Sheet, Strip
	20.0 °C	20.0 % Show Material materials with Elongation of 20.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	100.0 °C	26.0 % Show Material materials with Elongation of 26.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	180.0 °C	43.0 % Show Material materials with Elongation of 43.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	240.0 °C	48.0 % Show Material materials with Elongation of 48.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	300.0 °C	67.0 % Show Material materials with Elongation of 67.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
Hardness, Brinell		69.0 [-] Show Material materials with Hardness, Brinell of 69.0 [-]	O	EN 573-3, EN 485
		70.0 [-] Show Material materials with Hardness, Brinell of 70.0 [-]	O	EN 573-3, EN 485
		73.0 [-] Show Material materials with Hardness, Brinell of 73.0 [-]	O	EN 573-3, EN 485
		75.0 [-] Show Material materials with Hardness, Brinell of 75.0 [-]	O	EN 573-3, EN 485
	20.0 °C	60.0 [-] Show Material materials with Hardness, Brinell of 60.0 [-]	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Rod, Tube
	20.0 °C	70.0 [-] Show Material materials with Hardness, Brinell of 70.0 [-]	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Sheet, Strip
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Reduction of area	20.0 °C	15.0 % Show Material materials with Reduction of area of 15.0 %	O	DIN 1725-1	Sheet
Shear modulus		26.8 GPa Show Material materials with Shear modulus of 26.8 GPa	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755
	20.0 °C	27.0 GPa Show Material materials with Shear modulus of 27.0 GPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
Tensile strength	-193.0 °C	495.0 MPa Show Material materials with Tensile strength of 495.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	-150.0 °C	415.0 MPa Show Material materials with Tensile strength of 415.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	-105.0 °C	370.0 MPa Show Material materials with Tensile strength of 370.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	-60.0 °C	355.0 MPa Show Material materials with Tensile strength of 355.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	-15.0 °C	350.0 MPa Show Material materials with Tensile strength of 350.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
		245.0 MPa Show Material materials with Tensile strength of 245.0 MPa	O	EN 573-3, EN 485
		250.0 MPa Show Material materials with Tensile strength of 250.0 MPa	O	EN 573-3, EN 485
		255.0 MPa Show Material materials with Tensile strength of 255.0 MPa	O	EN 573-3, EN 485
		260.0 MPa Show Material materials with Tensile strength of 260.0 MPa	O	EN 573-3, EN 485
		270.0 - 345.0 MPa Show Material materials with Tensile strength of 270.0 - 345.0 MPa	O	EN 573-3, EN 485
		270.0 - 350.0 MPa Show Material materials with Tensile strength of 270.0 - 350.0 MPa	O	EN 573-3, EN 754
		270.0 MPa Show Material materials with Tensile strength of 270.0 MPa	O	EN 573-3, EN 755
		275.0 MPa Show Material materials with Tensile strength of 275.0 MPa	O	EN 573-3, EN 1592
		290.0 - 370.0 MPa Show Material materials with Tensile strength of 290.0 - 370.0 MPa	O	EN 573-3, EN 14286
	20.0 °C	260.0 MPa Show Material materials with Tensile strength of 260.0 MPa	O	DIN 1725-1	Sheet
	20.0 °C	270.0 MPa Show Material materials with Tensile strength of 270.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Rod, Tube
	20.0 °C	275.0 - 350.0 MPa Show Material materials with Tensile strength of 275.0 - 350.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255, EN 485	Sheet, Strip
	20.0 °C	321.0 MPa Show Material materials with Tensile strength of 321.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	20.0 °C	350.0 MPa Show Material materials with Tensile strength of 350.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	100.0 °C	302.0 MPa Show Material materials with Tensile strength of 302.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	180.0 °C	209.0 MPa Show Material materials with Tensile strength of 209.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	240.0 °C	168.0 MPa Show Material materials with Tensile strength of 168.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255
	300.0 °C	122.0 MPa Show Material materials with Tensile strength of 122.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	-50 °C	2.23e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.23e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755, DIN 1725-1, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
	-50.0 °C	2.23e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.23e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755, DIN 1725-1, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
	20 °C	2.23e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.23e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755, DIN 1725-1, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
	20 °C	2.42e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.42e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755, DIN 1725-1, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
	20 °C	2.4999999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.4999999999999998e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755
	20 °C	2.6e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.6e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755, DIN 1725-1, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
	100 °C	2.42e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.42e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755, DIN 1725-1, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
	100.0 °C	2.42e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.42e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755, DIN 1725-1, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
	200 °C	2.4999999999999998e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.4999999999999998e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755
	200.0 °C	2.5e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.5e-05 1/K	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
	300 °C	2.6e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.6e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755, DIN 1725-1, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
	300.0 °C	2.6e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.6e-05 1/K	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755, DIN 1725-1, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
Max service temperature		-195.0 - 50.0 °C Show Material materials with Max service temperature of -195.0 - 50.0 °C	O	DIN 1725-1, EN 573-3, EN 573-4	Rod, Sheet, Strip, Tube	Long
		150.0 °C Show Material materials with Max service temperature of 150.0 °C				Typical for Wrought 5000 Series Aluminium
Melting point		574.0 - 638.0 °C Show Material materials with Melting point of 574.0 - 638.0 °C	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755
Specific heat capacity		900.0 J/(kg·K) Show Material materials with Specific heat capacity of 900.0 J/(kg·K)	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755
	20.0 °C	900.0 J/(kg·K) Show Material materials with Specific heat capacity of 900.0 J/(kg·K)	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Rod, Sheet, Strip, Tube
Thermal conductivity	20.0 °C	110.0 - 140.0 W/(m·K) Show Material materials with Thermal conductivity of 110.0 - 140.0 W/(m·K)	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255, EN 14286, EN 1592, EN 485, EN 754, EN 755	Rod, Sheet, Strip, Tube

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity	20.0 °C	16000000.0 - 19000000.0 S/m Show Material materials with Electrical conductivity of 16000000.0 - 19000000.0 S/m	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255, EN 14286, EN 1592, EN 485, EN 754, EN 755	Rod, Sheet, Strip, Tube
Electrical resistivity		5.26e-08 - 6.25e-08 Ω·m Show Material materials with Electrical resistivity of 5.26e-08 - 6.25e-08 Ω·m	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.05 - 0.25 % Show Material materials with Chromium of 0.05 - 0.25 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255, EN 14286, EN 1592, EN 485, EN 754, EN 755	Sheet, Rod, Strip, Tube
Copper	0.1 % Show Material materials with Copper of 0.1 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255, EN 14286, EN 1592, EN 485, EN 754, EN 755	Sheet, Rod, Strip, Tube
Iron	0.4 % Show Material materials with Iron of 0.4 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255	Sheet, Rod, Strip, Tube
	0.40 % Show Material materials with Iron of 0.40 %	O	EN 573-3, EN 14286, EN 1592, EN 485, EN 754, EN 755
Magnesium	4.0 - 4.9 % Show Material materials with Magnesium of 4.0 - 4.9 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255, EN 14286, EN 1592, EN 485, EN 754, EN 755	Sheet, Rod, Strip, Tube
Manganese	0.3 - 1.0 % Show Material materials with Manganese of 0.3 - 1.0 %	O	DIN 1725-1	Sheet
	0.4 - 1.0 % Show Material materials with Manganese of 0.4 - 1.0 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255, EN 14286, EN 1592, EN 485, EN 754, EN 755	Rod, Sheet, Strip, Tube
Silicon	0.4 % Show Material materials with Silicon of 0.4 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255, EN 14286, EN 1592, EN 485, EN 754, EN 755	Sheet, Rod, Strip, Tube
Titanium	0.15 % Show Material materials with Titanium of 0.15 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255, EN 14286, EN 1592, EN 485, EN 754, EN 755	Sheet, Rod, Strip, Tube
Zinc	0.25 % Show Material materials with Zinc of 0.25 %	O	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 255, EN 14286, EN 1592, EN 485, EN 754, EN 755	Sheet, Rod, Strip, Tube

Technological properties

Property
Anodizing	decorative: sufficient, Protective: good
Brazing	hard brazing (with flux/ without flux): poor / poor, friction soldering: acceptable, soft brazing with flux: poor
Corrosion properties	Seawater: very good, weathering: very good
Workability	Bending / Spinning (cold): good / sufficient, Impact extrusion (cold): sufficient, Deep drawing / upsetting (Condition) good (O) / good (O)

Looking for suppliers of this material? Click to see 11 supplier of EN 573-3 Grade 3.3547 O on Matmatch