Properties
General
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Density | 2.85 g/cm³ Show Material materials with Density of 2.85 g/cm³ | T3511 | EN 573-3, EN 754 |
Mechanical
| Property | Value | Condition | Related Standards | Comment |
|---|---|---|---|---|
Elastic modulus | 72.5 GPa Show Material materials with Elastic modulus of 72.5 GPa | T3511 | EN 573-3, EN 754 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 2000 Series Aluminium | ||
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] | Typical for Wrought 2000 Series Aluminium | ||
Shear modulus | 27.3 GPa Show Material materials with Shear modulus of 27.3 GPa | T3511 | EN 573-3, EN 754 | |
Tensile strength | 370.0 MPa Show Material materials with Tensile strength of 370.0 MPa | T3511 | EN 573-3, EN 754 |
Thermal
| Property | Temperature | Value | Condition | Related Standards |
|---|---|---|---|---|
Coefficient of thermal expansion | 20 °C | 2.3e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3e-05 1/K | T3511 | EN 573-3, EN 754 |
100 °C | 2.3e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.3e-05 1/K | T3511 | EN 573-3, EN 754 | |
Melting point | 507.0 - 650.0 °C Show Material materials with Melting point of 507.0 - 650.0 °C | T3511 | EN 573-3, EN 754 | |
Specific heat capacity | 860.0 J/(kg·K) Show Material materials with Specific heat capacity of 860.0 J/(kg·K) | T3511 | EN 573-3, EN 754 | |
Thermal conductivity | 130.0 - 160.0 W/(m·K) Show Material materials with Thermal conductivity of 130.0 - 160.0 W/(m·K) | T3511 | EN 573-3, EN 754 |
Electrical
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Electrical conductivity | 18000000.0 - 22000000.0 S/m Show Material materials with Electrical conductivity of 18000000.0 - 22000000.0 S/m | T3511 | EN 573-3, EN 754 |
Electrical resistivity | 4.55e-08 - 5.56e-08 Ω·m Show Material materials with Electrical resistivity of 4.55e-08 - 5.56e-08 Ω·m | T3511 | EN 573-3, EN 754 |
Chemical properties
| Property | Value | Condition | Related Standards |
|---|---|---|---|
Bismuth | 0.2 % Show Material materials with Bismuth of 0.2 % | T3511 | EN 573-3, EN 754 |
Chromium | 0.1 % Show Material materials with Chromium of 0.1 % | T3511 | EN 573-3, EN 754 |
Copper | 3.3 - 4.6 % Show Material materials with Copper of 3.3 - 4.6 % | T3511 | EN 573-3, EN 754 |
Iron | 0.80 % Show Material materials with Iron of 0.80 % | T3511 | EN 573-3, EN 754 |
Magnesium | 0.4 - 1.8 % Show Material materials with Magnesium of 0.4 - 1.8 % | T3511 | EN 573-3, EN 754 |
Manganese | 0.1 % Show Material materials with Manganese of 0.1 % | T3511 | EN 573-3, EN 754 |
Nickel | 0.2 % Show Material materials with Nickel of 0.2 % | T3511 | EN 573-3, EN 754 |
Silicon | 0.8 % Show Material materials with Silicon of 0.8 % | T3511 | EN 573-3, EN 754 |
Tin | 0.2 % Show Material materials with Tin of 0.2 % | T3511 | EN 573-3, EN 754 |
Titanium | 0.2 % Show Material materials with Titanium of 0.2 % | T3511 | EN 573-3, EN 754 |
Zinc | 0.8 % Show Material materials with Zinc of 0.8 % | T3511 | EN 573-3, EN 754 |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | Protective: poor | |
| Brazing | friction soldering: sufficient | |
| Corrosion properties | Seawater: poor, weathering: poor | |
| Workability | Bending / Spinning (cold): sufficient / -, Deep drawing / upsetting (Condition) - / sufficient | |