DIN 1725-1 Grade 3.4345 T6

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlZnMgCu0,5 belongs to the aluminum materials, which achieve very high mechanical strength. With hot ageing the strength grade F 49 is attainable. This alloy is good splinter-giving machinably. The alloy is weldable with consideration of certain conditions, especially a heat influence zone with small strength appears there. One should not weld therefore if possible. A good corrosion resistance can be only guaranteed, if an appropriate protective surface layer is present. The corrosion resistance improves noticeably also by hot ageing. Roll-plating of sheet metals of this alloy e.g. with AlZn1 will support the small corrosion resistance with exhaust the high mechanical strenght fully. Thus the area of application extends noticeably. This alloy possesses well splinter-giving workability. Heat treatment for hardening: solution annealing: 470 to 480 °C, quenching in water hot ageing: 12 to 24 h at 115 to 125 °C, 4 to 6 h at 165 to 180 °C (two stage ageing) cold ageing is uncommon Application: In mechanical engineering for devices, tools. Predominantly tension-poor strained sheet metals for baseplates, head and stamp retaining plates as well as in the automobile engineering for safety-related parts and bumpers.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.78 g/cm³ Show Material materials with Density of 2.78 g/cm³	T6	EN 573-3, EN 485, EN 754, EN 755
	20.0 °C	2.78 g/cm³ Show Material materials with Density of 2.78 g/cm³	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elastic modulus		70.0 GPa Show Material materials with Elastic modulus of 70.0 GPa	T6	EN 573-3, EN 485, EN 754, EN 755
	20.0 °C	72.0 GPa Show Material materials with Elastic modulus of 72.0 GPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
Elongation		3.0 % Show Material materials with Elongation of 3.0 %	T6	EN 573-3, EN 485		A100
		5.0 % Show Material materials with Elongation of 5.0 %	T6	EN 573-3, EN 485		A100
		5.0 % Show Material materials with Elongation of 5.0 %	T6	EN 573-3, EN 755		A50
		6.0 % Show Material materials with Elongation of 6.0 %	T6	EN 573-3, EN 754		A50
		7.0 % Show Material materials with Elongation of 7.0 %	T6	EN 573-3, EN 485, EN 755		A100
		8.0 % Show Material materials with Elongation of 8.0 %	T6	EN 573-3, EN 485, EN 754		A100
		8.0 % Show Material materials with Elongation of 8.0 %	T6	EN 573-3, EN 485, EN 754		A50
	20.0 °C	2.0 % Show Material materials with Elongation of 2.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
	20.0 °C	3.0 % Show Material materials with Elongation of 3.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
	20.0 °C	4.0 % Show Material materials with Elongation of 4.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
	20.0 °C	6.0 % Show Material materials with Elongation of 6.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
Hardness, Brinell		121.0 [-] Show Material materials with Hardness, Brinell of 121.0 [-]	T6	EN 573-3, EN 485
		127.0 [-] Show Material materials with Hardness, Brinell of 127.0 [-]	T6	EN 573-3, EN 485
		133.0 [-] Show Material materials with Hardness, Brinell of 133.0 [-]	T6	EN 573-3, EN 485
	20.0 °C	130.0 [-] Show Material materials with Hardness, Brinell of 130.0 [-]	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
	20.0 °C	135.0 [-] Show Material materials with Hardness, Brinell of 135.0 [-]	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 7000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 7000 Series Aluminium
Shear modulus	20.0 °C	27.5 GPa Show Material materials with Shear modulus of 27.5 GPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
Tensile strength		410.0 MPa Show Material materials with Tensile strength of 410.0 MPa	T6	EN 573-3, EN 485
		430.0 MPa Show Material materials with Tensile strength of 430.0 MPa	T6	EN 573-3, EN 485
		450.0 MPa Show Material materials with Tensile strength of 450.0 MPa	T6	EN 573-3, EN 485
		460.0 MPa Show Material materials with Tensile strength of 460.0 MPa	T6	EN 573-3, EN 754
		470.0 MPa Show Material materials with Tensile strength of 470.0 MPa	T6	EN 573-3, EN 755
		490.0 MPa Show Material materials with Tensile strength of 490.0 MPa	T6	EN 573-3, EN 755
	20.0 °C	440.0 MPa Show Material materials with Tensile strength of 440.0 MPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
	20.0 °C	450.0 MPa Show Material materials with Tensile strength of 450.0 MPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
	20.0 °C	460.0 MPa Show Material materials with Tensile strength of 460.0 MPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
	20.0 °C	470.0 MPa Show Material materials with Tensile strength of 470.0 MPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
	20.0 °C	480.0 MPa Show Material materials with Tensile strength of 480.0 MPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	20 °C	2.36e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.36e-05 1/K	T6	EN 573-3, EN 485, EN 754, EN 755
	100 °C	2.36e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.36e-05 1/K	T6	EN 573-3, EN 485, EN 754, EN 755
Melting point		480.0 - 640.0 °C Show Material materials with Melting point of 480.0 - 640.0 °C	T6	EN 573-3, EN 485, EN 754, EN 755
Specific heat capacity		795.0 - 1050.0 J/(kg·K) Show Material materials with Specific heat capacity of 795.0 - 1050.0 J/(kg·K)				Typical for Wrought 7000 Series Aluminium
Thermal conductivity	20.0 °C	130.0 - 160.0 W/(m·K) Show Material materials with Thermal conductivity of 130.0 - 160.0 W/(m·K)	T6	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754, EN 755	Forging

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape
Electrical conductivity	20.0 °C	19000000.0 - 23000000.0 S/m Show Material materials with Electrical conductivity of 19000000.0 - 23000000.0 S/m	T6	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754, EN 755	Forging
Electrical resistivity		4.35e-08 - 5.26e-08 Ω·m Show Material materials with Electrical resistivity of 4.35e-08 - 5.26e-08 Ω·m	T6	EN 573-3, EN 485, EN 754, EN 755

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.1 - 0.3 % Show Material materials with Chromium of 0.1 - 0.3 %	T6	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754, EN 755	Forging
Copper	0.5 - 1.0 % Show Material materials with Copper of 0.5 - 1.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754, EN 755	Forging
Iron	0.5 % Show Material materials with Iron of 0.5 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Forging
	0.50 % Show Material materials with Iron of 0.50 %	T6	EN 573-3, EN 485, EN 754, EN 755
Magnesium	2.6 - 3.7 % Show Material materials with Magnesium of 2.6 - 3.7 %	T6	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754, EN 755	Forging
Manganese	0.1 - 0.4 % Show Material materials with Manganese of 0.1 - 0.4 %	T6	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754, EN 755	Forging
Silicon	0.5 % Show Material materials with Silicon of 0.5 %	T6	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754, EN 755	Forging
Zinc	4.3 - 5.2 % Show Material materials with Zinc of 4.3 - 5.2 %	T6	DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754, EN 755	Forging

Technological properties

Property
Anodizing	decorative: not suitable, Protective: good
Brazing	hard brazing (with flux/ without flux): not suitable / not suitable, friction soldering: not suitable, soft brazing with flux: not suitable
Corrosion properties	Seawater: poor, weathering: sufficient
Workability	Bending / Spinning (cold): poor (O) / not suitable, Impact extrusion (cold): not suitable, Deep drawing / upsetting (Condition) not suitable / not suitable

Looking for suppliers of this material? Click to see 3 supplier of DIN 1725-1 Grade 3.4345 T6 on Matmatch