General
Property | Value | Condition | Related Standards |
---|---|---|---|
Density | 2.7 g/cm³ Show Material materials with Density of 2.7 g/cm³ | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Mechanical
Property | Value | Condition | Related Standards | Comment |
---|---|---|---|---|
Bending angle 180° | 0.5 °/t Show Material materials with Bending angle 180° of 0.5 °/t | H111 | EN 573-3, EN 485 | |
1.0 °/t Show Material materials with Bending angle 180° of 1.0 °/t | H111 | EN 573-3, EN 485 | ||
Bending angle 90° | 0.5 °/t Show Material materials with Bending angle 90° of 0.5 °/t | H111 | EN 573-3, EN 485 | |
1.0 °/t Show Material materials with Bending angle 90° of 1.0 °/t | H111 | EN 573-3, EN 485 | ||
Elastic modulus | 69.0 GPa Show Material materials with Elastic modulus of 69.0 GPa | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
Hardness, Brinell | 20.0 [-] Show Material materials with Hardness, Brinell of 20.0 [-] | H111 | EN 573-3, EN 485 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 1000 Series Aluminium | ||
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] | Typical for Wrought 1000 Series Aluminium | ||
Shear modulus | 25.9 GPa Show Material materials with Shear modulus of 25.9 GPa | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
Tensile strength | 60.0 - 95.0 MPa Show Material materials with Tensile strength of 60.0 - 95.0 MPa | H111 | EN 573-3, EN 754, EN 755 | |
60.0 MPa Show Material materials with Tensile strength of 60.0 MPa | H111 | EN 573-3, EN 755 | ||
65.0 - 95.0 MPa Show Material materials with Tensile strength of 65.0 - 95.0 MPa | H111 | EN 573-3, EN 485 |
Thermal
Property | Temperature | Value | Condition | Related Standards |
---|---|---|---|---|
Coefficient of thermal expansion | -50 °C | 2.17e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.17e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 |
20 °C | 2.17e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.17e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
20 °C | 2.35e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.35e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
20 °C | 2.4399999999999997e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.4399999999999997e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
20 °C | 2.5399999999999997e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.5399999999999997e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
100 °C | 2.35e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.35e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
200 °C | 2.4399999999999997e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.4399999999999997e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
300 °C | 2.5399999999999997e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.5399999999999997e-05 1/K | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
Melting point | 646.0 - 657.0 °C Show Material materials with Melting point of 646.0 - 657.0 °C | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
Specific heat capacity | 900.0 J/(kg·K) Show Material materials with Specific heat capacity of 900.0 J/(kg·K) | H111 | EN 573-3, EN 485, EN 754, EN 755 | |
Thermal conductivity | 210.0 - 220.0 W/(m·K) Show Material materials with Thermal conductivity of 210.0 - 220.0 W/(m·K) | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Electrical
Property | Value | Condition | Related Standards |
---|---|---|---|
Electrical conductivity | 34000000.0 - 36000000.0 S/m Show Material materials with Electrical conductivity of 34000000.0 - 36000000.0 S/m | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Electrical resistivity | 2.78e-08 - 2.94e-08 Ω·m Show Material materials with Electrical resistivity of 2.78e-08 - 2.94e-08 Ω·m | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Chemical properties
Property | Value | Condition | Related Standards |
---|---|---|---|
Aluminium | 99.5 % Show Material materials with Aluminium of 99.5 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Copper | 0.05 % Show Material materials with Copper of 0.05 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Iron | 0.40 % Show Material materials with Iron of 0.40 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Magnesium | 0.05 % Show Material materials with Magnesium of 0.05 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Manganese | 0.05 % Show Material materials with Manganese of 0.05 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Silicon | 0.25 % Show Material materials with Silicon of 0.25 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Titanium | 0.05 % Show Material materials with Titanium of 0.05 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Zinc | 0.07 % Show Material materials with Zinc of 0.07 % | H111 | EN 573-3, EN 485, EN 754, EN 755 |
Technological properties
Property | ||
---|---|---|
Anodizing | decorative: gut (EQ: sehr gut), Protective: very good | |
Brazing | hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good | |
Corrosion properties | Seawater: acceptable, weathering: good | |
Workability | Bending / Spinning (cold): very good / very good, Impact extrusion (cold): very good, Deep drawing / upsetting (Condition) very good (H14) / very good (H12) |