AA Standards Grade 2024 T36

Want to keep this datasheet? Save it now in your required format

Related Standards

Equivalent Materials

This material data has been provided by AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueTemperature

Density

2.78 g/cm³

Show Material materials with Density of 2.78 g/cm³ at 23.0 °C

23.0 °C

Mechanical

PropertyValueTemperatureComment

Bending Fatigue Strength

125 MPa

Show Material materials with Bending Fatigue Strength of 125 MPa at 23.0 °C

23.0 °C

Elastic modulus

73 GPa

Show Material materials with Elastic modulus of 73 GPa at 23.0 °C

23.0 °C

Elongation A50

10 - 13 %

Show Material materials with Elongation A50 of 10 - 13 % at 23.0 °C

23.0 °C

Hardness, Brinell

130 [-]

Show Material materials with Hardness, Brinell of 130 [-] at 23.0 °C

23.0 °C

Plane-Strain Fracture Toughnes

22 - 35 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23.0 °C

23.0 °C

Typical for Wrought 2000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-] at 23.0 °C

23.0 °C

Typical for Wrought 2000 Series Aluminium

Shear modulus

26 - 27.5 GPa

Show Material materials with Shear modulus of 26 - 27.5 GPa at 23.0 °C

23.0 °C

Typical for Wrought 2000 Series Aluminium

Tensile strength

475 - 495 MPa

Show Material materials with Tensile strength of 475 - 495 MPa at 23.0 °C

23.0 °C

Yield strength Rp0.2

360 - 395 MPa

Show Material materials with Yield strength Rp0.2 of 360 - 395 MPa at 23.0 °C

23.0 °C

Thermal

PropertyValueTemperatureComment

Coefficient of thermal expansion

2.32E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.32E-5 1/K at 20.0 °C

20.0 °C

2.32E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.32E-5 1/K at 100.0 °C

100.0 °C

Melting point

505 - 635 °C

Show Material materials with Melting point of 505 - 635 °C

Specific heat capacity

816 - 963 J/(kg·K)

Show Material materials with Specific heat capacity of 816 - 963 J/(kg·K) at 23.0 °C

23.0 °C

Typical for Wrought 2000 Series Aluminium

Thermal conductivity

121 - 193 W/(m·K)

Show Material materials with Thermal conductivity of 121 - 193 W/(m·K) at 23.0 °C

23.0 °C

Electrical

PropertyValueTemperature

Electrical conductivity

1.70E+7 - 2.90E+7 S/m

Show Material materials with Electrical conductivity of 1.70E+7 - 2.90E+7 S/m at 23.0 °C

23.0 °C

Electrical resistivity

3.45E-8 - 5.88E-8 Ω·m

Show Material materials with Electrical resistivity of 3.45E-8 - 5.88E-8 Ω·m at 23.0 °C

23.0 °C

Chemical properties

Property

Chromium

0.1 %

Copper

3.8 - 4.9 %

Iron

0.5 %

Magnesium

1.2 - 1.8 %

Manganese

0.3 - 0.9 %

Other

each 0.05, total 0.15, Rest Al

Silicon

0.5 %

Titanium

0.15 %

Zinc

0.25 %

Technological properties

Property
Brazing

general: no brazing is known or developed

Corrosion properties

Stress corrosion cracking: Betriebsschäden in Gebieten mit Zugspannungen quer zur Kornstruktur, Eingeschränkte Schäden an Laborproben (T4,T3, T351, T3510, T3511), d (T6, T861, T81, T851, T8510, T8511), general: sufficient, in principle it should be protected

General machinability

General: poor (O), good to acceptable

Workability

general (condition): poor(T4, T3, T351, T3510, T3511, T6), not suitable (T361, T861, T81, T851, T8510, T8511)