Stanyl® TW200F6

Alternative and trade names
PA46-GF30
Want to keep this datasheet? Save it now in your required format

Description

Stanyl® TW200F6 is a high heat polyamide that offers excellent creep resistance, strength, stiffness and fatigue resistance, not only at ambient temperatures but especially at high temperatures, while at the same time providing cycle-time advantages and excellent flow.


More technical information and charts that are relevant to the materials performance are displayed in the figures on the right side of the material page


The properties are measured in the dry condition

Datasheet URL:

Stanyl® TW200F6

Ashby charts

See where Stanyl® TW200F6 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

1.41 g/cm³ at 20 °C

ISO 1183

Limiting oxygen index

LOI

20 % at 20 °C

ISO 4589-1/-2

Moisture absorption

cmoisture

2.65 % at 20 °C

ISO 62, after 24h

Viscosity number

η‎‎number

145 cm³/gr

ISO 307, 1157, 1628

Mechanical

Elastic modulus

E

10 GPa at 20 °C

Show Polyamide 46 (PA46) materials with Elastic modulus of 10 GPa at 20 °C

ISO 527-1/-2

Hide chart

Elongation

A

4 % at 20 °C

Show Polyamide 46 (PA46) materials with Elongation of 4 % at 20 °C

ISO 527-1/-2

Unlock all property charts

Flexural modulus

Ebend

9 GPa at 20 °C

Show Polyamide 46 (PA46) materials with Flexural modulus of 9 GPa at 20 °C

ISO 178

Unlock all property charts

Flexural strength

σbend

300 MPa at 20 °C

Show Polyamide 46 (PA46) materials with Flexural strength of 300 MPa at 20 °C

ISO 178

Unlock all property charts

Impact strength, Charpy notched

Ivnot

11 kJ/m² at -30 °C

Show Polyamide 46 (PA46) materials with Impact strength, Charpy notched of 11 kJ/m² at -30 °C

ISO 179/1eU

Unlock all property charts

Impact strength, Charpy unnotched

Iunnot

65 kJ/m² at -30 °C

Show Polyamide 46 (PA46) materials with Impact strength, Charpy unnotched of 65 kJ/m² at -30 °C

ISO 179/1eU

Unlock all property charts

Impact strength, Izod notched

IIzod,not

11 kJ/m² at -30 °C

Show Polyamide 46 (PA46) materials with Impact strength, Izod notched of 11 kJ/m² at -30 °C

ISO 180/1A

Unlock all property charts

Tensile strength

Rm

210 MPa at 20 °C

Show Polyamide 46 (PA46) materials with Tensile strength of 210 MPa at 20 °C

ISO 527-1/-2

Unlock all property charts

Thermal

Ball Pressure Test

nan

Ball pressure temperature

Tball

285 °C

Coefficient of thermal expansion

α

2.5E-5 1/K at 20 °C

ISO 11359-1/-2

Coefficient of thermal expansion, transverse

αtrans

6E-5 1/K at 20 °C

ISO 11359-1/-2

Flammability

for thickness 1.5 and 0.75mm: HB, UL recognition: Yes, IEC 60695-11-10

Glow Wire Flammability Index (GWFI)

960°C at 3mm and 650°C at 0.75mm, IEC 60695-2-1

Glow Wire Ignition Temperature (GWIT)

725°C at 3mm and. 700°C at 0.75mm, IEC 60695-2-13

Heat deflection temperature, 0.45 MPa

HDT0.45,MPa

290 °C

ISO 75-1/-2

Heat deflection temperature, 1.80 MPa

HDT1.8,MPa

290 °C

ISO 75-1/-2

Melting point

Tm

295 °C

ISO 11357-1/-3, 10°C/min

Relative temperature index, electrical

RTIel

140 °C

UL 746B, Thickness 0.9, 3mm

Relative temperature index, mechanical impact

RTIimp

120140 °C

UL 746B, respectively for 0.9 and 3mm thickness

Relative temperature index, mechanical strength

RTIstr

120140 °C

UL 746B, respectively for 0.9 and 3mm thickness

Vicat softening temperature

Tsoft

290 °C

ISO 306, 50°C/h 50N

Electrical

Comparative tracking index

CTI

300 V at 20 °C

IEC 60112

Dielectric constant, 100Hz

εr,100Hz

4.3 [-] at 20 °C

IEC 60250

Dielectric constant, 1MHz

εr,1MHz

4 [-] at 20 °C

IEC 60250

Dielectric strength

EDS

30 kV/mm at 20 °C

IEC 60243-1

Dissipation factor, 100Hz

ε''100Hz

7E-3 [-] at 20 °C

IEC 60250

Dissipation factor, 1MHz

ε''1MHz

0.02 [-] at 20 °C

IEC 60250

Electrical resistivity

ρel

1.00E+14 Ω·m at 20 °C

IEC 60093

Rheological Properties

Density of melt

ρmelt

1.21 g/cm³

Eff. thermal diffusivity

αdiff,melt

0.11 mm²/s

Shrinkage

cshrink

0.5 % at 20 °C

Sim. to ISO 294-4

Shrinkage, transverse

cshrink, trans

1.3 % at 20 °C

Sim. to ISO 294-4

Specific heat capacity melt

cp,melt

2200 J/(kg·K)

Spiral flow length

1.0 mm 800 bar: 100mm, 1.0 mm 900 bar: 110mm, 1.0 mm 1000 bar: 120mm, 0.5mm 1200 bar: 33mm, 0.5 mm 1600 bar: 44mm, 0.5 mm 2000 bar: 76mm

Thermal conductivity of melt

λmelt

0.3 W/(m·K)

Technological properties

Application areas

Automotive Bearing Cages, Automotive Connectors, Automotive e-motor Bobbins, Bobbins, Brushholders (electrical components), Brushholders (electro motors), Charge Air Cooler Caps, Coil insulation, DRL sockets, E-Boxes, E-motor electric insulation, Endlaminates (electro motors), Fuse Holders, Hot Charged Air Ducts, Lawnmower Muffler Components, Lawnmower Trimmer Muffler, MTF/DMF Components, Positition Sensor, Self propelled lawnmower transmission gears, Speed Sensor, Start/Stop: Alternator and Starter parts, Suspension System Top Mounts, Temperature Sensor, Torque Convertor Components

Filler Type

Fillers

30% Glass Fiber

Modifications

Processing Tag

This material data has been provided by DSM Engineering Materials.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.