High Performance Spray Formed Aluminium Alloy DISPAL S260 F

Alternative and trade names
AlSi25Cu4Mg

Want to keep this datasheet? Save it now in your required format

Description

Spray formed aluminium alloy with good wear resistance.

Available in Round bars, Flat plates, Customer specifications.

Use the URL below for more information:

DISPAL Alloys

This material data has been provided by Gränges.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value
Density	23.0 °C	2.66 g/cm³ Show Supplier Material materials with Density of 2.66 g/cm³

Mechanical

Property	Temperature	Value
Elastic modulus	23.0 °C	85 GPa Show Supplier Material materials with Elastic modulus of 85 GPa
Elongation A50	23.0 °C	1 % Show Supplier Material materials with Elongation A50 of 1 %
Hardness, Vickers, 30	23.0 °C	110 [-] Show Supplier Material materials with Hardness, Vickers, 30 of 110 [-]

Thermal

Property	Temperature	Value
Coefficient of thermal expansion	23.0 °C	1.67E-5 - 1.77E-5 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.67E-5 - 1.77E-5 1/K
Melting point		507.1 °C Show Supplier Material materials with Melting point of 507.1 °C
Specific heat capacity	23.0 °C	880 J/(kg·K) Show Supplier Material materials with Specific heat capacity of 880 J/(kg·K)
Thermal conductivity	30.0 °C	135.5 W/(m·K) Show Supplier Material materials with Thermal conductivity of 135.5 W/(m·K)

Electrical

Property	Temperature	Value
Electrical conductivity	23.0 °C	1.44E+7 S/m Show Supplier Material materials with Electrical conductivity of 1.44E+7 S/m

Chemical properties

Property	Value
Copper	4 % Show Supplier Material materials with Copper of 4 %
Magnesium	1 % Show Supplier Material materials with Magnesium of 1 %
Silicon	25 % Show Supplier Material materials with Silicon of 25 %

Technological properties

Property
Application areas	Powertrain Applications, Cylinder Liners, Automotive
Processing history	Spray Compaction, Extrusion

High Performance Spray Formed Aluminium Alloy DISPAL S260 F

Description

Ashby charts

Applications

Materials by this supplier

Use cases

Properties