PP ISO-TECH

Alternative and trade names
ISO-PP

Want to keep this datasheet? Save it now in your required format

Description

ISO-PP is often used in chemical plants thanks to its pronounced chemical resistance. This semi-crystalline thermoplastic also has a very low moisture absorption. The key features are:

Very high chemical resistance

Minimal moisture absorption

High dimensional stability

This material data has been provided by ISO-TECH Kunststoff GmbH.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Comment
Density	0.91 g/cm³ Show Supplier Material materials with Density of 0.91 g/cm³	ISO 1183
Water absorption	0.01 % Show Supplier Material materials with Water absorption of 0.01 %	ISO 62

Mechanical

Property	Value	Comment
Elastic modulus	1 GPa Show Supplier Material materials with Elastic modulus of 1 GPa	ISO 527
Elongation	50 % Show Supplier Material materials with Elongation of 50 %	min., ISO 527
Elongation at yield	10 % Show Supplier Material materials with Elongation at yield of 10 %	ISO 527
Hardness, Ball Indentation	67 MPa Show Supplier Material materials with Hardness, Ball Indentation of 67 MPa	ISO 2039-1
Hardness, Shore D	70 [-] Show Supplier Material materials with Hardness, Shore D of 70 [-]	DIN 53505
Impact strength, Charpy notched	50 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 50 kJ/m²	ISO 179
Yield strength	30 MPa Show Supplier Material materials with Yield strength of 30 MPa	ISO 527
Impact strength, Charpy unnotched	No break, ISO 179

Thermal

Property	Value	Pressure	Comment
Heat deflection temperature	96 °C Show Supplier Material materials with Heat deflection temperature of 96 °C	0.45 MPa
Max service temperature	100 °C Show Supplier Material materials with Max service temperature of 100 °C		Longterm
	Long
	Short
Min service temperature	5 °C Show Supplier Material materials with Min service temperature of 5 °C		Longterm
Vicat softening temperature	91 °C Show Supplier Material materials with Vicat softening temperature of 91 °C		ISO 306, VST B50
Flammability	HB UL 94

Electrical

Property	Value	Comment
Dielectric constant	2.3 [-] Show Supplier Material materials with Dielectric constant of 2.3 [-]	DIN 53483
Loss tangent	0.0002 [-] Show Supplier Material materials with Loss tangent of 0.0002 [-]	DIN 53483
Volume resistivity	1e+16 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+16 Ω·cm	min., VDE 0303

Technological properties

Property

Certifications

RoHS,REACH

UV resistance

Partly

PP ISO-TECH

Description

Ashby charts

Materials by this supplier

Properties