VYPET™ VNT-645

Alternative and trade names
PET-GF45

Want to keep this datasheet? Save it now in your required format

Description

Polyethylene Terephthalate (PET) with 45% Glass Fiber Reinforced. Contains a minimum of 18% Post-consumer resin

This material data has been provided by Lavergne.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.68 g/cm³ Show Supplier Material materials with Density of 1.68 g/cm³	ASTM D792
Recycled Content		18 % Show Supplier Material materials with Recycled Content of 18 %

Mechanical

Property	Temperature	Value	Comment
Flexural modulus	23.0 °C	14.5 GPa Show Supplier Material materials with Flexural modulus of 14.5 GPa	ASTM D790
Flexural strength	23.0 °C	245 MPa Show Supplier Material materials with Flexural strength of 245 MPa	ASTM D790
Impact strength, Izod notched, ASTM	23.0 °C	80 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 80 J/m	ASTM D256
Tensile strength	23.0 °C	155 MPa Show Supplier Material materials with Tensile strength of 155 MPa	ASTM D638

Thermal

Property	Temperature	Value	Comment
Ash content	23.0 °C	45 % Show Supplier Material materials with Ash content of 45 %	ASTM D5630
Heat deflection temperature, 1.80 MPa		228 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 228 °C	ASTM D648

Rheological Properties

Property	Temperature	Value	Comment
Shrinkage	23.0 °C	0.4 % Show Supplier Material materials with Shrinkage of 0.4 %	ASTM D955
Shrinkage, transverse	23.0 °C	1 % Show Supplier Material materials with Shrinkage, transverse of 1 %	ASTM D955

Technological properties

Property
Application areas	Electrical components (e.g. electric motors, brackets, connectors), structural applications (grills).
Certifications	RoHS,RECH,ULE Environmental Claims Validation
Color	Black
Fillers	45% Glass Fiber
Processing methods	Drying to Dew Point:-18°C or lower Feed zone: 260-270°C Middle zone: 265-275°C Front zone: 270-295°C Nozzle: 275-300°C Melt temperature: 275-300°C Mold temperature (thick wall parts): 95-120°C Mold temperature (thin wall parts): 95-120°C Injection Pressure: 55-85 MPa Injection Speed: Fast Back Pressure: Low Screw Speed: 50-75 rpm

VYPET™ VNT-645

Description

Ashby charts

Materials by this supplier

Use cases

Properties