The material: 'Tungsten Alloy EF 175 N*' you were looking for has been superseded by the one below.

Tungsten Alloy EF 175 N*

Want to keep this datasheet? Save it now in your required format


Tungsten alloys, which contain elements such as nickel, copper and iron, produce a host of alloys which have engineering properties similar to steel, are relatively easy to machine, and can be plated or painted to enhance their corrosion protection. These alloys are approximately 50% denser than lead resulting in a higher concentration of mass in a limited area.

Related Standards

Equivalent Materials

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





23.0 °C

17.5 g/cm³

Show Material materials with Density of 17.5 g/cm³



Elastic modulus

23.0 °C

331 GPa

Show Material materials with Elastic modulus of 331 GPa


23.0 °C

2 %

Show Material materials with Elongation of 2 %

Hardness, Rockwell C

23.0 °C

33 [-]

Show Material materials with Hardness, Rockwell C of 33 [-]

Tensile strength

23.0 °C

648 MPa

Show Material materials with Tensile strength of 648 MPa

Yield strength

23.0 °C

517 MPa

Show Material materials with Yield strength of 517 MPa

Chemical properties



92.5 %

Show Material materials with Tungsten of 92.5 %

Technological properties

Application areas

Common applications of Tungsten Alloys: Radiation shielding, boring bars, counterweights in aircraft and racing cars