DIN 1725-1 Grade 3.2316 T6

Want to keep this datasheet? Save it now in your required format

Description

This cold and hot hardenable material reaches mechanical strength of 200 to 250 MPa with A5-elongation at break of approx. 10 %. In warm and/or cold-hardened condition is this alloy only limited formable, in the soft material condition however well. Weldability, corrosion resistance and anodisingability of this material are good. However this alloy is used more for rivet or bolt joints, because of the destabilization danger in the welding zone. Heat treatment for hardening: solution annealing: 525 to 540 °C, quenching on air or in water cold ageing: 5 to 8 d at ambient temperature hot ageing: 4 to 16 h at 155 to 190 °C Application: In the construction of vehicles for vehicle floors, stands, commercial motor vehicle superstructures of all kinds, trim. In the building industry for window, doors, window walls, shower cubicles, fences. In the building of rail-mounted vehicles for car boxes. In shipbuilding for sail masts, sail trees. In mechanical engineering (including building of forms) and for metal goods (e.g. building fittings, table-ware, flow pressed parts, reflectors).

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

20.0 °C

2.7 g/cm³

Show Material materials with Density of 2.7 g/cm³

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Elastic modulus

20.0 °C

73.0

Show Material materials with Elastic modulus of 73.0

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Elongation

20.0 °C

8.0 %

Show Material materials with Elongation of 8.0 %

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Hardness, Brinell

20.0 °C

75.0 [-]

Show Material materials with Hardness, Brinell of 75.0 [-]

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 6000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 6000 Series Aluminium

Shear modulus

20.0 °C

27.0

Show Material materials with Shear modulus of 27.0

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Tensile strength

20.0 °C

275.0 MPa

Show Material materials with Tensile strength of 275.0 MPa

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

1.6e-05 - 2.4e-05 1/K

Show Material materials with Coefficient of thermal expansion of 1.6e-05 - 2.4e-05 1/K

Typical for Wrought 6000 Series Aluminium

Melting point

555.0 - 655.0 °C

Show Material materials with Melting point of 555.0 - 655.0 °C

Typical for Wrought 6000 Series Aluminium

Specific heat capacity

887.0 - 963.0 J/(kg·K)

Show Material materials with Specific heat capacity of 887.0 - 963.0 J/(kg·K)

Typical for Wrought 6000 Series Aluminium

Thermal conductivity

20.0 °C

170.0 - 220.0 W/(m·K)

Show Material materials with Thermal conductivity of 170.0 - 220.0 W/(m·K)

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Electrical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Electrical conductivity

20.0 °C

24000000.0 - 32000000.0 S/m

Show Material materials with Electrical conductivity of 24000000.0 - 32000000.0 S/m

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Electrical resistivity

2.9e-08 - 5e-08 Ω·m

Show Material materials with Electrical resistivity of 2.9e-08 - 5e-08 Ω·m

Typical for Wrought 6000 Series Aluminium

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.03

Show Material materials with Chromium of 0.03

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Copper

0.05

Show Material materials with Copper of 0.05

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Iron

0.25

Show Material materials with Iron of 0.25

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Magnesium

0.6 - 0.7 %

Show Material materials with Magnesium of 0.6 - 0.7 %

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Manganese

0.15

Show Material materials with Manganese of 0.15

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Silicon

0.8 - 1.0 %

Show Material materials with Silicon of 0.8 - 1.0 %

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Titanium

0.05

Show Material materials with Titanium of 0.05

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Zinc

0.1

Show Material materials with Zinc of 0.1

T6

DIN 1725-1, EN 573-3, EN 573-4

Forging

Technological properties

Property
Workability

Excellent workability.