See where EN 573-3 Grade AW-1200 H46 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.
2.71 - 2.72 g/cm³ at 20 °C
Coefficient of thermal expansionα
2.17E-5 1/K at -50 °C
644 - 657 °C
Specific heat capacitycp
898 - 1004 J/(kg·K) at 20 °C
205 - 225 W/(m·K) at 20 °C
3.30E+7 - 3.55E+7 S/m at 20 °C
2.94E-8 - 3.03E-8 Ω·m at 20 °C
Si + Fe < 1.00, each 0.05, total 0.15
decorative: acceptable, Protective: very good
hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good
Seawater: sufficient, weathering: acceptable
Bending / Spinning (cold): very good / very good, Impact extrusion (cold): very good, Deep drawing / upsetting (Condition) very good (H12) / very good (H12)
This material data has been provided by WIAM,AluKey.