DIN 1725-1 Grade 3.3307 F

Want to keep this datasheet? Save it now in your required format

Description

The alloy Al99,85Mg0,5 belongs to the standardised glossing materials. It can be polished after preceding mechanical polishing chemically or electrolytically to high gloss. For using the high gloss surface a afterwards anodising is necessary. The degree of arranged reflection (gloss degree) dependents from the degree of purity of the alloy and the thickness of the produced anodising layer. The alloy Al99,85Mg0,5 is nature hard, i.e. with their a strength increase can be achieved only by cold forming. The material is well cold and warm fomrable, has a very good corrosion resistance and is also well anodically to be oxidized. Application: For metal goods, like building fittings, table-ware, flow pressed parts, autotrim and divides and for decoration and jeweller goods.

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density		2.69 g/cm³ Show Material materials with Density of 2.69 g/cm³	F	EN 573-3, EN 570
	20.0 °C	2.7 g/cm³ Show Material materials with Density of 2.7 g/cm³	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Tube

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elastic modulus	20.0 °C	70.0 Show Material materials with Elastic modulus of 70.0	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Tube
Elongation	20.0 °C	18.0 % Show Material materials with Elongation of 18.0 %	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Tube	A10
	20.0 °C	20.0 % Show Material materials with Elongation of 20.0 %	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Tube
Hardness, Brinell		27.0 [-] Show Material materials with Hardness, Brinell of 27.0 [-]	F	EN 573-3, EN 570
	20.0 °C	23.0 [-] Show Material materials with Hardness, Brinell of 23.0 [-]	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Tube
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Shear modulus	20.0 °C	27.0 Show Material materials with Shear modulus of 27.0	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Tube
Tensile strength	20.0 °C	70.0 MPa Show Material materials with Tensile strength of 70.0 MPa	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Tube

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion		2.2e-05 - 2.5e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.2e-05 - 2.5e-05 1/K				Typical for Wrought 5000 Series Aluminium
Max service temperature		150.0 °C Show Material materials with Max service temperature of 150.0 °C				Typical for Wrought 5000 Series Aluminium
Melting point		560.0 - 655.0 °C Show Material materials with Melting point of 560.0 - 655.0 °C				Typical for Wrought 5000 Series Aluminium
Specific heat capacity		879.0 - 963.0 J/(kg·K) Show Material materials with Specific heat capacity of 879.0 - 963.0 J/(kg·K)				Typical for Wrought 5000 Series Aluminium
Thermal conductivity	20.0 °C	215.0 W/(m·K) Show Material materials with Thermal conductivity of 215.0 W/(m·K)	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Tube

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Electrical conductivity	20.0 °C	35000000.0 Show Material materials with Electrical conductivity of 35000000.0	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Tube
Electrical resistivity		3.3e-08 - 5e-08 Ω·m Show Material materials with Electrical resistivity of 3.3e-08 - 5e-08 Ω·m				Typical for Wrought 5000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Iron	0.08 % Show Material materials with Iron of 0.08 %	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Tube
	0.08 % Show Material materials with Iron of 0.08 %	F	EN 573-3, EN 570
Magnesium	0.3 - 0.6 % Show Material materials with Magnesium of 0.3 - 0.6 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 570	Profile, Tube
Manganese	0.03 % Show Material materials with Manganese of 0.03 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 570	Profile, Tube
Silicon	0.08 % Show Material materials with Silicon of 0.08 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 570	Profile, Tube
Titanium	0.02 % Show Material materials with Titanium of 0.02 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 570	Profile, Tube
Zinc	0.05 % Show Material materials with Zinc of 0.05 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 570	Profile, Tube

Technological properties

Property

Workability

Good workability.