DIN 1725-1 Grade 3.3315 H14

Want to keep this datasheet? Save it now in your required format

Description

The AlMg alloy is characterised all by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increase the strength, the cold forming capacity decreases with it. The alloys of this type are nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. The material is well polishabel and anodisable. The splinter-giving machinability becomes better with increasing Mg content just like the weldability. The alloy AlMg1 reaches strength grades to F 22. Application: Their main field of application is the building industry. In the building industry for claddings, roofing and trim, for transport containers. For metal goods, like building fittings, table-ware, flow pressed parts, reflectors. In food industry, for furniture (incl. camping furniture) as well as for describe and for covers with composite slabs (intermediate layer: Polyethylene).

Related Standards

Equivalent Materials

This material data has been provided by WIAM,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

2.69 g/cm³

Show Material materials with Density of 2.69 g/cm³

H14

EN 573-3, EN 485, EN 754

20.0 °C

2.69 g/cm³

Show Material materials with Density of 2.69 g/cm³

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Sheet, Flat, Strip, Wire

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Bending angle 180°

2.0 °/t

Show Material materials with Bending angle 180° of 2.0 °/t

H14

EN 573-3, EN 485

2.5 °/t

Show Material materials with Bending angle 180° of 2.5 °/t

H14

EN 573-3, EN 485

Bending angle 90°

0.5 °/t

Show Material materials with Bending angle 90° of 0.5 °/t

H14

EN 573-3, EN 485

1.0 °/t

Show Material materials with Bending angle 90° of 1.0 °/t

H14

EN 573-3, EN 485

2.0 °/t

Show Material materials with Bending angle 90° of 2.0 °/t

H14

EN 573-3, EN 485

2.5 °/t

Show Material materials with Bending angle 90° of 2.5 °/t

H14

EN 573-3, EN 485

Elastic modulus

69.5 GPa

Show Material materials with Elastic modulus of 69.5 GPa

H14

EN 573-3, EN 485, EN 754

20.0 °C

60.0 - 65.0 GPa

Show Material materials with Elastic modulus of 60.0 - 65.0 GPa

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Sheet, Flat, Strip, Wire

Elongation

2.0 %

Show Material materials with Elongation of 2.0 %

H14

EN 573-3, EN 485

A50

3.0 %

Show Material materials with Elongation of 3.0 %

H14

EN 573-3, EN 485

A50

4.0 %

Show Material materials with Elongation of 4.0 %

H14

EN 573-3, EN 485, EN 754

A50

5.0 %

Show Material materials with Elongation of 5.0 %

H14

EN 573-3, EN 485

A50

6.0 %

Show Material materials with Elongation of 6.0 %

H14

EN 573-3, EN 754

A100

20.0 °C

2.0 %

Show Material materials with Elongation of 2.0 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Flat

A100

20.0 °C

4.0 %

Show Material materials with Elongation of 4.0 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Sheet, Flat, Strip

A10

20.0 °C

4.0 %

Show Material materials with Elongation of 4.0 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Wire

A100

20.0 °C

5.0 %

Show Material materials with Elongation of 5.0 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod

A10

20.0 °C

5.0 %

Show Material materials with Elongation of 5.0 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Sheet, Strip

20.0 °C

6.0 %

Show Material materials with Elongation of 6.0 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod

20.0 °C

7.0 %

Show Material materials with Elongation of 7.0 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Wire

A10

Hardness, Brinell

48.0 [-]

Show Material materials with Hardness, Brinell of 48.0 [-]

H14

EN 573-3, EN 485

20.0 °C

40.0 [-]

Show Material materials with Hardness, Brinell of 40.0 [-]

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Wire

20.0 °C

47.0 [-]

Show Material materials with Hardness, Brinell of 47.0 [-]

H14

DIN 1725-1, EN 573-3, EN 573-4

Sheet, Strip

Unlock all property charts

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 5000 Series Aluminium

Shear modulus

26.1 GPa

Show Material materials with Shear modulus of 26.1 GPa

H14

EN 573-3, EN 485, EN 754

20.0 °C

25.0 GPa

Show Material materials with Shear modulus of 25.0 GPa

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Sheet, Flat, Strip, Wire

Shear strength

20.0 °C

80.0 MPa

Show Material materials with Shear strength of 80.0 MPa

H14

DIN 1725-1, EN 573-3, EN 573-4

Wire

Tensile strength

140.0 MPa

Show Material materials with Tensile strength of 140.0 MPa

H14

EN 573-3, EN 754

20.0 °C

140.0 MPa

Show Material materials with Tensile strength of 140.0 MPa

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Wire

20.0 °C

145.0 - 185.0 MPa

Show Material materials with Tensile strength of 145.0 - 185.0 MPa

H14

DIN 1725-1, EN 573-3, EN 573-4, EN 485

Sheet, Strip, Flat

Unlock all property charts

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

-50 °C

2.18e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.18e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

-50.0 °C

2.18e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.18e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

20 °C

2.18e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.18e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

20 °C

2.36e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.36e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

20 °C

2.45e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.45e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

20 °C

2.55e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.55e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

100 °C

2.36e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.36e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

100.0 °C

2.36e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.36e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

200 °C

2.45e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.45e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

200.0 °C

2.45e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.45e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

300 °C

2.55e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.55e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

300.0 °C

2.55e-05 1/K

Show Material materials with Coefficient of thermal expansion of 2.55e-05 1/K

H14

EN 573-3, EN 485, EN 754, DIN 1725-1, EN 573-4

Rod, Sheet, Flat, Strip, Wire

Unlock all property charts

Max service temperature

150.0 °C

Show Material materials with Max service temperature of 150.0 °C

Typical for Wrought 5000 Series Aluminium

Melting point

630.0 - 650.0 °C

Show Material materials with Melting point of 630.0 - 650.0 °C

H14

EN 573-3, EN 485, EN 754

Specific heat capacity

20.0 °C

879.0 J/(kg·K)

Show Material materials with Specific heat capacity of 879.0 J/(kg·K)

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Sheet, Flat, Strip, Wire

Thermal conductivity

20.0 °C

160.0 - 220.0 W/(m·K)

Show Material materials with Thermal conductivity of 160.0 - 220.0 W/(m·K)

H14

DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754

Rod, Sheet, Flat, Strip, Wire

Electrical

PropertyTemperatureValueConditionRelated StandardsShape

Electrical conductivity

20.0 °C

23000000.0 - 31000000.0 S/m

Show Material materials with Electrical conductivity of 23000000.0 - 31000000.0 S/m

H14

DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754

Rod, Sheet, Flat, Strip, Wire

Electrical resistivity

3.23e-08 - 4.35e-08 Ω·m

Show Material materials with Electrical resistivity of 3.23e-08 - 4.35e-08 Ω·m

H14

EN 573-3, EN 485, EN 754

Chemical properties

PropertyValueConditionRelated StandardsShape

Chromium

0.1 %

Show Material materials with Chromium of 0.1 %

H14

DIN 1725-1, EN 573-3, EN 573-4, EN 485, EN 754

Rod, Sheet, Flat, Strip, Wire

Copper

0.05 %

Show Material materials with Copper of 0.05 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Sheet, Flat, Strip, Wire

0.2 %

Show Material materials with Copper of 0.2 %

H14

EN 573-3, EN 485, EN 754

Iron

0.45 %

Show Material materials with Iron of 0.45 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Sheet, Flat, Strip, Wire

0.70 %

Show Material materials with Iron of 0.70 %

H14

EN 573-3, EN 485, EN 754

Magnesium

0.7 - 1.1 %

Show Material materials with Magnesium of 0.7 - 1.1 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Sheet, Flat, Strip, Wire

1.1 - 1.8 %

Show Material materials with Magnesium of 1.1 - 1.8 %

H14

EN 573-3, EN 485, EN 754

Manganese

0.15 %

Show Material materials with Manganese of 0.15 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Sheet, Flat, Strip, Wire

0.3 %

Show Material materials with Manganese of 0.3 %

H14

EN 573-3, EN 485, EN 754

Silicon

0.3 %

Show Material materials with Silicon of 0.3 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Sheet, Flat, Strip, Wire

0.4 %

Show Material materials with Silicon of 0.4 %

H14

EN 573-3, EN 485, EN 754

Zinc

0.2 %

Show Material materials with Zinc of 0.2 %

H14

DIN 1725-1, EN 573-3, EN 573-4

Rod, Sheet, Flat, Strip, Wire

0.25 %

Show Material materials with Zinc of 0.25 %

H14

EN 573-3, EN 485, EN 754

Technological properties

Property
Workability

Good workability.