Show me around

BS EN 573-3 Grade 3103 H14

Want to keep this datasheet? Save it now in your required format

Description

Related Standards

Equivalent Materials

Ashby charts

See where BS EN 573-3 Grade 3103 H14 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.73 - 2.8 g/cm³ at 20 °C

Mechanical

Elastic modulus

E

69.5 - 72 GPa at 20 °C

Elongation

A

4.6 % at 20 °C

Hardness, Brinell

HB

45 [-] at 20 °C

Plane-Strain Fracture Toughnes

KIC

22 - 35 MPa·√m at 20 °C

Typical for Wrought 3000 Series Aluminium

Poisson's ratio

ν

0.33 [-] at 20 °C

Typical for Wrought 3000 Series Aluminium

Shear modulus

G

25 - 26 GPa at 20 °C

Typical for Wrought 3000 Series Aluminium

Tensile strength

Rm

140 - 180 MPa at 20 °C

Yield strength

YS

130 MPa at 20 °C

Thermal

Coefficient of thermal expansion

α

2.3E-5 - 2.31E-5 1/K at 20 °C

Melting point

Tm

640 - 655 °C

Specific heat capacity

cp

890 J/(kg·K) at 20 °C

Thermal conductivity

λ

160 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

2.44E+8 S/m at 20 °C

Electrical resistivity

ρel

4.11E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Al

96.3 - 99.1 %

Balance

Mn

0.9 - 1.5 %

Cr

0 - 0.1 %

Cu

0 - 0.1 %

Fe

0 - 0.7 %

More

Technological properties

Brazing

Very Good

General machinability

Acceptable

Soldering general

Very Good

Welding

Gas: Very Good; Arc: Very Good; Resistance: Good

Workability

Cold: Good

This material data has been provided by Righton Blackburns,MakeItFrom.com.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.