AA 5005 H19

Want to keep this datasheet? Save it now in your required format

Description

Aluminum AA 5005 is a lean aluminum magnesium alloy with low density and excellent thermal conductivity. This medium strength non-heat-treatable alloy is known for its corrosion resistance in alkaline marine situations. Aluminum AA 5005 is readily machinable, and can be welded using TIG and MIG methods. It is important to note that anodizing is a critical part to how Aluminum AA 5005 is used.

Equivalent Materials

This material data has been provided by MakeItFrom.com.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Applications

Fluid Systems

Fluid Storage

Fluid Storage General

Consumer Goods

Domestic Electrical Appliances

Furniture

Properties

General

Property	Value	Condition
Density	2.7 g/cm³ Show Material materials with Density of 2.7 g/cm³	H19

Mechanical

Property	Value	Condition	Comment
Elastic modulus	69.0 GPa Show Material materials with Elastic modulus of 69.0 GPa	H19
Elongation	1.2 % Show Material materials with Elongation of 1.2 %	H19
Plane-Strain Fracture Toughnes	22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m		Typical for Wrought 5000 Series Aluminium
Poisson's ratio	0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]		Typical for Wrought 5000 Series Aluminium
Shear modulus	26.0 - 26.5 GPa Show Material materials with Shear modulus of 26.0 - 26.5 GPa		Typical for Wrought 5000 Series Aluminium
Tensile strength	240.0 MPa Show Material materials with Tensile strength of 240.0 MPa	H19
Yield strength	210.0 MPa Show Material materials with Yield strength of 210.0 MPa	H19

Thermal

Property	Value	Condition	Comment
Coefficient of thermal expansion	2.4e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.4e-05 1/K	H19
Max service temperature	150.0 °C Show Material materials with Max service temperature of 150.0 °C		Typical for Wrought 5000 Series Aluminium
Melting point	630.0 °C Show Material materials with Melting point of 630.0 °C	H19
Specific heat capacity	900.0 J/(kg·K) Show Material materials with Specific heat capacity of 900.0 J/(kg·K)	H19
Thermal conductivity	200.0 W/(m·K) Show Material materials with Thermal conductivity of 200.0 W/(m·K)	H19

Electrical

Property	Value	Comment
Electrical conductivity	18000000.0 - 31000000.0 S/m Show Material materials with Electrical conductivity of 18000000.0 - 31000000.0 S/m	Typical for Wrought 5000 Series Aluminium
Electrical resistivity	3.3e-08 - 5e-08 Ω·m Show Material materials with Electrical resistivity of 3.3e-08 - 5e-08 Ω·m	Typical for Wrought 5000 Series Aluminium

Chemical properties

Property	Value	Condition
Aluminium	97.0 - 99.5 % Show Material materials with Aluminium of 97.0 - 99.5 %	H19
Chromium	0.1 % Show Material materials with Chromium of 0.1 %	H19
Copper	0.2 % Show Material materials with Copper of 0.2 %	H19
Iron	0.7 % Show Material materials with Iron of 0.7 %	H19
Magnesium	0.5 - 1.1 % Show Material materials with Magnesium of 0.5 - 1.1 %	H19
Manganese	0.2 % Show Material materials with Manganese of 0.2 %	H19
Other	0.15 % Show Material materials with Other of 0.15 %	H19
Silicon	0.3 % Show Material materials with Silicon of 0.3 %	H19
Zinc	0.25 % Show Material materials with Zinc of 0.25 %	H19

Technological properties

Property

Workability

Good workability.