Show me around

AA Standards Grade 5052 H22

Want to keep this datasheet? Save it now in your required format

Description

Related Standards

Equivalent Materials

Ashby charts

See where AA Standards Grade 5052 H22 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.68 - 2.7 g/cm³ at 20 °C

Dimension

Dimensions

Dicke

Mechanical

Plane-Strain Fracture Toughnes

KIC

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

ν

Typical for Wrought 5000 Series Aluminium

Shear modulus

G

Typical for Wrought 5000 Series Aluminium

Thermal

Coefficient of thermal expansion

α

2.38E-5 - 2.4E-5 1/K at 20 °C

Hide chart

Max service temperature

Tmax

150 °C

Typical for Wrought 5000 Series Aluminium

Melting point

Tm

605 - 650 °C

Specific heat capacity

cp

900 J/(kg·K) at 20 °C

Thermal conductivity

λ

138 - 140 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

2.00E+7 - 2.03E+8 S/m at 20 °C

Electrical resistivity

ρel

5E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Al

95.8 - 97.7 %

Mg

2.2 - 2.8 %

Cr

0.15 - 0.35 %

Cu

0 - 0.1 %

Fe

0 - 0.4 %

More

Technological properties

Brazing

general: limited brazing

Corrosion properties

Stress corrosion cracking: no damage during operation and laboratory tests, general: very good, without protection in industrial or seawater atmosphere

General machinability

General: poor (O, H32), sufficient (H34, H36, H38)

Workability

general (condition): good (O), acceptable (H32, H34), poor(H36, H38)

This material data has been provided by MakeItFrom.com,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.