AA 5454 H36
Description
Equivalent Materials
Ashby charts
See where falls on the material property chart for Density against Elastic modulus in your materials selection and design process.
Properties
General
Density ρ
2.7 g/cm³ at 20 °C
Mechanical
Elastic modulus E
71 GPa at 20 °C
Elongation A
3.5 % at 20 °C
Fracture toughness KIC
22 - 35 MPa·√m at 20 °C
Typical for Wrought 5000 Series Aluminium
Poisson's ratio ν
0.33 [-] at 20 °C
Typical for Wrought 5000 Series Aluminium
Shear modulus G
26 - 26.5 GPa at 20 °C
Typical for Wrought 5000 Series Aluminium
Tensile strength Rm
310 MPa at 20 °C
Yield strength YS
260 MPa at 20 °C
Thermal
Coefficient of thermal expansion α
2.4E-5 1/K at 20 °C
Max service temperature Tmax
150 °C
Typical for Wrought 5000 Series Aluminium
Melting point Tm
600 °C
Specific heat capacity cp
900 J/(kg·K) at 20 °C
Thermal conductivity λ
130 W/(m·K) at 20 °C
Electrical
Electrical conductivity σel
1.97E+8 S/m at 20 °C
Electrical resistivity ρel
3.3E-8 - 5E-8 Ω·m at 20 °C
Typical for Wrought 5000 Series Aluminium
Chemical properties
Element
Weight %
Comment
94.5 - 97.1 %
2.4 - 3 %
0.5 - 1 %
0.05 - 0.2 %
0 - 0.1 %
Technological properties
Workability
Good workability.
This material data has been provided by MakeItFrom.com.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.
