Show me around

AA 5454 H38

Want to keep this datasheet? Save it now in your required format

Description

Equivalent Materials

Ashby charts

See where AA 5454 H38 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.69 - 2.7 g/cm³ at 20 °C

Mechanical

Compressive modulus

Ecomp

71 MPa at 20 °C

Elastic modulus

E

71 GPa at 20 °C

Elongation

A

3.5 % at 20 °C

Plane-Strain Fracture Toughnes

KIC

22 - 35 MPa·√m at 20 °C

Typical for Wrought 5000 Series Aluminium

Poisson's ratio

ν

0.33 [-] at 20 °C

Typical for Wrought 5000 Series Aluminium

Shear modulus

G

26 - 26.5 GPa at 20 °C

Typical for Wrought 5000 Series Aluminium

Tensile strength

Rm

360 MPa at 20 °C

Yield strength

YS

290 MPa at 20 °C

Thermal

Coefficient of thermal expansion

α

2.4E-5 1/K at 20 °C

Max service temperature

Tmax

150 °C

Typical for Wrought 5000 Series Aluminium

Melting point

Tm

600 °C

Specific heat capacity

cp

900 J/(kg·K) at 20 °C

Thermal conductivity

λ

130 W/(m·K) at 20 °C

Electrical

Electrical conductivity

σel

1.97E+7 - 1.97E+8 S/m at 20 °C

Typical/derived value

Electrical resistivity

ρel

3.3E-8 - 5E-8 Ω·m at 20 °C

Typical for Wrought 5000 Series Aluminium

Specific Electrical conductivity

34 % IACS

Typical value

Chemical properties

Element

Weight %

Comment

Al

94.5 - 97.1 %

Mg

2.4 - 3 %

Mn

0.5 - 1 %

Cr

0.05 - 0.2 %

Cu

0 - 0.1 %

More

Technological properties

Workability

Good workability.

This material data has been provided by MakeItFrom.com,ASM Handbook Volume 2 Properties and Selection: Nonferrous Alloys and Special-Purpose Materials.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.