Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 23.0 °C | 2.7 g/cm³ Show Material materials with Density of 2.7 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Compressive modulus | 23.0 °C | 69.6 MPa Show Material materials with Compressive modulus of 69.6 MPa | |
Elastic modulus | 23.0 °C | 69 GPa Show Material materials with Elastic modulus of 69 GPa | |
Elongation | 23.0 °C | 9.6 % Show Material materials with Elongation of 9.6 % | |
Elongation A100 | 23.0 °C | 9 % Show Material materials with Elongation A100 of 9 % | |
Elongation A50 | 23.0 °C | 8 - 10 % Show Material materials with Elongation A50 of 8 - 10 % | |
Fatigue strength | 23.0 °C | 97 MPa Show Material materials with Fatigue strength of 97 MPa | Min., for 5x10⁸ cycles |
Hardness, Brinell | 23.0 °C | 95 [-] Show Material materials with Hardness, Brinell of 95 [-] | 500 kg load, 10 mm ball |
Plane-Strain Fracture Toughnes | 23.0 °C | 22 - 35 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m | Typical for Wrought 6000 Series Aluminium |
Poisson's ratio | 23.0 °C | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] | Typical for Wrought 6000 Series Aluminium |
Shear modulus | 23.0 °C | 26 - 26.5 GPa Show Material materials with Shear modulus of 26 - 26.5 GPa | Typical for Wrought 6000 Series Aluminium |
Shear strength | 23.0 °C | 205 MPa Show Material materials with Shear strength of 205 MPa | |
Tensile strength | 23.0 °C | 260 - 290 MPa Show Material materials with Tensile strength of 260 - 290 MPa | |
Yield strength | 23.0 °C | 270 MPa Show Material materials with Yield strength of 270 MPa | |
Yield strength Rp0.2 | 23.0 °C | 240 MPa Show Material materials with Yield strength Rp0.2 of 240 MPa |
Thermal
| Property | Temperature | Value |
|---|---|---|
Coefficient of thermal expansion | 20.0 °C | 2.36E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.36E-5 1/K |
23.0 °C | 2.3E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.3E-5 1/K | |
100.0 °C | 2.36E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.36E-5 1/K | |
Melting point | 605 - 655 °C Show Material materials with Melting point of 605 - 655 °C | |
Specific heat capacity | 23.0 °C | 900 J/(kg·K) Show Material materials with Specific heat capacity of 900 J/(kg·K) |
Thermal conductivity | 23.0 °C | 180 - 188 W/(m·K) Show Material materials with Thermal conductivity of 180 - 188 W/(m·K) |
Electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Electrical conductivity | 23.0 °C | 2.70E+7 - 2.80E+7 S/m Show Material materials with Electrical conductivity of 2.70E+7 - 2.80E+7 S/m | Typical/derived value |
Electrical resistivity | 23.0 °C | 3.5E-8 - 3.7E-8 Ω·m Show Material materials with Electrical resistivity of 3.5E-8 - 3.7E-8 Ω·m | Typical value |
Specific Electrical conductivity | 49 % IACS Show Material materials with Specific Electrical conductivity of 49 % IACS | Typical value |
Chemical properties
| Property | Value | Comment |
|---|---|---|
Aluminium | 97.5 - 99 % Show Material materials with Aluminium of 97.5 - 99 % | |
Chromium | 0 - 0.1 % Show Material materials with Chromium of 0 - 0.1 % | |
Copper | 0 - 0.1 % Show Material materials with Copper of 0 - 0.1 % | |
Iron | 0 - 0.35 % Show Material materials with Iron of 0 - 0.35 % | |
Magnesium | 0.4 - 0.6 % Show Material materials with Magnesium of 0.4 - 0.6 % | |
Manganese | 0 - 0.1 % Show Material materials with Manganese of 0 - 0.1 % | |
Other | 0 - 0.15 % Show Material materials with Other of 0 - 0.15 % | each 0.05, total 0.15, Rest Al |
Silicon | 0.6 - 0.9 % Show Material materials with Silicon of 0.6 - 0.9 % | |
Titanium | 0 - 0.1 % Show Material materials with Titanium of 0 - 0.1 % | |
Zinc | 0 - 0.1 % Show Material materials with Zinc of 0 - 0.1 % |
Technological properties
| Property | ||
|---|---|---|
| Brazing | general: possible with commercial processes and methods | |
| Workability | Excellent workability. | |