Properties
General
| Property | Value | Temperature |
|---|---|---|
Density | 2.7 g/cm³ Show Material materials with Density of 2.7 g/cm³ at 23.0 °C | 23.0 °C |
Mechanical
| Property | Value | Temperature | Comment |
|---|---|---|---|
Bending Fatigue Strength | 95 MPa Show Material materials with Bending Fatigue Strength of 95 MPa at 23.0 °C | 23.0 °C | |
Compressive modulus | 69.7 MPa Show Material materials with Compressive modulus of 69.7 MPa at 23.0 °C | 23.0 °C | |
Elastic modulus | 69 GPa Show Material materials with Elastic modulus of 69 GPa at 23.0 °C | 23.0 °C | |
Elongation | 19 % Show Material materials with Elongation of 19 % at 23.0 °C | 23.0 °C | |
Elongation A100 | 14 - 22 % Show Material materials with Elongation A100 of 14 - 22 % at 23.0 °C | 23.0 °C | |
Elongation A50 | 10 - 22 % Show Material materials with Elongation A50 of 10 - 22 % at 23.0 °C | 23.0 °C | |
Hardness, Brinell | 65 [-] Show Material materials with Hardness, Brinell of 65 [-] at 23.0 °C | 23.0 °C | 500 kg load, 10 mm ball |
Plane-Strain Fracture Toughnes | 22 - 35 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23.0 °C | 23.0 °C | Typical for Wrought 6000 Series Aluminium |
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] at 23.0 °C | 23.0 °C | Typical for Wrought 6000 Series Aluminium |
Shear modulus | 26 - 26.5 GPa Show Material materials with Shear modulus of 26 - 26.5 GPa at 23.0 °C | 23.0 °C | Typical for Wrought 6000 Series Aluminium |
Shear strength | 165 MPa Show Material materials with Shear strength of 165 MPa at 23.0 °C | 23.0 °C | |
Tensile strength | 180 - 240 MPa Show Material materials with Tensile strength of 180 - 240 MPa at 23.0 °C | 23.0 °C | |
Yield strength | 130 MPa Show Material materials with Yield strength of 130 MPa at 23.0 °C | 23.0 °C | |
Yield strength Rp0.2 | 100 - 145 MPa Show Material materials with Yield strength Rp0.2 of 100 - 145 MPa at 23.0 °C | 23.0 °C |
Thermal
| Property | Value | Temperature |
|---|---|---|
Coefficient of thermal expansion | 2.36E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.36E-5 1/K at 20.0 °C | 20.0 °C |
2.4E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.4E-5 1/K at 23.0 °C | 23.0 °C | |
2.36E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.36E-5 1/K at 100.0 °C | 100.0 °C | |
Melting point | 580 - 650 °C Show Material materials with Melting point of 580 - 650 °C | |
Specific heat capacity | 900 J/(kg·K) Show Material materials with Specific heat capacity of 900 J/(kg·K) at 23.0 °C | 23.0 °C |
Thermal conductivity | 155 - 180 W/(m·K) Show Material materials with Thermal conductivity of 155 - 180 W/(m·K) at 23.0 °C | 23.0 °C |
Electrical
| Property | Value | Temperature | Comment |
|---|---|---|---|
Electrical conductivity | 2.30E+7 - 2.70E+7 S/m Show Material materials with Electrical conductivity of 2.30E+7 - 2.70E+7 S/m at 23.0 °C | 23.0 °C | Typical value |
Electrical resistivity | 3.7E-8 - 4.35E-8 Ω·m Show Material materials with Electrical resistivity of 3.7E-8 - 4.35E-8 Ω·m at 23.0 °C | 23.0 °C | Typical value |
Specific Electrical conductivity | 40 % IACS Show Material materials with Specific Electrical conductivity of 40 % IACS | Typical/Derived value |
Chemical properties
| Property | ||
|---|---|---|
Aluminium | 95.9 - 98.6 % | |
Chromium | 0.04 - 0.35 % | |
Copper | 0.15 - 0.4 % | |
Iron | 0 - 0.7 % | |
Magnesium | 0.8 - 1.2 % | |
Manganese | 0 - 0.15 % | |
Other | 0 - 0.15 % | each 0.05, total 0.15, Rest Al |
Silicon | 0.4 - 0.8 % | |
Titanium | 0 - 0.15 % | |
Zinc | 0 - 0.25 % |
Technological properties
| Property | ||
|---|---|---|
| Brazing | general: possible with commercial processes and methods | |
| Corrosion properties | Stress corrosion cracking: no damage during operation and laboratory tests (O, T6, T651, T652, T6510, T6511), no damage during operation, limited damage during laboratory tests (T4, T451, T4510, T4511), general: good, without protection in industrial or seawater atmosphere | |
| General machinability | General: poor (O), sufficient (T4, T451, T4510, T4511, T6, T651, T652, T6510, T6511) | |
| Workability | general (condition): good (O), acceptable (T4, T451, T4510, T4511), poor(T6, T651, T652, T6510, T6511) | |