AA Standards Grade 6063 T4

Want to keep this datasheet? Save it now in your required format

Description

Related Standards

Equivalent Materials

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.7 g/cm³ at 23 °C

Dimension

Dimensions

Wanddicke

Mechanical

Compressive modulus

Ecomp

69.7 MPa at 23 °C

Show 6000 Series materials with Compressive modulus of 69.7 MPa at 23 °C

Elastic modulus

E

69 GPa at 23 °C

Show 6000 Series materials with Elastic modulus of 69 GPa at 23 °C

Elongation

A

17 - 22 % at 23 °C

Show 6000 Series materials with Elongation of 17 - 22 % at 23 °C

Elongation A100

A100

12 - 16 % at 23 °C

Show 6000 Series materials with Elongation A100 of 12 - 16 % at 23 °C

Elongation A50

A50

14 - 22 % at 23 °C

Show 6000 Series materials with Elongation A50 of 14 - 22 % at 23 °C

Plane-Strain Fracture Toughnes

KIC

22 - 35 MPa·√m at 23 °C

Show 6000 Series materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23 °C

Typical for Wrought 6000 Series Aluminium

Poisson's ratio

ν

0.33 [-] at 23 °C

Show 6000 Series materials with Poisson's ratio of 0.33 [-] at 23 °C

Typical for Wrought 6000 Series Aluminium

Shear modulus

G

26 - 26.5 GPa at 23 °C

Show 6000 Series materials with Shear modulus of 26 - 26.5 GPa at 23 °C

Typical for Wrought 6000 Series Aluminium

Tensile strength

Rm

125 - 170 MPa at 23 °C

Show 6000 Series materials with Tensile strength of 125 - 170 MPa at 23 °C

Yield strength

YS

83 MPa at 23 °C

Show 6000 Series materials with Yield strength of 83 MPa at 23 °C

Yield strength Rp0.2

Rp0.2

60 - 90 MPa at 23 °C

Show 6000 Series materials with Yield strength Rp0.2 of 60 - 90 MPa at 23 °C

Thermal

Coefficient of thermal expansion

α

2.34E-5 1/K at 20 °C

Hide chart

Melting point

Tm

615 - 655 °C

Specific heat capacity

cp

900 J/(kg·K) at 23 °C

Thermal conductivity

λ

193 - 218 W/(m·K) at 23 °C

Electrical

Electrical conductivity

σel

2.90E+7 - 3.40E+7 S/m at 23 °C

Electrical resistivity

ρel

2.94E-8 - 3.45E-8 Ω·m at 23 °C

Chemical properties

Element

Weight %

Comment

Al

97.5 - 99.4 %

Mg

0.45 - 0.9 %

Si

0.2 - 0.6 %

Cr

0 - 0.1 %

Cu

0 - 0.1 %

More

Technological properties

Brazing

general: possible with commercial processes and methods

Corrosion properties

Stress corrosion cracking: no damage during operation and laboratory tests, general: very good, without protection in industrial or seawater atmosphere

General machinability

General: poor (T1, T4), sufficient (T5, T452, T6, T83, T831, T832)

Workability

general (condition): acceptable (T1, T4, T5, T452), poor(T6, T83, T831, T832)

This material data has been provided by MakeItFrom.com,ASM Handbook Volume 2 Properties and Selection: Nonferrous Alloys and Special-Purpose Materials,AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.