General
Property | Value | Temperature |
---|---|---|
Density | 2.7 g/cm³ Show Material materials with Density of 2.7 g/cm³ at 23.0 °C | 23.0 °C |
Mechanical
Property | Value | Temperature | Comment |
---|---|---|---|
Elastic modulus | 69 GPa Show Material materials with Elastic modulus of 69 GPa at 23.0 °C | 23.0 °C | |
Elongation | 15 % Show Material materials with Elongation of 15 % at 23.0 °C | 23.0 °C | |
Elongation A100 | 12 - 16 % Show Material materials with Elongation A100 of 12 - 16 % at 23.0 °C | 23.0 °C | |
Elongation A50 | 14 - 18 % Show Material materials with Elongation A50 of 14 - 18 % at 23.0 °C | 23.0 °C | |
Plane-Strain Fracture Toughnes | 22 - 35 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m at 23.0 °C | 23.0 °C | Typical for Wrought 6000 Series Aluminium |
Poisson's ratio | 0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-] at 23.0 °C | 23.0 °C | Typical for Wrought 6000 Series Aluminium |
Shear modulus | 26 - 26.5 GPa Show Material materials with Shear modulus of 26 - 26.5 GPa at 23.0 °C | 23.0 °C | Typical for Wrought 6000 Series Aluminium |
Tensile strength | 125 - 160 MPa Show Material materials with Tensile strength of 125 - 160 MPa at 23.0 °C | 23.0 °C | |
Yield strength | 77 MPa Show Material materials with Yield strength of 77 MPa at 23.0 °C | 23.0 °C | |
Yield strength Rp0.2 | 60 - 70 MPa Show Material materials with Yield strength Rp0.2 of 60 - 70 MPa at 23.0 °C | 23.0 °C |
Thermal
Property | Value | Temperature |
---|---|---|
Coefficient of thermal expansion | 2.34E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.34E-5 1/K at 20.0 °C | 20.0 °C |
2.3E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.3E-5 1/K at 23.0 °C | 23.0 °C | |
2.34E-5 1/K Show Material materials with Coefficient of thermal expansion of 2.34E-5 1/K at 100.0 °C | 100.0 °C | |
Melting point | 615 - 655 °C Show Material materials with Melting point of 615 - 655 °C | |
Specific heat capacity | 900 J/(kg·K) Show Material materials with Specific heat capacity of 900 J/(kg·K) at 23.0 °C | 23.0 °C |
Thermal conductivity | 193 - 218 W/(m·K) Show Material materials with Thermal conductivity of 193 - 218 W/(m·K) at 23.0 °C | 23.0 °C |
Electrical
Property | Value | Temperature |
---|---|---|
Electrical conductivity | 2.90E+7 - 3.40E+7 S/m Show Material materials with Electrical conductivity of 2.90E+7 - 3.40E+7 S/m at 23.0 °C | 23.0 °C |
Electrical resistivity | 2.94E-8 - 3.45E-8 Ω·m Show Material materials with Electrical resistivity of 2.94E-8 - 3.45E-8 Ω·m at 23.0 °C | 23.0 °C |
Chemical properties
Property | ||
---|---|---|
Aluminium | 97.5 - 99.4 % | |
Chromium | 0 - 0.1 % | |
Copper | 0 - 0.1 % | |
Iron | 0 - 0.35 % | |
Magnesium | 0.45 - 0.9 % | |
Manganese | 0 - 0.1 % | |
Other | 0 - 0.15 % | each 0.05, total 0.15, Rest Al |
Silicon | 0.2 - 0.6 % | |
Titanium | 0 - 0.1 % | |
Zinc | 0 - 0.1 % |
Technological properties
Property | ||
---|---|---|
Brazing | general: possible with commercial processes and methods | |
Corrosion properties | Stress corrosion cracking: no damage during operation and laboratory tests, general: very good, without protection in industrial or seawater atmosphere | |
General machinability | General: poor (T1, T4), sufficient (T5, T452, T6, T83, T831, T832) | |
Workability | general (condition): acceptable (T1, T4, T5, T452), poor(T6, T83, T831, T832) |