AA Standards Grade 7005 T53

Want to keep this datasheet? Save it now in your required format

Related Standards

Equivalent Materials

This material data has been provided by AluKey,MakeItFrom.com,ASM Handbook Volume 2 Properties and Selection: Nonferrous Alloys and Special-Purpose Materials,WroughtAl_ElectricalResistivity.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

23.0 °C

2.78 - 2.9 g/cm³

Show Material materials with Density of 2.78 - 2.9 g/cm³

Mechanical

PropertyTemperatureValueComment

Compressive modulus

23.0 °C

72.4 MPa

Show Material materials with Compressive modulus of 72.4 MPa

Elastic modulus

23.0 °C

71 GPa

Show Material materials with Elastic modulus of 71 GPa

Elongation

-269.0 °C

16 %

Show Material materials with Elongation of 16 %

Elongation in 50 mm

-196.0 °C

16 %

Show Material materials with Elongation of 16 %

Elongation in 50 mm

-80.0 °C

13 %

Show Material materials with Elongation of 13 %

Elongation in 50 mm

-28.0 °C

14 %

Show Material materials with Elongation of 14 %

Elongation in 50 mm

23.0 °C

10 %

Show Material materials with Elongation of 10 %

Elongation in 50 mm

24.0 °C

15 %

Show Material materials with Elongation of 15 %

Elongation in 50 mm

100.0 °C

20 %

Show Material materials with Elongation of 20 %

Elongation in 50 mm

149.0 °C

35 %

Show Material materials with Elongation of 35 %

Elongation in 50 mm

204.0 °C

60 %

Show Material materials with Elongation of 60 %

Elongation in 50 mm

Elongation A100

23.0 °C

9 %

Show Material materials with Elongation A100 of 9 %

Elongation A50

23.0 °C

10 %

Show Material materials with Elongation A50 of 10 %

Fatigue strength

23.0 °C

231 MPa

Show Material materials with Fatigue strength of 231 MPa

fo 5x10⁸ cycles

Plane-Strain Fracture Toughnes

23.0 °C

22 - 35 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22 - 35 MPa·√m

Typical for Wrought 7000 Series Aluminium

Poisson's ratio

23.0 °C

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Typical for Wrought 7000 Series Aluminium

Shear modulus

23.0 °C

26.9 GPa

Show Material materials with Shear modulus of 26.9 GPa

Shear strength

23.0 °C

221 MPa

Show Material materials with Shear strength of 221 MPa

Tensile strength

-269.0 °C

641 MPa

Show Material materials with Tensile strength of 641 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

-196.0 °C

538 MPa

Show Material materials with Tensile strength of 538 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

-80.0 °C

441 MPa

Show Material materials with Tensile strength of 441 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

-28.0 °C

421 MPa

Show Material materials with Tensile strength of 421 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

23.0 °C

345 - 400 MPa

Show Material materials with Tensile strength of 345 - 400 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

24.0 °C

392 MPa

Show Material materials with Tensile strength of 392 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

100.0 °C

303 MPa

Show Material materials with Tensile strength of 303 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

149.0 °C

165 MPa

Show Material materials with Tensile strength of 165 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

204.0 °C

97 MPa

Show Material materials with Tensile strength of 97 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

Unlock all property charts

Yield strength

23.0 °C

350 MPa

Show Material materials with Yield strength of 350 MPa

Yield strength Rp0.2

-269.0 °C

483 MPa

Show Material materials with Yield strength Rp0.2 of 483 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

-196.0 °C

421 MPa

Show Material materials with Yield strength Rp0.2 of 421 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

-80.0 °C

379 MPa

Show Material materials with Yield strength Rp0.2 of 379 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

-28.0 °C

359 MPa

Show Material materials with Yield strength Rp0.2 of 359 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

23.0 °C

305 MPa

Show Material materials with Yield strength Rp0.2 of 305 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

24.0 °C

345 MPa

Show Material materials with Yield strength Rp0.2 of 345 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

100.0 °C

283 MPa

Show Material materials with Yield strength Rp0.2 of 283 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

149.0 °C

145 MPa

Show Material materials with Yield strength Rp0.2 of 145 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

204.0 °C

83 MPa

Show Material materials with Yield strength Rp0.2 of 83 MPa

up to 10000 h at temperature, at 35 MPa/min to yield strength and then at strain rate of 5%/min to fracture

Unlock all property charts

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

2.3E-5 1/K

Show Material materials with Coefficient of thermal expansion of 2.3E-5 1/K

Melting point

610 °C

Show Material materials with Melting point of 610 °C

Specific heat capacity

23.0 °C

880 J/(kg·K)

Show Material materials with Specific heat capacity of 880 J/(kg·K)

Thermal conductivity

23.0 °C

121 - 170 W/(m·K)

Show Material materials with Thermal conductivity of 121 - 170 W/(m·K)

Typical for Wrought 7000 Series Aluminium

Electrical

PropertyTemperatureValueComment

Electrical conductivity

23.0 °C

2.20E+7 S/m

Show Material materials with Electrical conductivity of 2.20E+7 S/m

Typical/derived value

Electrical resistivity

23.0 °C

4.54E-8 Ω·m

Show Material materials with Electrical resistivity of 4.54E-8 Ω·m

Typical value

Specific Electrical conductivity

38 % IACS

Show Material materials with Specific Electrical conductivity of 38 % IACS

Typical value

Chemical properties

PropertyValueComment

Aluminium

91 - 94.7 %

Show Material materials with Aluminium of 91 - 94.7 %

Chromium

0.06 - 0.2 %

Show Material materials with Chromium of 0.06 - 0.2 %

Copper

0 - 0.1 %

Show Material materials with Copper of 0 - 0.1 %

Iron

0 - 0.4 %

Show Material materials with Iron of 0 - 0.4 %

Magnesium

1 - 1.8 %

Show Material materials with Magnesium of 1 - 1.8 %

Manganese

0.2 - 0.7 %

Show Material materials with Manganese of 0.2 - 0.7 %

Other

0 - 0.15 %

Show Material materials with Other of 0 - 0.15 %

each 0.05, total 0.15, Rest Al

Silicon

0 - 0.35 %

Show Material materials with Silicon of 0 - 0.35 %

Titanium

0.01 - 0.06 %

Show Material materials with Titanium of 0.01 - 0.06 %

Zinc

4 - 5 %

Show Material materials with Zinc of 4 - 5 %

Zirconium

0.08 - 0.2 %

Show Material materials with Zirconium of 0.08 - 0.2 %

Technological properties

Property
Brazing

general: Lötbar mit speziellen Techniken oder bei bestimmten Anwendungen