Show me around
AA Standards Grade 1100 H112
Description
Related Standards
Equivalent Materials
Ashby charts
See where AA Standards Grade 1100 H112 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.
Properties
General
Density
ρ2.71 - 2.8 g/cm³ at 20 °C
Dimension
Dimensions
Wanddicke
Mechanical
Elastic modulus
E69 GPa at 20 °C
Elongation
A21 % at 20 °C
Elongation A100
A10012 - 22 % at 20 °C
Elongation A50
A509 - 25 % at 20 °C
Plane-Strain Fracture Toughnes
KIC22 - 35 MPa·√m at 20 °C
Typical for Wrought 1000 Series Aluminium
Poisson's ratio
ν0.33 [-] at 20 °C
Typical for Wrought 1000 Series Aluminium
Shear modulus
G25.9 GPa at 20 °C
Typical for Wrought 1000 Series Aluminium
Tensile strength
Rm75 - 90 MPa at 20 °C
Yield strength
YS36 MPa at 20 °C
Yield strength Rp0.2
Rp0.220 - 50 MPa at 20 °C
Thermal
Coefficient of thermal expansion
α2.36E-5 - 2.4E-5 1/K at 20 °C
Melting point
Tm640 - 655 °C
Specific heat capacity
cp900 J/(kg·K) at 20 °C
Thermal conductivity
λ218 - 222 W/(m·K) at 20 °C
Electrical
Electrical conductivity
σel3.30E+7 - 3.42E+8 S/m at 20 °C
Electrical resistivity
ρel2.94E-8 - 3.03E-8 Ω·m at 20 °C
Chemical properties
Element
Weight %
Comment
99 - 100 %
0.05 - 0.2 %
0 - 1 %
0 - 0.05 %
0 - 0.15 %
each 0.05, total 0.15, Si + Fe < 0.95
Technological properties
Brazing
general: possible with commercial processes and methods
Corrosion properties
Stress corrosion cracking: no damage during operation and laboratory tests, general: very good, without protection in industrial or seawater atmosphere
General machinability
General: not suitable (O, H12), poor (H14, H16, H18)
Workability
general (condition): good (O, H12, H14), acceptable (H16), poor(H18)
This material data has been provided by MakeItFrom.com,AluKey.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.
